This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

The purpose with this study is to compare different systems of grain storage from a financial point of view. Grain that is supposed to be fed to laying hens. The systems that were compared were different airtight storage of grain and a system of conventional storage. To make this case study I choose to compare four different systems. In the case study there was one system with bin drying of the grain, two systems with airtight storage of the grain and one system where you buy dried grain during the season. I made several of capital investment appraisal where I found the cost of each system, then I took the cost and divided it with the total grain use and calculated the cost for each kilogram of grain, and also the cost of the feed. Then I compared the cost from my case study with the cost of buying feed. All the systems except for one, gave a lower cost for the hen feed than buying feed from a dealer The best system, witch were bin drying lower the cost with about 80 000:- SEK.

Abstract The purpose of this degree project is to examine what impact working with physical objects has on children?s learning process concerning addition. We want to explore what addition strategies can be exercised using the game ?Twice as much?. We have observed children in school year 1.

Many species of amphibians are threatened both in Sweden and globally. The causes are many and a main factor is habitat alterations which often results in populations being isolated. Changes in the agricultural landscape have among other things resulted in small water bodies being filled and dried out and that has severely affected the Swedish amphibians. Swedish amphibians are depended upon small water bodies for their reproduction. Wetlands have been constructed to reduce the impacts of the eutrophication in the Laholm bay.

Baled silage has become one of the most important conservation methods in Sweden. Because we take our grass as silage we get the quality and the good hygenic that we would like to have. Silage has become a big buisiness also in the horse feeding where many of the breeders have changed from the hay to the hay-silage. The difference between regular silage and haysilage is that the hay silage is dryer (60-70%DM). The hay-silage has also put higher demands on machinery and wrapping material since the grass gets sharper and harder to press together real hard. The main reason for the test was to compare two different systems for wrapping, the new Cross Pac and conventional.

Wastewater treatment is increasingly controlled by the Swedish environmental quality objectives, adopted by the Swedish parliament. There is a need for a sewage system that can fulfill stringent requirements concerning the environment, recycling and resource use and hygiene. Additional environmental aspects in recent years are the impact of climate change, new knowledge about the effects of pharmaceuticals in water, the need for improved wastewater treatment and increased recycling of nutrients to agriculture. This report has, from a future scenario of the year 2050, analyzed seven different systems for wastewater treatment and treatment of compostable biowaste from households in Eskilstuna. A future scenario was chosen based on that within a forty year period new challenges may arise which can result in higher demands on sewage treatment than those we see today. Another reason why the future scenario was established is that changes in wastewater treatment systems are slow to establish. The analysis is mainly focused on the economical aspects but environmental aspects such as emissions to receiving waters and potential recycling of plant nutrients has also been evaluated briefly.

Toxic metals contaminate soil worldwide and thus serve as sever environmental threat. Therefore the purposes of this study were to investigate in which soil fractions that different heavy metals (Fe, As, Cu, Zn and Pb) could be found in contaminated soils and if it is possible to use sieving as a method for decontamination. Soil samples were collected from three different locations, the Nasa silver mine, the Blaiken-mine and Svalget environmental station. The samples were oven dried and later on sieved into six different fractions 8mm, 4 mm, 0.5 mm, 0.250mm, 0.063 mm and <0.063 mm. The fractions 4 mm, 0.5 mm and <0.063 mm from each location were analyzed in an x-ray fluorescence detector.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

The aim of this study was to examine the current and historic mercury(Hg) load of the lake Storjuktan due to its recent exposure to a local potential source of Hg in form of the Sulphide mine Blaikengruvan(2006) and an earlier potential sources of Hg-load, the damming of the lake(1960s). Sediments were extracted using a HTH-sampler, freeze-dried, and analyzed for tot-Hg, LOI and activity of 210Pb and compared to samples extracted prior to the opening of the mine(2006). Constant initial concentration (CIC)-dating model was used for dating the samples. Low levels of Hg (100ng/g) were found throughout the lakes sediment. The highest levels of Hg(220ng/g) was detected at a depth of 4-5cm dating back to the mid 1970:s, suggesting that increased levels of atmospheric Hg rather than damming of the lake has caused the increase of Hg.

Soybean meal from South America is the most common protein feed used for animal production in Sweden. Production of soybean has negative effects on the environment and the transports from South America to Sweden causes considerable CO2 emissions. Therefore it is a growing interest in locally produced protein feed in Sweden. Protein feeds that are possible to grow in Sweden are rapeseed, peas, faba beans and lupins. Those are adapted to the Nordic climate and are perfect to grow in cereal rotations.

Important issues for the local authorities are what to do with the sludge produced insewagetreatment plants. The tax for landfill leads to higher costs with 250 SEK/ton. On the 31December 2004 it will be forbidden to landfill sludge.In Sweden the yearly production of sludge is 240 000 tons, counted as DS. The phosphorouscontent is 3 % in sludge. The total yearly production of sludge gives 6000 tons of phosphorous.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Being an architect I create spaces with roof, walls and fl oor. The availability of the essential materials to create such spaces is practically unlimited. The materials also play a significant part to the character of the created space. I hope to contribute to the general understanding of materials as elements in the design of urban spaces by having intensely explored one specific material in depth, pointing out its bad and good qualities. I am of the opinion that the reason for choosing a material shouldn?t be because of a shortage of knowledge, facts or references, but what character you want for the room. When travelling across Europe, it sometimes feels like clay paving is everywhere, but back in Sweden it is almost unseen of in modern landscape architecture.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.