Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

Utförandet av radikal prostatektomi, det vill säga borttagande av prostatakörteln vid prostatacancer, har tills nyligen utförts antingen med traditionell öppen kirurgi eller med laparoskopisk kirurgi, så kallad titthålskirurgi. I slutet av 1990-talet introducerades emellertid ett tredje alternativ för utförande av detta ingrepp, nämligen den robotassisterade kirurgin. Användandet av denna typ av kirurgi, som är en vidareutveckling av den konventionella laparoskopiska kirurgin, medför såväl konstaterade som potentiella fördelar. Till dessa hör en ökad precision i ingreppen, vilket orsakar mindre smärta och blödning, samt eventuellt även bättre resultat angående urininkontinens och impotens vilka är vanliga biverkningar av radikal prostatektomi. Användandet av robotassisterad kirurgi istället för öppen respektive konventionell laparoskopisk kirurgi för utförande av radikal prostatektomi har förutom intressanta medicinska aspekter även relevanta ekonomiska aspekter.

Predatory pricing is one of the most frequently discussed topics in competition law and should be considered both from a legal and economic perspective. The concept of predatory pricing can bedescribed as a situation where a company is pricing at a level that, according to the assessment theories, is unreasonably low. The problems with this type of conduct arises when the low prices hinder competition. A company which uses predatory pricing will likely deter rivals entry to the market or drive the existing ones out of it. In the long run, the effects on competition will likely be higher prices which will hurt customers and consumers as well as competition.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

I dagens finansiella marknad utsätts de finansiella aktörerna för risk på sin strävan efter lönsamhet. Balansgången mellan att maximera verksamheten och risk har öppnat ögonen och ökat medvetenheten om behovet av att utvidga sina krav på att täcka upp kapital.Efterfrågan på snabba, pedagogiska och säkra sätt att lätt kunna beräkna risk har därför snabbt ökat. Under de senaste åren har det därför blivit allt populärare att använda sig av riskmåttet ?Value at Risk? vilket kan definieras som; ?En portföljs maximala värdeminskning med en viss sannolikhet inom en viss tidsperiod? Jag har valt att göra en jämförelse mellan de två vanligaste modellerna som används för att räkna fram Value at Risk, Historisk simulering och Varians-/kovarians-metoden. De två modellerna kommer att testas mot tre olika tillgångar, guld, valutakurs Sek/£ samt aktieindex.

SIDA?s relief work in Bosnia aims at making the country ready for a membership in the EU where the main focus lies in the creation of a sustainable state as well as liberalizing the market to create an increased economic cooperation between Bosnia and the rest of Europe. These ambitions are closely related to the neo-liberal theory of state building which aims at creating democratic societies in line with the western democracy model, with a liberal economy constituting its base. Despite generous financial aid, the democratic and economic development in Bosnia is moving very slowly and the ethnical tensions seem to grow despite international involvement in the country. The purpose of this study is to evaluate SIDA?s present relief work in Bosnia out of a peace perspective.

As the globalization of companies increases day by day, the need for a clear and comprehensible legislation to overcome the problems with transfer pricing transactions increases as well. Incorrect pricing in transfer pricing situations between companies with close economic ties to each other makes countries risk parts of their taxation income.Swedish legislation uses the internationally accepted arm?s length principle to regulate the transfer pricing transactions. Through the correction rule, the rule is upheld that the pricing between two companies with close economic ties to each other must apply to the same conditions as it would have been if it was between two companies without close economic ties to each other.To ensure that enough material is provided to base the assumption whether or not the correction rule has been followed or not, Swedish legislation provides a number of paragraphs to regulate the matter. The legislation is spread all over and is hard to interpret.

Introduction/Background: Economic evaluations help decision-makers to make informed decisions regarding resource allocation. Information generated from CEA can support evaluations of a new intervention with current praxis. The evaluations also provide information as to whether an intervention is cost-effective, both in economic terms and in health gains. Objective: The aim of this thesis is to investigate the use of economic evaluations in public health, with a focus on CEA. Use of economic evaluations is regarded as both a method for evaluation and as support for informed decisions.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Innovation has been identified as one of the key factors for economic growth long ago. However, the emergence of ?knowledge century? further strengthened the role of the concept since proper management of the knowledge is essential to make the best out of the innovative capacity of the companies as well as the countries. This necessitates a balanced intellectual property rights (IPR) systems, since these rights provide the basis to solve the market failures faced by innovating firms by creating property rights over knowledge. There is an inherent dilemma between invention and diffusion.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

The ÅF Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the ÅF Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of ÅF-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.