In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

This thesis was conducted at SverigeGrepen in Vänge-Körlinge, Uppsala, Sweden.SverigeGrepen is a family business that develops and manufactures a few different parts of different kinds of products. My task is to come up with a good idea that facilitates the coupling of trailers, i.e. from an idea to a fully functioning prototype. The product is intended for use by all customers for all kinds of trailers. The actual goal of the work is to develop a full prototype that you can install and use in the easiest way possible, a prototype that follows the specifications.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

This work has treated the subject of gender, with demarcation against the norms regarding appearance and beauty, conveyed by the media and how it affects society. This is expressed through social satire cartoons. This work has also led to an exploration of the importance of a personal drawing style and how it manifests itself..

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

The aim with this thesis was to acquire an understanding for how individuals handle the feeling of shame in connection with cultural consumption. In order to capture the feeling of shame we developed an interview method called the Backstabber interview technique. We found that the Backstabber interview technique successfully triggered feelings of shame in connection to cultural consumption, which made it possible for us to study the handling of shame. We found that our respondents tended to use different forms of accounts in order to handle the feeling of shame. We categorized them into five accounts with relating sub-accounts.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Landskapsvårdens hantverk, 15 hp 2011.

In the pilot plant at Hammarby Sjöstad, Sjöstadsverket, several new methods are tested in order to achieve a good use of resources. When a new technique is considered it is often the performance of the technique itself, under given conditions, that is evaluated. However, in order to evaluate the overall function the whole picture is needed. With a system analysis it becomes possible to make a comparison where all the positive aspects are put up against the negative ones, for the technique itself as well as its requirements. In this way the influence that minor components have on an entire system can be considered.This report presents a system analysis of an anaerobic membrane reactor (MBR) with a VSEP-membrane (Vibratory Shear Enhanced Process).

The ammonia emissions are an environmental issue since they contribute to eutrophication. By far the largest source of ammonia emissions is manure from agriculture and should therefore be reduced. Loss of ammonia is not only negative for the environment but also to the farmer who loses nitrogen that could have been used by the crop. The focus of this study has been emissions from spreading slurry where the loss can vary widely depending on slurry-, soil-, and weather conditions. There are mainly two different ways to reduce the emissions. One is to inject or mix the slurry into the ground to avoid air contact. The other way is to use acid to reduce the pH in the slurry to a level between 5 and 6 where the equilibrium is so strongly pushed to NH4+ that hardly any NH3 can be lost.

Aim: The aim was to investigate the ambulance nurses experiences during a specific ambulance missions that led to usage of LUCAS ?.Method: Participating ambulance nurses were randomly assigned from a total sample group of 12 women and 39 men. Five women and five men participated. Qualitative interviews were conducted, where the Critical Incident Technique approach was used. Collected interviews were valued using qualitative content analysis.Result: Interview texts were divided into three domains, 10 subcategories could be identified which were sorted into three categories.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

The initiative for this project was taken by Benteler Engineering Services, as a result of having identified areas of improvement, in designated accessible areas like the wheelchair spot onboard buses. Depending on a wheelchair to be able to move around can understandably be challenging.Public transport is a common good in today`s society, however despite the measures taken towards adjusting to accessible needs, the majority of those being disabled chose different alternatives of transportation. This is due to reasons such as the drivers' poor attitude, furthermore the limitations of the space allocated to accessible needs, as people with strollers also use these spots onboard. Also, some wheelchair users find the rides unsafe, as they could easily fall over during without the appropriate space for them onboard the buses etc. These are only a few reasons why other options are sought out, i.e.

The aim of my examination work was to compare and research how russian respective swedish teachers make use of educational aesthetic methods such as drawing, drama, music and dance in the teaching of core school subjects ? mathematics and swedish respective russian languages. The aim of this work was to find out which of these methods are used by pedagogues in the process of education and on what level are they integrated into the theoretical pedagogic work. The point was to also analyse the regulation documents used as pedagogical base in schools i've been doing my survey in. This was done to partly find out what arts perspective is given in the curriculum and partly to see what pieces of it are reflected in the process of education.

The Stradella system on an accordeon is a complicated construction. It has readymade con-nected chords, these are major, minor, seventh and diminished seventh. To reach other vari-ants of chords you have to combine chord/bass buttons. Which advantages and disadvantages do the use of combined chords/bass buttons mean? How is the pedagogic work affected by using the combined chords/bass buttons? I have interviewed four musicians/teachers to learn about this technique.