The Swedish geographer Gerd Enequist (1903-1989) left behind great amounts of private and work material when she passed away. This was donated to the University Library of Uppsala, Carolina Rediviva, in three different accessions. This resulted in three different record. The subject of this report is the progress of assembling these record into one complete record.The registering led to many important decisions such as the role of provenance and the relation of private and public documents. Above all the special nature of personal archives have been a topic of discussion.

At the end of August 1999, the local government council of Malmö city decided thatthe area known as Kvarteret Bilen would be made available for the European HousingExhibition 2001 (Bo01-mässan). Kvarteret Bilen extends over approximately 80hectars and includes the western parts of the Western Harbour area (Västra hamnen)of Malmö.Kvarteret Bilen as a whole, but especially the western sections of this area, the socalledBo01 section, has been the subject of heated discussions. This is mainly due tothe fact that the ground in question has proven to be contaminated to a certain extentby different chemical compounds. Investigations undertaken during 1998 showed sporadically high concentrations forespecially one chemical group: polycyclic aromatic hydrocarbons (PAH).The first part of the paper describes the use of a mathematical equation (Fetter 1994)to calculate the concentration of PAH from a continuous discharge at a given time byemploying Geographical Information System (GIS). Even the constraints of theequation are discussed, as well as the consequences that follow as a result of usingGIS.The second part of the paper focuses on the connections between the content ofcarcinogenic PAH in Kvarteret Bilen and the ground water level and type of fillingmaterial.

The thesis has as purpose to describe and analyse a decision made be the Swedish tax committee in which it was decided that a cooperative economical associations selling price, which was less than the comparable public bonds market price, would be the focus of a withdrawal tax. There are exceptions from a withdrawal tax, that is if the transaction has a business motivation. However the concept, business motivation, is narrowly interpreted both in the preparatory works and in case law, which makes it irrelevant to the situation at hand. A cooperative economical association is a form of association nearest akin to the limited companies. These types of associations have as purpose to increase their owners wealth with the benefit of freedom from personal responsibility.

The Baltic Sea is one of the world?s most polluted seas. Increased discharge of nutrients due to greater populations of people, together with a slow water exchange, creates great stress on the sea. Too much nutrients leads to increased growth of algae and causes problem in the ecosystem. Even if we reduce nutrient discharge the problem still exist in the ocean. When algae dies and sinks, more nutritional substances is produced called "internal eutrophication". This phenomenon will grow in the future due to a warmer climate and the problem is spreading towards the coastal zone, which is an important site for fish recreation. By removing the abundance of algae, the nutritional and toxic substances are reduced and the algae biomass can be a future resource for biofuel production..

When you talk with the municipal housing companies today there is a general view that theyare doing all the work when it comes to social responsibilities in the municipalities, theprivate landlords only have a focus on profit. The private landlords doesn't agree but says thatthey take a social responsibility, at the same time there is a difference in what socialresponsibility is. By looking at how the picture of CSR and its use is seen today we analyzewhy the opinions and definitions about social responsibility differ. We also look at CSR in itslocal adaptation in Sweden's special conditions at the same time as we compare it to CSR inEurope and the world. We thereby create an analysis of how CSR is perceived, prioritized anddeveloped in Sweden to see the root of the disagreements.In our study we show how different views and roles in the community influence the picture ofCSR in Sweden.

The aim of this thesis is to describe how service companies through adjustment of the customer?s zone of tolerance can influence customer?s perception of the service during the processes of service delivery and create customer satisfaction. The method used was case study approach utilizing personal interviews, which were conducted at two service companies. The study showed that the aspects of the service that have greatest importance for the customer?s assessment of the service and customer satisfaction among others are personal treatment and that personel behave in the way that makes the customer feel itself taken good care of and unique.

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

This essay is about the origin, planning and establishment of the European Space Research Organisation's (ESRO) sounding rocket base Esrange outside Kiruna in Northern Sweden. Three main questions are examined. First I show there were not just scientific and technical but also political, economical as well as military reasons to build a European rocket base. Second, I scrutinize the reasons to choose Northern Sweden as the location for the rocket base. As it turns out, the main reasons were the favourable location of Northern Sweden within the aurora oval zone, the proximity of the Kiruna Geophysical Observatory, and the possibility to use a large, although not quite uninhabited, area where the launched rockets could crash.

Hanterbara båtar is a new company who builds alumina boats customized for people in wheelchairs. Due to the fact that the company only built two boats yet, the production documentation is not complete. The drawing that does exist is not in an exact standard which makes production planning harder.The purpose of this work has been to make the production of the boat easier and simplify further development and modification. Product development in the form of optimizing details is also one of the main purpose of this work.This is all done by making a 3D-assembly of all the existing drawings. After this is done new drawings will be made and added to the main assembly.

The purpose of this paper is to describe and analyse the Chinese destination of Hainan, with background in a globalizing tourism destination development, for tourism from Finland and Sweden. The questions at issue are regarding what kind of an impact the status as a special economic zone have had upon Hainan, what kind of conditions there are for tourism on the island, in what form participants of the tourism industry want the development to proceed, what the prevailing trend is for distant destinations for Nordic markets and also regarding what kind of potential there is for organized tourism to Hainan from Finland and Sweden.As a foundation for the paper, I?ve composed a theoretical reference for knowledge of China, Hainan and the study of destinations. The sources of secondary kind are literature related to the subject. The primary sources are mainly interviews, field work done at Hainan has given a concrete and personal knowledge of the place.

The water tower in Uppsala city forest was built in the late 1950's in what is now a nature reserve. The unique place was supposed to be visited by people, which is currently not the situation. This bachelor thesis aimed to perform an analysis and make a design proposal for the environment surrounding the water tower. The analysis was performed using the methodology previously described by architect Arne Branzell. The methodology focuses on how a space is perceived by a person moving through it.

The main purpose of this M. Sc. thesis is to increase the knowledge about managing urban forestry for recreational use. The analysis is focusing on differences between visitors? experiences in the north and south of Sweden, represented by Nydalasjön and by Härlanda tjärn.

According to Swedish school policy documents, every teacher?s assignment is to individually adapt the education to meet every student?s needs. There are no exact guidelines about how to make these adaptations. The purpose of this study is to investigate how six teachers interpret the policy documents and how they, according to themselves, work to achieve this. This study is built on six interviews with teachers who work with children in the ages from seven to ten.

This master's thesis reports on our investigation of how the public librarian's professional identity is formed and what it is formed of. We have considered factors such as: education, competence and daily tasks. In order to fulfil this aim we have used a literature study on concepts such as competence, education, professional identity and profession. We have also carried out an empirical study where we have interviewed nine librarians on public libraries. The method of analysis is qualitative.

Just how far is it possible to make learning of new parts for recognition and robot picking autonomous? This thesis initially gives the prerequisites for the steps in learning and calibration that are to be automated. Among these tasks are to select a suitable part model from numerous candidates with the help of a new part segmenter, as well as computing the spatial extent of this part, facilitating robotic collision handling. Other tasks are to analyze the part model in order to highlight correct and suitable edge segments for increasing pattern matching certainty, and to choose appropriate acceptance levels for pattern matching. Furthermore, tasks deal with simplifying camera calibration by analyzing the calibration pattern, as well as compensating for differences in perspective at great depth variations, by calculating the centre of perspective of the image.