Leaders have many tools in their toolbox when it comes to managing their firms, assuring that they are moving in the right direction. One of these tools is vision. Vision can be a powerful tool for steering a company. But to be able to use it fully, you must also understand how vision is best conveyed to employees and followers. If you understand the vision as a tool, you can fully utilize it.

Background: Mergers have been increasing during the latter part of the 1990s. In the Nordic region many previously national companies have joined their forces to create a new Nordic company. This will lead to many challenges when the companies are integrated.Purpose: The purpose of this thesis is to investigate the integration phase. Our goal is to study the integration of Cloetta Fazer and learn how the company can handle the two types of integration. Procedure: To be able to prove our assumptions, that were made on the basis of literature, we have collected empirical material by interviewing eight managers at Cloetta Fazer.

The purpose of this thesis is to gain a holistic understanding of who are the consumers of fortified health food products; moreover to highlight what are the characteristics of the consumers who are likely to purchase these products. This thesis employed a quantitative strategy with an inductive and a grounded theory approach. The data was collected from a research company. Existing theories in the area of functional food were not possible to find. Considering that the area is new this seems plausible; however, previous studies provided insight for substantive framework.

There is now a trend to move closer to the customer in the form of long-term and lastingrelationships. The market today is characterized by growing competition with new playersconstantly arising. In order to gain competitive advantage with the increasingly challengingmarket, companies require to place the customer in the centre. Being close to the customerand engage in successful efforts to create customer loyalty has become a critical successfactor in many businesses. Especially when the customers in today's market is becomingincreasingly unfaithful and continuously looking for new companies with new productofferings.Many companies have now also realized the importance of trying to retain existing customersas it is more profitable than constantly trying to acquire new ones.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

A large proportion of businesses around the world is today ISO 9001 certified and is consequently conducting internal audits on a regular basis. It has however not been possible to conclude that internal audits always add value to the organisation, despite the large utilisation of this tool. Some authors, e.g. Alic & Rusjan (2010) and Wealleans (2000), mean that there are possibilities that internal audits may be used as a value-adding improvement tool. This has led to the emergence of this master?s thesis.The purpose of the case study was therefore formulated to examine how internal quality audits can be made more effective and used as an improvement tool.

This report describes the development of a well?functioning and aesthetically appealing web portal and associated database for a company called Svensk Kredit & Försäkringsförmedling AB (Translated: Swedish Credit & Insurance intermediation AB). The portal will test customers' creditworthiness through another company called Business Check in Sweden AB.Administrators to the web portal have a special user interface to display all customers, to disburse the money to the customer and edit customer information. A super?user interface is available for administrators where they can change the information on all administrator accounts.Many aspects of security has been addressed because the web portal will handle personal information.

When a company seeks to enter a new market, the multiple choices of possible new business relationships exist. Further, establishing new relationships is a time-consuming procedure associated with high uncertainty and high costs. Hence, if the firm does not succeed in pinpointing the most suitable business partners to collaborate with, the firm may both forfeit other possible good relationships, as well as resources invested. Based on this notion the aim of this thesis is to explore how a manufacturing company can base the selection of future dealership Business-to-Business partners by evaluating indicators of a possible business relationship?s potential to become successful. The choice of focusing on the Business-to-Business relationship between a manufacturer and a dealership company originates from being influenced by the issues facing the Swedish agricultural machinery manufacturer Väderstad-Verken AB, who is putting attention to explore the US market.

The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

This final project is an investigation about the responsibility in rooms where the walls and floors are exposed or partly exposed to irrigation of water, as a bathroom, laundry room and WC. The cost for all water damage is valued for 5 000 000 000 SEK each year. How is this possible with all information about the problem and good materials? Who is responsible? Incites had been made in the subject throw reading reports and participation in courses about how to make a room mention above. Discussions have been made with workers in the trade of making the walls waterproof.The conclusion in the rapport is about who´s responsible for the damages and will pay the cost of the renovation. The responsibility is discussed between the contractor and the insurance company.

It has become more common for organization to operate a lot of projects at the same time. These projects affect each other, either in way of resources or technical. Projects in a multi-project environment depend and affect each other, and in most cases they rival about resources, decision-makings and priority. To lead a project portfolio with several projects is a major challenge. The most common problems that occur are vague objective, unclear working conditions, resource shortage and problems of priority.

Bokakademin i Östergötland AB möter framtiden ? En studie av studenters köpbeteende vad gäller kurslitteratur och ett förslag på marknadsföringsstrategi för Bokakademin (Bokakademin i Östergötland AB meets the future ? A study of students? purchasing behaviour regarding textbooks and a proposal for a marketing strategy for Bokakademin)Authors: Fabian Hamnqvist and Emma SvenssonBachelor?s thesis in business administration Linköping University, Department of Management and Engineering, 2013 Supervisor: Mehran NoghabaiAbstractThis paper examines the competition arising from online textbook retailers met by physical college bookstores. The paper examines the implications of college students' purchasing behaviour when buying textbooks, how a specific corporate clientele is composed and the purchasing habits of these customers to the specific company in question. The company used as a practical example is a bookstore located on a university campus of Linköping University in Sweden. Data have been collected using a paper and pen survey of 200 students from Linköping University as well as conducting interviews with eight students and the Managing Director of the company in question.

The cost of capital for traded companies is basically assessed on information from thefinancial market. Small and non-traded companies are lack of this necessary financialmarket information in order to determine an appropriate equity risk premium and tocompute the cost of capital.In the absence of financial information necessary for an external investor, it is difficult toevaluate a non-traded company with the Capital Asset Pricing model (CAPM), which isbased on the financial market information. It measures only the systematic risk, which isthe contribution of one share to the market risk of a portfolio. It is therefore important tofind models that reflect the small and non-traded companies? real business value and theirunique characteristics.

Social medias impact recent years has been huge and an increasing number of companies have started using the services. The benefits for companies to be available thru social media are many and the costs are low. Social media makes it easier for companies to get in touch with their customers and at the same time they reach out to a lot of people since the number of frequent user?s constantly increase. A major part of the information that is available is seen from a company?s perspective and what benefits they can take advantage of thru social media.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.