The purpose of this thesis is to create opportunities for an efficient interchange of information between humans and technology, especially for the skilled user, and put the designprincipal for informative structures and features into practice. Informative structures and features in a large number of information items helps the peripheral visual system to automatically capture knowledge through logical patterns.A field experiment was done to evaluate if informative structures and features, implicate efficient human information-processing, even in a small study. The results was ambiguous because the quantitative part of the investigation didn?t show any significant differences, whereas the qualitative showed that people prefer a dynamic document with a high degree of informative structures and features over a dynamic document with a low degree of informative structures and features. Even if this study was inconsistent, probably because to few subjects where used, the implication of the research that?s behind it is solid.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

Buller påverkar människor på många olika sätt, både fysiskt och psykiskt. Hörselskador, tinnitus, sömnproblem och koncentrationssvårigheter är några av effekterna av bullerstörning. Intensivvårdsavdelningen är en arbetsplats som är dokumenterat bullrig. Sjuksköterskor på intensivvårdsavdelning utsätts i sitt dagliga arbete för en hög bullernivå. Det är en apparattät och tekniskt avancerad miljö.

Cannibalism can have major influence on fish population dynamics. A prerequisite for cannibalism is that the cannibal and the potential victim meet, and besides density effects, the encounter rate between cannibals and their victims is therefore also largely dependent on habitat use and habitat heterogeneity. In this study I quantified and compared the potential for cannibalism in stream-dwelling European grayling populations in three rivers in Jämtland by means of habitat classifications. I also analyzed population dynamic consequences of varying the potential for cannibalism in terms of intensity, using a physiological structured population model. Findings based on habitat characteristics were that the potential for cannibalism is in general not favourable in these types of streams.

Denna studie ska påvisa den problematik som ett fartygsbefäl kan känna och uppleva när ett larm signalerar på en fartygsbrygga. Syftet är att beskriva problemen samt ta vara på befälens egna erfarenheter utav larmpaneler ombord på fartygens bryggor, samt vad man skulle kunna göra för att minimera problemen. Vi har valt i denna studie att göra en kvalitativ undersökning med hjälp av enkäter samt intervjuer. På detta sätt kan vi fånga upp fartygsbefälens egna erfarenheter och de känslor som de beskriver. Resultatet har visat sig att det finns problem med lokaliseringen av larm för de oerfarna samt att de dessutom kan tappa sin uppmärksamhet med navigationen av det egna fartyget.

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

Enligt Standish Group är det endast cirka 35 % av alla systemutvecklingsprojekt som avslutas på ett lyckat sätt när det gäller tid, budget och resurser. Inom systemutveckling är fastprisprojekt, där systemets kostnad är förbestämd, allt mer populärt. Dynamic Systems Development Method (DSDM) är en modell för utveckling som fokuserar på fasta resurser och tid med funktionalitet som den flexibla variabeln. Syftet med den här uppsatsen är att se om man kan driva fastprisprojekt med en modell som DSDM på ett sätt som gör det till en bra lösning för både beställare och leverantör.Min slutsats är att det största problemet med DSDM är att få beställaren att godkänna den som projektmodell. Ett annat stort problem är att många projekt med DSDM blir stressiga eftersom tiden är fast.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.

Många barn har svårt att tillägna sig ett korrekt uttal och de kan uppvisa olika typer av uttalssvårigheter. Termen verbal dyspraxi används då uttalssvårigheterna är neurologiskt orsakade och den motoriska planeringen och/eller programmeringen av talets rörelsesekvenser är nedsatt. I tidigare forskning har behandlingsmetoden Dynamic Temporal and Tactile Cueing (DTTC) lett till förbättring av uttalet hos barn i 5-8 års ålder med verbal dyspraxi på stimuli (ord/meningar) som de har tränat på. Huvudsyftet i följande studie var att undersöka huruvida behandlingen har effekt på uttalet hos äldre barn med komplexa uttalssvårigheter inklusive verbal dyspraxi då behandlingen genomförs 20- 30 minuter, 3 dagar i veckan i 4 veckor. Åtta skolbarn (8-13 år) med nämnda svårigheter samt eventuell komorbiditet ingick i studien.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.