Sök:

Sökresultat:

1963 Uppsatser om Drain water heat recovery - Sida 8 av 131

Utvärdering av magnetiska alternativ till optisk scanning

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Utredning av solenergi för drivning av sorptiv kylprocess för inomhusluften på Stockholmsarenan

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

Varför, varför inte? : En studie om två skolors syn på läs- och skrivprogrammet Reading Recovery

Syftet med studien är att undersöka, beskriva och problematisera Reading Recovery samt att ta reda på varför två nyzeeländska skolor har valt att behålla respektive sluta med programmet. Undersökningen baseras på fyra kvalitativa intervjuer samt en kvalitativ observation, vilka skedde på två skolor där den ena slutade med Reading Recovery för några år sedan och där den andra skolan fortfarande använder programmet. Undersökningen syftar inte till att jämföra de båda skolornas språkundervisning, utan till att ge en bild av hur det kan fungera på en nyzeeländsk skola. Intervjuerna ägde rum på Nya Zeeland och de intervjuade hade olika anknytning till Reading Recovery. I uppsatsens bakgrundsdel beskrivs den tidigare forskningen om uppsatsens tre grundteman, det nyzeeländska skolsystemet, språkpedagogik samt stödundervisning.

Värmesystemsutveckling

In cooperate with Asko Cylinda we have developed a new heat system too short the process time and reduce the energy consume in a dishwasher and still have it too be a class AAA. The environment and quality is important for the company too still be the number one on the market, If they want too keep that position the product developed of new innovations will be very important. The systems we have developed are more effective and reduce energy up too 25 %. The process time is reduced too less than two hours, from the today two and half-hour. The solutions are too heat up the rinse water and the dishwater at the same time, with a new heating system and it make are solutions unique and effective. Its good for the dish and the environment.

Underlag för BREEAM-certifiering : Kristianstad Nya Galleria

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Renovering av flerbostadshus - en studie om energieffektivisering och lönsamhet

In today?s society a large focus is put on energy systems and how our energy systems are built up. In order to make sure that we in the future still can enjoy the living standards that we are used to today, Sweden and EU have made a number of decisions on making our energy system more energy efficient and consequently reduce the usage of energy resources. By 2020 the European Union should have reduced its energy consumption by 20 % compared to 1990?s level, and by 2050, 50%.

Kompaktaggregat till Passivhus i Sverige

Kompaktaggregat är ett integrerat FTX- och FVP-system som används i passivhus. Vi har gjortenergiberäkningar i programmet VIP+ för att se hur kompaktaggregatet skulle kunna fungera ipassivhus i Sverige.De resultat vi har fått fram ur VIP+ visar att passivhus med ett installerat kompaktaggregat klararav att nå passivhuskraven ända upp till Skellefteå. De beräknade värdena understiger kraven förpassivhus, men en viss marginal behövs för att kraven ska nås även efter uppförandet avbyggnaden. Vi har även tolkat tekniska uppgifter på ett sätt som enligt oss har en positiv effektför passivhus på kallare orter. Därför tror vi inte att värdena för de tre nordligaste platserna ärhelt tillförlitliga.

Kan jag inte läsa och skriva drunknar jag: en undersökning i
hur man arbetar med läs- och skrivinlärning på Nya Zeeland
med inriktning på modellen Reading Recovery

Syftet med min praktikresa till en skola på Nya Zeeland var att observera deras undervisningssystem för läs- och skrivinlärning och då framför allt specialmodellen Reading Recovery. Utifrån delar av deras metod skulle jag utforma ett förslag på arbetsmodell, som kunde användas i den svenska skolan för att hjälpa lässvaga elever. Praktiktiden delades mellan klasserna 1-3 bestående av elever mellan 5 och 7 år samt med dagliga lektioner i Reading Recovery. Jag gjorde intervjuer med både elever, lärare och föräldrar med erfarenhet av Reading Recovery. Under mina observationer har jag funnit att den nya zeeländska skolan har en väl utvecklad och fungerande metod för läs och skrivinlärning och utifrån detta har jag utarbetat ett förslag på metoder som jag funnit användbara.

Avvikelser i energiprestanda

Calculated and measured energy in residential buildings is going to differ. The reason to this may be due to many factors. In this study there is a study on how these factors affect the energy use in a building. To get an insight in what defines energy, there is first a description of energy supply both worldwide and used in Sweden, followed by a description of the energy balance. In this study energy will be studied in residential buildings only.

En jämförelse av RDF och avfall som förbränningsbränsle

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Vattenskydd och krisberedskap hos allmän dricksvattenproduktion : Skydd av täkter, tillgång till reservvattentäkter och andra nödvattenlösningar hos svenska vattenproducenter

The objective of this report was to analyse and compare vulnerability and preparation in Swedish municipal drinking water production, in case the commonly used water sources were inoperative. Methods used were a questionnaire and a less extensive study of regulations for water protection areas. The questionnaire was answered by 41 Swedish municipalities. A handful of them were companies co-owned by a few municipalities. Only one out of four municipalities had source protection areas to all their water sources and for many sources the protection was not satisfactory.

Kompaktaggregat till Passivhus i Sverige

Kompaktaggregat är ett integrerat FTX- och FVP-system som används i passivhus. Vi har gjortenergiberäkningar i programmet VIP+ för att se hur kompaktaggregatet skulle kunna fungera ipassivhus i Sverige.De resultat vi har fått fram ur VIP+ visar att passivhus med ett installerat kompaktaggregat klararav att nå passivhuskraven ända upp till Skellefteå. De beräknade värdena understiger kraven förpassivhus, men en viss marginal behövs för att kraven ska nås även efter uppförandet avbyggnaden. Vi har även tolkat tekniska uppgifter på ett sätt som enligt oss har en positiv effektför passivhus på kallare orter. Därför tror vi inte att värdena för de tre nordligaste platserna ärhelt tillförlitliga.

Service recovery : ?To err is human; recover, divine?

Uppsatsen handlar om hur företag hanterar missnöjda kunder, vilket i teorin benämns service recovery. Uppsatsen behandlar ett företag som sedan mindre än ett år tillbaka är en sammanslagning av fyra olika varumärken. Syftet med uppsatsen är att kartlägga hur fallföretaget hanterar missnöjda kunder samt att undersöka möjligheter till förbättringar. Uppsatsen bygger på teorier om service recovery skrivna av Grönroos, Bowen, Hart, Spreng och Best. Avsikten med uppsatsen är att skriva en plan för hur företaget kan förbättra sitt hanterande av missnöjda kunder.

Driftoptimering av torkmaskin : Driftoptimering av torkmaskin 3 vid Billerudkorsnäs Karlsborg AB

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

<- Föregående sida 8 Nästa sida ->