AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

Today an increasing number of schools and organizations are investing in so called Learning Management Systems. Researchers disagree on the pedagogical value of these tools. Some mean that Learning Management Systems cement old-fashioned behaviouristic teaching practices; others mean that the systems provide good opportunities in supporting learning in a socio cultural perspective. The aim of this study is to reach better understanding and increased knowledge of how the introduction of a Learning Management System influences the role of the teacher and how the learning is organized. We have conducted two case studies.

Since the beginning of the twenty-first century, China has captivated global attention due to its astonishing economic growth. This development has resulted in an enormous growth in foreign direct investments, as well as the country?s new role aseconomic super power. When joining the World Trade Organization in 2001, China agreed to adhere to the minimum requirements of the organization?s several multilateral agreements.

The purpose of this essay was to study how surroundings form young peoples gender and where gender patterns are maintained. This was done by interviewing 12 students from two advanced classes at a comprehensive school in a small town in the southern parts of Sweden. The students where divided into four groups. Two groups with three boys in each, and two groups with three girls in each. We used R.W.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

Because of the increasing numbers of international tourist arrivals each year it is essential that tourist operators are aware of the impacts that tourism generate. Tourism affects the world in an environmental, social and economic way, positive but also in a negative way. To travel responsible and sustainable is therefore important, and operators have a responsibility in this subject.Because of this I wanted to look at how Swedish tourist operators manage responsible tourism, together with what amount of information their customers receive about this. To be able to study how operators work with this I conducted three interviews via email. The tourist operators were of different sizes and specializations to receive a more extensive result.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

BackgroundDiathermy is the most commonly used surgical instrument in the surgical area today. Diathermy is used in surgery to cut and coagulate tissue. The use of diathermy releases chemical substances in to the environment in the form of diathermy smoke. Research shows that these chemical substances pose health risks to both staff and patient exposed to the smoke. To protect the interdisciplinary, perioperative team from the smoke, smoke evacuation systems can be used.ObjectiveThe purpose of the study is to highlight the work environment of the perioperative team when working with diathermy smoke.MethodThe study is meant to be implemented as an empirical descriptive sample survey.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

The use of ERP in organisations is very popular and many companies have embraced this paradigm without really questioning why. Problems therefore often arise and cause high costs which is a result of poor planning. The paradigm also has its origin in the traditional architectural design that creates a system that has difficulties to adapt to organizations that are constantly evolving. The purpose of this study is to provide a different view of how IT-systems can operate within an organization and show how standard systems can be structured. We emanated from a case study at Linköping University Library, where we studied the implementation and integration of a standard system called Symphony.

The scope of this master´s thesis is the issue of usability in relation to interface design,in particular the interface of a university library´s online public accessed catalogue, orOPAC. Since the OPAC can be seen as the library´s ?shop window? to the world, it isof great importance that the interface to the OPAC can be used by patrons witheffectiveness, efficiency and satisfaction.The master´s thesis is based on a qualitative study performed at Karolinska InstitutetsUniversity library, and contains both a usability evaluation and an interview study. Twointerfaces were evaluated: a standard web interface provided by the system supplier, andan interface developed in-house by Karolinska Institutet´s systems department. The twointerfaces are both connected to the same online library catalogue, thus making possiblea comparative study..

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

Robotic milking in Automatic Milking systems (AMS) is proposed to reduce manual labour and at the same time increase milk yield by increasing milking frequency. In order to increase milking frequency, it is essential to have well-functioning cow traffic. Investing in an AMS is a great capital investment for the farmer, thus it is of major importance to ensure maximal AMS capacity. This study investigated the effect of the traffic systems Feed First? and Free cow traffic with and without waiting area (WA) on cow performance and AMS capacity.

In the near future we need to reduce the greenhouse gas emissions significantly for the benefit of the environment around us. The European Union has de-manded a variety of climate and energy goals to be achieved by year 2020, the ?20-20-20? targets. With these aims, The European Union means that we must reduce our emissions from fossil fuels and instead increase our renewable fuels. With stump harvest in the forest it?s possible to increase the use of renewable fuels and reduce our emissions from fossil fuels.