This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

The flow of information in road vehicles intensifies as new techniques develop. Informationsources such as cell phones, navigation equipment and radios demand the driver?s attentionwhile he or she must stay focused on the road to perform a safe driving. Today the visualinformation inside the vehicle is mostly located on the dashboard, which forces the driver tolook down when shifting attention between the environment outside and the informationinside the vehicle. One way to avoid this is to useHead-up Display (HUD), a technique thatprojects information in the visual field of the user.This master thesis has been performed in cooperation with Scania CV AB, a world leadingtruck producer.

We were interested in catalogers as human beings and in their reaction to a changed working situation. In the light of the changes which have been made at the libraries during the nineties, we investigated why the very group catalogers reacted with an intense and engaged open debate at the same time as librarians with special competence didn t seem to react in this way. The open debate about the catalogers changed working conditions was held in Sweden, above all at BIBLIST, which is a forum for library-connected questions. This forum uses an email list made particularly for librarians. The situation of the librarians was, to a small extent, also discussed in publications made for the library line of business.

Regional European Offices with the purpose to represent regions and municipalities in the EU-system have had a substantial expansion over the last years. One example is the North Sweden European Office for the counties of Norrbotten and Västerbotten, consisting of seven different headmen who are representing both the private sector as well as the public system. This diverse leadership representation makes North Sweden a very good example on a so called Quango, organisations that stand under simultaneous influence from both public and private sectors. These Quangos opens up new possibilities to solve public problems, but they also bring together two different working models which is not always easy to handle for a Quango. According to earlier surveys some characteristic Quango problems within North Sweden exist, for example the ability to prioritize and thereby be as effective as possible.

This essay provides an attempt to reflect the notions of violence, right or law and fate in Benjamin?s Zur Kritik der Gewalt, in order to clarify his very dense historical-philosophical reflection on the constitutive relation between violence and law. In contrast to what is most often the case, this essay will not address the notion of divine violence in a direct sense, but mainly focus on Benjamin?s discussion on right and law. The complex of his historical reflection, his attempt to articulate what he calls the ?historical function? not only of violence, but also of law, is crucially related to the notion of fate.

During the past 30 years the fuels for energy production in heating and power plants have changed. Fossil fuels have decreased in usage whereas bio fuels in Sweden have increased with 60% since the 1970's. Different fuels affects combustion and the release of various substances and particles into the flue gas. This is caused by the diverse components and chemical structures of fossil fuels and bio fuels. When the flue gas leave the combustion chamber and enters the path to the chimney particles in the gas are being transported out of the combustion chamber.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

För att bibehålla elnätet stabilt är det viktigt för elproducenterna attkunna möta samhällets behov av elkraft. Detta behov varierar beroendepå tid på dygnet och även av årstid. Att kunna samla energi då behovetär lågt, för att sedan utvinna och distribuera energi då behovet ökar ärdärför viktigt. Vattenkraft är en av de energikällor som är enklast attreglera. Denna energi är dessutom relativt miljövänlig.

This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.