This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

When migration to a country increases, the integration of the migrants becomes extra important for the host country?s society, economy and culture. In the last decade, Europe has faced several crises, such as the refugee crisis and the covid-19 pandemic, which has affected both migration and integration policy. The challenges that have characterized European society in recent years makes it interesting to study how the measures highlighted by the European Commission to integrate migrants has developed. Therefore, the paper aims to compare the Commission?s action plans for integration published in 2016 and 2020 based on the threat theory and the contact theory to see how both perspectives can contribute to understanding the differences between the years and which theory is best suited to understand the Commission?s current visions of integration.

The purpose of this study has been to investigate students? perceptions of the content inthe Swedish subject and current syllabus for Swedish in the third year of uppersecondary school. The purpose has also been to analyze if students are familiar with theaims they are working towards, how explicit they are and if they have any significancefor the students? results and motivation. This investigation is based on a socio-culturalperspective and was made with help of a quantitative method by using questionnaires,but has also been studied to some extent qualitatively, which have been analyzed from astudent angle.The analysis of the results shows that the students have very good perception ofwhat they should study in Swedish year three in upper secondary school.

As the field of marketing becomes increasingly competitive, creative tools to reach the intended consumer needs to be utilized. In order to break through the crowded airways and packed ad space, one can choose to direct the message through channels that relate to currenttrends in society, while using innovative artistic concepts. The fundamental purpose behind this report is to provide a roadmap for creating a successful and unique marketing campaign. In addition, we have attempted to identify how visual methods can add valuable attributes to the campaign, ensuring a more progressive and distinct impression. To illustrate our claims, we have chosen to analyze Wasabröd?s latest marketing effort, ?Change Bread,? by dividing it into three sections, including planning, execution, and the visual creation.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The main aim of this research was to investigate four humour styles, affiliative, self-enhancing, aggressive, and self-defeating humour, and compare these with emotional perception. Forty-eight persons took part in the research, 27 women and 21 men living in the southern part of Sweden. Two humour tests were used: the Humour Scale Questionnaire ? HSQ, with 32 items, and a newly composed video test, assembled after pilot testing from 26 video clips, the Humour Video Questionnaire ? HVQ. To measure perception and interpretation of emotion, the revised version of the ?Reading the Mind in the Eyes? Test was used.

Vargaslätten is a 15 hectare large privet garden in Halland in the south-west of Sweden.In the beginning of the 1990s Gunnar O.Westerberg, the owner of Vargaslätten,commissioned a work from the young landscapearchitect, Rolf Efvergren, to writeVargaslätten ? tillägnad naturen. It was a discribing work of the current status of the gardenand the summer-house of Vargaslätten. Vargaslätten ? tillägnad naturen was acomprehensive work with a detalied inventory of all the plants, the buildings, the descriptionof the surroundings and the history.

The first Debt Relief Act was introduced in 1994 into Swedish law. The old Debt Relief Act was replaced on 1 January 2007 by the current Debt Relief Act. The current law is in many ways similar to the older law. The main change is the debt settlement process.The Debt settlement Act's main purpose is to financially rehabilitate over-indebted individuals. This aim should be balanced against the creditors' interest in getting paid for their claims.

Within today?s organizations there is continual development work to increase efficiency and the power to compete at the market. Production development with focus on continual improvements constitutes an important part of the daily work within a lot of organizations today.The purpose of this study is to contribute to a part of the development process that Volvo Penta factory in Vara has in mind. A description of the current situation was compiled by mapping the internal runnings and material flow throughout the factory. A new suggestion for a layout and a comparison with the current situation will assist with creating a factual basis for the development of a new goods reception.A study was made where the volumes and the quantity of the daily arrival goods were settled.

The aim of this review is to assess the ethical implications of aquaculture, regarding fish welfare and environmental aspects. The aquaculture industry has grown substantially the last decades, both as a result of the over-fishing of wild fish populations, and because of the increasing consumer demand for fish meat. As the industry is growing, a significant amount of research on the subject is being conducted, monitoring the effects of aquaculture on the environment and on animal welfare. The areas of concern when it comes to animal welfare have here been divided into four different stages: breeding period; growth period; capturing and handling; and slaughter. Besides these stages, this report includes a chapter on the current evidence of fish sentience, since this issue is still being debated among biologists.

The purpose of this thesis was to create a saw pattern program for the sawmill industry. I have chosen to focus on the module that describes the shrinking on the wood. There are several theories about how the wood deforms by shrinking. Several hypotheses were simulated in the program and after testing them I decided to use only one of them (hypothesis C). The program is written in Visual Basic .NET and I choused that program language because it is easy to do changes in the layout. Another great advantage in Visual .Net is that you can mix different languages in the same program.

In 1996, the Swedish government deregulated the Swedish electricity market. As a consequence of the deregulation, Swedish customers could start to freely choose between different electricity companies. Different enterprises have tried various strategies in order to shape their image to attract new customers; often focusing on an image revolving around price and environmental friendliness.The purpose of this essay has been to analyze customers? relations to the electricity market. In order to analyze customers? relations a quantitative study has been conducted; focusing on customer satisfaction and customer commitment.

The purpouse of this study is to find out how and if a Content Managment System (CMS) can benefit from applied User Experience Design (UX). A work project has been executed where a client wanted the students to create a user friendly CMS for adding content to a global hotel review site. A prototype of a CMS was created based on literature studies about UX and CMS. The prototype of the user friendly CMS was then tested through user tests and interviews with key users. After input from the key users the prototype was changed until the users were satisfied with it..

In 1996, the Swedish government deregulated the Swedish electricity market. As a consequence of the deregulation, Swedish customers could start to freely choose between different electricity companies. Different enterprises have tried various strategies in order to shape their image to attract new customers; often focusing on an image revolving around price and environmental friendliness.The purpose of this essay has been to analyze customers? relations to the electricity market. In order to analyze customers? relations a quantitative study has been conducted; focusing on customer satisfaction and customer commitment.

The frequency of innovative procurement is currently very low in Sweden. Innovative procurement is to procure unknown solutions to a defined problem or need for which it sometimes has not yet been established on the market.  Current Swedish procurement legislation does not prevent innovation procurement, however, it limits official authorities to actively work with innovative companies to develop new solutions. Furthermore, some conflicts arise between the Swedish procurement legislation and the basic principles concerning public procurement developed under EU law, which must be considered in all procurements. Additionally, there is not a specific procurement procedure designed for innovative solutions in the current legislation.On the 15th of January 2014 three new directives on procurement rules were adopted with the general objective to simplify the procurement process and to make the whole system more flexible. A new procurement procedure has also arisen called innovation partnership.