Safety and risk management currently have a starting point based on the negative outcome of safety, thus the lack of safety. The starting point for the thesis is to find a way to measure the positive outcome of safety through ergonomic aspects regarding chemical plants that are covered of the Seveso II Directive.Through a literature study of safety and ergonomics fourteen key aspects of safety were found. Safety Performance Indicators (SPI's) are used to assess the fourteen identified proactive indicators of safety. An analysis in three steps - called risk status assessment - is design to give an SPI its value. A pilot study of the risk status assessment was performed at the ethanol producer Lantmännen Agroetanol in Norrköping, Sweden..

In recent decades, demands has emerged that the companies shall take a greater social responsibility for the impact that they have on their environment and that this impact shall be reported, which is known as Sustainability Reporting. The Sustainability Report is based on a number of general principles that ensure the content and the quality of the Sustainability Report. One of these principles is the principle of completeness. In the research, this principle seems to have been interpreted in terms of number of reported aspects and indicators, which can be a limited view where only the existence of the aspects and indicators is observed. By including the degree of the reporting in terms of full, partial and no reporting as well as a comparison between the real and the alleged reporting, our intention is to extend the principle of completeness and to develop a tool that we also apply through an empirical survey in a particular area.

Sweden?s energy consumption is divided into three major sectors. One of them is the industry sector. One third of Sweden?s energy consumption is converted in the industries.

In recent decades, demands has emerged that the companies shall take a greater social responsibility for the impact that they have on their environment and that this impact shall be reported, which is known as Sustainability Reporting. The Sustainability Report is based on a number of general principles that ensure the content and the quality of the Sustainability Report. One of these principles is the principle of completeness. In the research, this principle seems to have been interpreted in terms of number of reported aspects and indicators, which can be a limited view where only the existence of the aspects and indicators is observed. By including the degree of the reporting in terms of full, partial and no reporting as well as a comparison between the real and the alleged reporting, our intention is to extend the principle of completeness and to develop a tool that we also apply through an empirical survey in a particular area.

When a company seeks to enter a new market, the multiple choices of possible new business relationships exist. Further, establishing new relationships is a time-consuming procedure associated with high uncertainty and high costs. Hence, if the firm does not succeed in pinpointing the most suitable business partners to collaborate with, the firm may both forfeit other possible good relationships, as well as resources invested. Based on this notion the aim of this thesis is to explore how a manufacturing company can base the selection of future dealership Business-to-Business partners by evaluating indicators of a possible business relationship?s potential to become successful. The choice of focusing on the Business-to-Business relationship between a manufacturer and a dealership company originates from being influenced by the issues facing the Swedish agricultural machinery manufacturer Väderstad-Verken AB, who is putting attention to explore the US market.

In recent decades, demands has emerged that the companies shall take a greater social responsibility for the impact that they have on their environment and that this impact shall be reported, which is known as Sustainability Reporting. The Sustainability Report is based on a number of general principles that ensure the content and the quality of the Sustainability Report. One of these principles is the principle of completeness. In the research, this principle seems to have been interpreted in terms of number of reported aspects and indicators, which can be a limited view where only the existence of the aspects and indicators is observed. By including the degree of the reporting in terms of full, partial and no reporting as well as a comparison between the real and the alleged reporting, our intention is to extend the principle of completeness and to develop a tool that we also apply through an empirical survey in a particular area.

The Swedish Government has set a target to reduce energy consumption through energy efficiency within the construction and real estate sector. The purpose of the study is to examine how energy efficiency within this sector could affect the district heating volume in the future, on basis of Vattenfalls district heating system in Uppsala.An Excel model has been created to study how energy effficiency measures affects district heating demand in buildings by 2045, based on technical and economicalconditions. Furthermore, an interview study has been conducted to examine incentives for district heating customers to invest in energy efficiency measures.Result of the Excel model shows that the district heating volume of Vattenfall in 2045 is expected to 931 GWh, which corresponds to a volume decrease of 10,6 %. Based on the study?s theoretical framework only 15 %, 1 024 GWh, of the technical-economical potential is assumed to be implemented.

Rapid population growth and the fact that phosphorous is a limited resource implies that the question regarding an efficient use of phosphorus is of great importance, and consequently,that the phosphorous use efficiency should be as high as possible. The view on phosphorous use efficiency, and how this is calculated, has varied over time. This has had great implications on what type of research that has been conducted, which have resulted in an inconsistency between the academic?s view on the subject and recommendations received by farmers. The purpose of this paper is to calculate the phosphorus use efficiency in the Swedish long term fertility experiments.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The development aid from Sweden to developing countries is a activity thatinvolves a great deal of monetary founds as well as an opportunity to influence the environmental situation in a partner country. It´s also an opportunity to promote Sweden's values in a field like the environment, setting a good example is important. This thesis aims to evaluate Sida´s environmental policy and find out if there in fact is a Environmental Policy Integration Policy (EPI) taking place. EPI is a policyimplementation theory that emphasise the importance of the total integration of the environmental in the organisation as a whole. To identify this I will use a theoretical framework of indicators invented by William M.

The purpose of this research is to examine the implications of the provisions in the Swedish Code of Corporate Governance (the Code) concerning auditor attestation of the internal control report. We will focus on how the auditors? augmented responsibilities will affect the efficiency in the audit process.Our research indicates that the main benefit from reviewing the internal control report is achieving more reliable internal controls, which results in greater prevention of misstatements in the financial statements. This will affect the efficiency in the audit process since the auditor can place more reliance on internal controls when performing audit procedures. This implies that the benefits of preventing misstatements could outweigh the efforts and resources spent on reviewing the internal control report..

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

Title: Audit teams ? what affects the efficiency?Authors: Petter Johansson and David RubinSupervisor: Andreas JanssonCourse: Dissertation Accounting, 4FE03E, 30 ECTS, Spring 2011.Key Words: Audit team, Efficiency, Team WorkBackground and problem: Theory and literature in the field of audit teams?efficiency are limited. The theory and literature that existed was not conducted inSwedish context. It was identified that no one had examined the factors thatinfluence the efficiency of the Swedish audit team's. Efficiency affects howresource-and cost-effective an auditing firm can be while the audit is performedwith quality and therefore it is of interest to be examined.Purpose: The purpose of this thesis is to explore and explain what may affectSwedish audit teams? efficiency during the work processMethod: The thesis has been based on existing theory and literature to explainwhat affects audit teams? effectiveness.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Animal welfare can be measured in several different ways; for example by using animal-based measurements. It has been shown that register data from the Swedish Official Milk Recording Scheme can be helpful when identifying herds at risk of having poor animal welfare, which led to a development of the advisory service of ?Ask the Cow? and the web report ?Animal Welfare Signals?. The aim of this project was to find out if register data from ?Animal Welfare Signals? can be used as a screening tool for detecting herds at risk of having poor animal welfare and in need of an ?Ask the Cow?.