Generative artificial intelligence (AI) has rapidly gained traction in the education sector, with tools such as ChatGPT often highlighted as potential support in teachers? daily work. At the same time, the technology raises important questions about how its use should be organized and what responsibilities school leaders hold. The aim of this study is to deepen the understanding of how generative AI is implemented in school organizations, focusing on the strategic work of school leaders and how this is experienced by teachers. The study is based on a qualitative study, comprising interviews with 14 school leaders and teachers in a county in western Sweden.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Alcohol consumption after training and its effects on muscle gain and recovery adult menAuthor: Frida Carlstedt, Puck JanssonSupervisor: Frode SlindeExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 09, 2014Background: Today, the Swedish population exceeds the recommendations for alcohol intake while advised to move at least thirty minutes a day. It is well established what happens if you drink alcohol before a workout or if you workout the day after an alcohol intake, but it is less well established how muscle gain and recovery are affected by an intake of alcohol in the phase of recovery.Objective: The objective of this review is to investigate if there is a relation between alcohol intake after a workout and effected recovery and muscle gain. This was performed by measuring the outcomes cortisol, testosterone, creatine kinase as well as different measures of muscle strength. The issue was ?Does an intake of alcohol after training affect recovery and muscle gain??Search strategy: A systematic review in the databases PubMed and Scopus with the MeSH-terms: exercise, muscles, recovery of function, training, athletic performance, performance, sport, alcohol drinking, alcohols, alcohol and ethanol.Selection criteria: Criteria for articles to be included in this review were that they would be RCT- and human studies in healthy subjects as well as containing an ethanol intake after a physical activity that consisted of weight training in the form of resistance training or other forms of activity that promotes strength.Data collection and analysis: A systematic search for literature as mentioned above (search strategy) was performed as well as an analysis with the SBU quality review template for randomized studies, and a quality review for each measure of outcome according to Gothenburg University summarized evidence template for measures of outcome.4Main results: Many studies are authored by the same group of researchers and/or are of a lower quality.

In Sweden, there an increasing need for transport and this leads directly to fuel demand of the transport sector is expected to increase. Both politicians and industry believes that renewable fuels are a realistic and significant method to reduce the transport sector's environmental impact. This study aims to document the Swedish haulage contractor?s attitude to biodiesel. Also to document the strengths and weaknesses of biodiesel, based on opinions from the ultimate consumers.

The Government announced a new school reform which aims to support teacher appraisal and professionalism within the Swedish education system. The once well renowned profession is hurting by the decreasing quality of the Swedish education system and the declining number of applicants to the university teacher program. The school reform introduced a new career path for especially skilled teachers to an occupation earlier characterized by a homogenous work force. The Government encourages principals to promote thriving teachers to first teachers, whom will receive an increase in the salary covered by state aid. By supporting these effective teachers, the Government wishes to increase the image perceived and status of the profession and improve the competitiveness of teaching's salary.

The construction of an identity among lesbian women during 1950-­?1965 is in focus in this master ?s thesis. My starting point is that identity, such as lesbian or any other identity, is formed in relation to other people and groups, as well as society. This thesis will also examine how lesbian women met and formed bonds with like-­minded, and whether these aspects changed, during the defined time period. The empirics is made up by letters written by women to Riksfo?rbundet fo?r sexuellt likabera?ttigande (a Swedish organisation for lesbian and gays) as well as an interview with two lesbian women who were born in 1938 and 1940.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Want to help making the world a better place? Do it with HypOCycle!HypOCycle is a bachelor thesis that started in September 2007. The project is owned byLars-Johan Hjertz and Erik Westerlund.HypOCycle is probably the only bike in the world that has a linear pedal movement. Themovement comes from a new engine technique that hasn?t even been brought to themarket yet.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

Companies learn through their employees. In this paper I make research into how knowledge transfer and learning occur at Metso Paper Karlstad AB, which is a partly project based organization.The result is that there are many factors that affect the knowledge transfer in a company. Knowledge transfer occurs mainly between individuals within the company, but also between departments and other actors outside the company. In the gaps between these actors, there is a risk that knowledge is not transferred, which is an obstacle to learning. A great deal of the knowledge transfer and the learning is carried out through individual?s own drive and motivation.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.