Purpose: This study aims to investigate the conditions that prevail when companies put their marketing in social media with the purpose of creating a perception of the risks and opportunities it brings to businesses and ultimately how it may affect the corporate image and identity.Theories: The basis of the problem area are presented through a theoretical framework with the purpose of highlighting the notions of social media, communi- cation, marketing communication, groundswell, corporate identity and image.Methodology: To investigate the research questions this study adopted a qualitative approach in which the authors study the properties of a phenomenon in order to seek a deeper understanding of the problems we have presented. There is an exploratory approach to knowledge and the authors have chosen to conduct qualitative research interviews based upon three themes: Driving Forces, challenges and impacts.Conclusion: The study revealed that traditional models of communication are no longer applicable in social media. Companies are up for a challenge and must clarify their sole purpose when establishing communication in the social landscape. The general motivation for marketing in social media is making profit, however, building relationships is not a natural motive for most companies. The risks companies expe- rience is the exposure caused by social media and the study also reveals that this fear is firmly attached to their lack of knowledge of these new channels of communicat- ion and their primary areas of use which indicates that skilled employees plays a vi- tal role with their use of social media in their communication process.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This report is written in the purpose to investigate the mechanical forces and characteristics related to a propeller driven aircraft in the Earth?s atmosphere. It?s written as a thesis project during the spring semester of 2014 and graded accordingly.Thanks Arne Karlsson for fruitful discussions. Also thanks to Simon Leijonmarck for help with useful discussions concerning structural batteries..

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

As a consequence of increasing wind power installations in the Nordic grid the last years, the need for regulating power has become larger. In the Nordic grid, regulating power is mainly provided by hydro power. One part of the regulating power is called frequency control, which ensures that the grid frequency is stable and close to 50 Hz.However, setting the turbine into frequency controlled operation may cause stress and wear of the components in the mechanical control system. Frequency controlling implies large and frequent servo forces and longer travelling distance of the sliding bearings in the Kaplan turbine.Based on one selected Kaplan turbine, Selsfors G1, measurements and MATLAB calculations have been performed in order to determine forces and movements of the linkage system. With these forces and movements as input, stresses and fatigue have been determined as well as sliding distances, bearing pressures and wear of bearings during a typical lifetime of 40 years.The results indicate that no severe wear exists on the bearings during 40 years of service.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

ABSTRACT Titel: Branson - Jobs; Entreprenör och/eller Ledare?Nivå: C-uppsats i ämnet företagsekonomiFörfattare: Madeleine Nordin och Runa ClaessonHandledare: Lars EkstrandDatum: Maj 2012Syfte: Syftet är att belysa relationen, och studera sambandet, mellan rollerna entreprenör - ledare. Vad förenar dem, och vad skiljer dem åt? Finns det något motsatsförhållande mellan dessa båda roller?Metod: Studien är en kvalitativ studie där ansatsen är en kombination av induktiv och deduktiv ansats, så kallad abduktion. Information och material till vår studie har vi fått genom en intervju och i övrigt olika typer av sekundärinformation.Resultat & slutsats: Tidigare forskning talar om det komplexa i skärningspunkten mellan rollerna entreprenör och ledare.

I och med ett ökat intresse för entreprenörskap samt den allt svårare situationen på arbetsmarknaden för invandrare väcktes under 1990-talet ett stort intresse i Sverige för invandrarföretagande. Företag som drivs av personer med utländsk härkomst har blivit en allt vanligare del av marknaden. Denna grupp av företagare har kommit att bidra med nya affärsidéer samt ny kompetens på marknaden.Det framkommer i flera utredningar och rapporter att många invandrare finner det svårt att få fäste på den svenska marknaden på grund av bland annat språkliga brister och begränsade kunskaper inom det regelverk som styr företagandet i Sverige. Vår studie fokuserar på att undersöka invandrarföretagares position på den svenska marknaden. Syftet har även varit att ta reda på drivkrafterna bakom valet att starta eget samt vilka tillväxtstrategier invandrarföretagen använder sig av.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

Syftet med uppsatsen är att beskriva och analysera välkända strategimodellers applikationsförmåga för de specifika förutsättningar som tjänsteföretag inom storhushåll verkar inom. Metoden som vi valt är kvalitativ och materialet som används tar sin utgångspunkt i sekundärdata i form av offentliga och institutionella källor från kända strategiforskare och branschspecialister. Uppsatsen utgår teorimässigt från de tre strategiska analysmodellerna, Five Forces, SWOT och VRIO-modellen. Dessa analyseras i förhållande till den inriktning av storhushållsföretag som vi valt. Vi har i analys och slutsatser visat på vissa svagheter hos Five Forces-modellen, SWOT-modellen och VRIO-modellen när det gäller dessa modellers respektive applikationsförmåga på tjänsteföretag inom storhushåll.

Industries with energy costs as a large proportion of their total costs are greatly affected by the instruments deployed to cope with the Swedish climate and energy policy goals. With energy costs representing more than 30 % of the total costs, tomato cultivators are one of the affected industries. In order to remain competitive with other countries, a more resource- and cost-efficient cultivation of tomatoes in greenhouses is desirable in Sweden. Based on the concept of industrial symbiosis, this study investigates the prerequisites for a resource-efficient production of locally grown tomatoes in Sweden through the utilization of low grade industrial waste heat. The study is based on the foundry industry as the supplier of waste heat.To investigate the environmental, technical and economic potential of the exchange of waste heat, a comparative life cycle assessment, an inventory of the supply of industrial waste heat in Sweden, a compilation of potential technologies for the recovery of low grade industrial waste heat for heating greenhouses and a comparative life-cycle cost calculation were carried out.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

The Swedish armed forces has for many years educated squad leaders by letting them start their training two and a half months before the soldiers start their training. 2007, this system was used for the last time. I went trough this system myself in 2005 and had a positive experience and when I did my internship I experienced a slight difference in the attitude of the squad leader. I talked with my colleges at the company and they had felt the same. This essay will try to analyse if the squad leaders has lost any of there ability and if so, what could be the cause? To analyze the ability of the squad leader in this essay it will first analyze their ability through the Direct leadership theory, which is the theory that is presently used in the Swedish armed forces.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.