There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

Nowadays Wireless LAN is playing a more and more important role in network systems. After 1999, in which the IEEE organization published its Wireless Local Network standard 802.11[1], many people saw the advantages of the standard but also the lack of support for multimedia streaming. A lot of research work has been done on the proposed IEEE 802.11e standard draft during the past 4 years. It is supposed to be able to fully support Quality of Service. The final version will be published early in 2004.

This study examines the factors that influence the seasonal movements of Golden Eagles (Aquila chrysaetos), and can thus provide important information that helps to improve the protection of the species. There were two main purposes of this study. First, I wanted to analyze the difference between preferences of juvenile and adult Golden Eagles in their choice of southern or northern hibernation areas. Do younger eagles prefer moving longer distance to southern areas of Sweden? Second, I wanted to investigate how the climate influenced the choice of date of migration in the fall.

The government appointed in 2004 a special investigator with the objective to investigate the possibility of introducing a new law concerning implementation of obligatory cash registers with certain certification. This resulted in SOU 2005:35 ?Krav på kassaregister - Effektivare utredning av skattebrott? (Proposition 2006/07: 105). Following advice received from the respondents, the government has drafted a bill submitted to parliament in March 2007. Government bill 2006/07: 105 proposals for new law on cash registers, and submitted to parliament 2007th Act (2007:592) on the cash register was adopted by parliament in March that year and came into force on 1 January 2010.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

This essay is called In the head of Garibaldi ? a study about the portrayal of Garibaldi in biographies and focuses on the literary portrayal of Garibaldi in biographies published in the early 20th century and the early 21st century. The purpose of the essay is to describe the possible changes in the way of portraying Garibaldi in biographies and compare the portraying to the portrayal of Garibaldi that Garibaldi himself gives in the American translation of his memoirs, which were published in New York 1859.I have in this study used a constructivist approach with focus on the attributes, ideals and roles of Garibaldi. Research and thoughts from a wide field of science has been used, for example the works on nationalism by Elie Kedourie and Ernest Gellner. The thoughts on biographies as a scientific genre as described in the anthologies Att skriva människan (Ambjörnsson, Ringby & Åkerman red.) and Med livet som insats (Rosengren & Östling red.) has also been of the utmost importance of the study.The results of the study shows that there has been changes in the way of portraying Garibaldi in biographies, as showed in the more unbiased portrayals in the newer biographies.

This thesis, drawing from several empirical investigations, reaches the conclusion that there seems to be a positive correlation between the level of democracy and the level of state capacity in Latin American countries. This correlation is explained by a hypothesis derived from Rational Choice theory. With some important caveats, this conclusion is then applied to the discussion about democracy as a form of government. Within democracy, the thesis also offers an insight into different electoral systems and its possible implications, mostly on a theoretical level. The thesis only exists in swedish as of yet..

Idag arbetar avdelningen för extern produktion vid BAE Systems Hägglunds med produktions stödjande uppgifter för leverantörer av Build-to-Print komponenter. En allt större del av BAE Systems produkter konstrueras av BAE Systems konstruktörer medan tillverkning genomförs av leverantörer. Denna förändring har skapat ett behov för BAE Systems att kunna stödja leverantörer i produktionsprocessen för att förhindra att kvalitetproblem uppstår. Den produktionsstödjande uppgiften blir också viktig då det finns en vilja på BAE Systems att kunna genomföra kvalitetssäkring hos leverantörer innan ankomst. Dagens arbetsprocess för produktionsstöd har vuxit efter olika leverantörers tillfälliga behov vilket har gjort att inget standardiserat arbets- eller kommunikationssätt finns.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim of the study was to describe how nurses experience to handle the alcohol issues among young people and how they can identify young people?s alcohol problems, abuse and dependence. Empirical articles were searched in the databases Cinahl, Medline(Pubmed) and Discovery and resulted in the inclusion of 14 scientific articles. The results showed that nurses find it difficult to raise the issues of alcohol with young people, this partly because they feel that they have too little knowledge and that it is an emotional issue to raise. There is help instruments available that nursing staff can use to raise this issues and to identify alcohol problems, abuse and dependence.

The main focus of this master?s thesis concerns the relation between subject representation, power and gender. Classification systems and subject heading lists are products of their cultural and social context and some subjects and disciplines are given a greater value than others. Our aim in this thesis is twofold; to discuss and critically analyse the prevailing gender norms that are expressed trough classification systems and subject heading lists and to examine how they manage to represent gender studies as a multidisciplinary subject in theory as well as in practice. We are also discussing the particular problems with the representation of multidisciplinary subjects in general.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

AbstractThe purpose with this study is to find out how pedagogues, who teach in the early years of primary school, motivate and stimulate all pupils so they want to read a lot of fiction. The research also includes finding out more about why the pedagogues work as they do. The research starts with a study of current literature which deals with how teachers should work with motivation and stimulation in school. To find out how the pedagogues work in school I have made qualitative interviews with four pedagogues who work in the early years of primary school. The result shows that all of the pedagogues motivate and stimulate pupils in similar ways.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.