This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, Drawings, orders and decision support documents were supplied by the company.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

The following report comprises my bachelor´s thesis in Industrial design, 30 hp. It is executed in collaboration with Bonum senior housing, who has been the client and assignment- maker of this project.The goal was to design a bench for their entrances, which could represent not only the needs of the target group but also Bonum as a trademark. The work is done with great care for both human kind and the environment, with sustainability as beacon.The design process has been followed.Initially, you will find the definition of a bench for entrances, the framework including inclusive as well as sustainable design, a function- and market analysis followed by the inspiration part of the project. Getting to know the target group and their specific needs has been essential for this work.Investigations about what senior house living and senior products are and what the target group thinks and feels, has been done. As a result, two ?personas? has been developed.With the help of a purposely chosen group of people, surveys and ergonomic studies has been executed, as well as prototype-testing.The fact-finding has formed the stable and unavoidable foundation of this project, which later on gets more creative and idea based.

In a society where adults set the conditions for children?s play and generate modern and at times technically advanced products, fundamental characteristics like simplicity, opportunities for motor skills training and learning tend to be neglected. Owing to this, the Linköping-based company Time In wants to introduce a new multifunctional product, which differs from other products in shape and function and lives up to the often overlooked, basic characteristics in a toy.With Time In as the assigner, the purpose of this master thesis has been to use simple means to produce a "learning by playing" concept. Since Time In sells toys and products suitable for children in nurseries and preschools, the development of the products has therefore included a study of nursery and preschool environments.The thesis has been carried out within the Product Design subject area at the Department of Management and Engineering at Linköping University. Concept development has been done in three phases: the Preparation phase, the Design phase and the Presentation phase.

The main aim of this research is to survey the general colour scheme for private dwellings inVisby, built 1860?1930. During this period the visual appearance of the town of Visby changedsubstantially, since the increased local production of lime led to the plastering of many woodenbuildings. Which colour schemes were chosen for the different building types of the historic centreof Visby, and which colours came to dominate the time period? The methods used for answeringthese questions have partly been field studies on site and sampling of selected buildings, andpartly critical reading and observation of iconographic material (paintings, Drawings, aquarelles,postcards and photographs).

Denna studie syftar till att se på hur barn tar sig an konstruktionsritningar i jämförelse med fritt byggande i en lekfull gruppmiljö. Tidigare forskning visar skillnad mellan mängden män och kvinnor i tekniska yrken och även män och kvinnors inställning till de tekniska ämnena. Vissa forskare visar också på åldersskillnader mellan hur barn lär sig tekniska ämnen. Tar fyra- och femåringar frivilligt sig an konstruktionsritningar, följer dem och färdigställer de konstruktionen? Studien har särskilt tittat på om det fanns skillnader mellan flickorna och pojkarna när de byggde? Hur påverkar barnens eget intresse hur de bygger? Om barn, fyra och fem år gamla kan följa bygginstruktioner?Resultatet av denna studie, i viss mån, stödjer tidigare forskning om att det finns en genus aspekt redan i förskoleåldern, pojkarna var mer försekomna och hade lättare för att följa lego instruktioner än flickorna, men frågan kvarstår; varför finns denna skillnad? Förutom genusaspekten fanns det också ett tydligt resultat som visade på skillnad i byggkunskap mellan fyraåringar och femåringar.

In my paper I have compared popular science and neutral science regarding language and construction. My task was to find out if there are differences between the language of popular science and that of scientific science. The purpose of my paper is to answer four questions1.How do the authors present the bogbodies and the mummies in the two categories?2.What does the popular science imagine that you want to read about?3.Is there a difference between the target groups of the two categories?4. Does the presentation of the subject have consequenses when it comes to contents and readers?I have studied how often the authors use Drawings, photos, diagrams, maps, and if the titles of the chapters can tell you something about the nature of books.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of Drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the Drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Hidden away in the pristine landscape on the northeast shore of the Dominican Republic, the remote village of Miches is on the verge of shifting its economic resource base from traditional fishing into what could become an international model for sustainable tourism. The aim of this thesis was to produce a vision of a waterfront park near the center of the village; demonstrating concept-based landscape design that reflects the goals of sustainable development originating from the local incentive structure. A composite landscape analysis and design concept both served to inform and guide the design work, which was executed through model building, hand Drawings, and production of a visual presentation in the format of an architectural competition entry. The design concept, All invited, signifies the distinction between the development that is about to take place in Miches and the otherwise common all-inclusive resorts, where tourists are set apart from the local community and spend most of their time within the fenced-off premises of the hotel. All invited also captures the typical Dominican hospitality, and mirrors the aspirations of turning Miches into a safe and welcoming place for visitors. The result is a public park design that is equally inviting local residents as it is to tourists, and where the unique qualities of the site are emphasized without being exploited.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withDrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

Partille municipality is planning an extension of the building Forellen. Green environments in health care have been shown to improve the health of patients, especially in elderly care. This report addresses the possibility of using the leftover space in close connection to a dementia and short-term accommodation to a winter garden and a terrace. The report also analyzes the impact of these green spaces on the residents.The purpose is to find alternative answers on the issue through the study of nursing homes and green spaces, and that these may be useful for Partille municipality and inspiration for future projects. The goal is to get conclusions in to a report, Drawings, and an oral presentation.The results show that the design of environments can affect human well-being and also be healing both mentally and physically.