To be able to protect themselves from credit risk, the banks must constantly check the performance of  the companies they have lent money to. There are many mathematical models for predicting financial distress. These models use accounting-based ratios, which often are historical and not representative for the present situation. This study describes how the banks do in practice to find signals of insolvency in time and the variables they are observing for doing that.In addition to financial reports which the company sends in to the bank at least once a year, also the relationship between them and information from different information  agencies are of great importance to track  signals of insolvency. Poor profitability is the primary cause of insolvency.

In cooperate with Asko Cylinda we have developed a new heat system too short the process time and reduce the energy consume in a dishwasher and still have it too be a class AAA. The environment and quality is important for the company too still be the number one on the market, If they want too keep that position the product developed of new innovations will be very important. The systems we have developed are more effective and reduce energy up too 25 %. The process time is reduced too less than two hours, from the today two and half-hour. The solutions are too heat up the rinse water and the dishwater at the same time, with a new heating system and it make are solutions unique and effective. Its good for the dish and the environment.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

With today`s business world, it is very important to deliver the right product with right quality and quantity at the right time. By ensuring that the staff are happy and have the opportunity to work in a workplace with good structure, the company will be able to reach these parameters and at the same time maximize the efficiency.The project has been carried out at Stena Stål AB in Värnamo. The company's main task is to cut, store and deliver production steel and tool steel to processing companies in the surrounding region. Stena Stål AB in Värnamo is one of total 21 companies in the company group Stena Stål. Stena Stål is a part of the Stena corporate group which owns a total of eight different company groups that are spread in about 250 different locations in 14 countries.The purpose of this report is to give Stena Stål AB in Värnamo suggestions on how to design a new facility for tool steel.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Purpose: Our purpose is to describe and understand how a project-based, knowledge-intensive firm in the high-technology industry creates and transfers knowledge, seen from two perspectives.Methodology: Our qualitative case study has an explorative approach since earlier studies within our positioning are absent, thus we look at KM abductively. To gain more depth to our study, we mirror our findings from our case company with data collected from three additional organisations.Theoretical perspectives: We see a clear distinction between researchers, either seeing knowledge as an object or a process. Thus, we review theories from both sides, either focusing on the creation or transferring of knowledge. In addition, theories on KM in project organisations areaccounted for.Empirical foundation: The study is based on the empirical foundation which consists of the data received through six interviews with employees at our main case company and, additionally, two interviews at each of our three mirrorcompanies.Conclusion: The study found KM being seen from both perspectives in all four firms. Through this, we found implications for how our case company could proceed in the future..

AbstractThe OMX Nordic Exchange Stockholm requires all large companies to apply the Swedish Code ofCorporate Governance. A revised code will be applied from July 2008. The purpose of this paper is toidentify the accessibility of information on corporate governance and in particular how the compliance,concerning the Swedish Code of Corporate Governance in the perspective of an internet active generalpublic.This paper is a complete census of the companies at the OMX Nordic Exchange Stockholm whocomplies with the code. Each company website has been visited and a comparison between the sectorsat the OMX Exchange Stockholm has been performed.Results: 96% of the companies present the members of the nomination committee. 94% presents thenomination committees proposal of the company board members, though only 33% of the companies inthe Energy sector.

Background: Due to an increasing globalization the competition has increased and this has lead to overcapacity and falling prices on markets today. The subject field logistics has during the last decades been given increasingly significance and has become a way to handle the competition. Theories clearly point outthe importance that a concordance exists between logistics and superior strategy but few, if any, authors give further details about how this adjustment should be made. Purpose: The aim of this thesis is with a case study approach survey if the subject field, which describe the importance that logistical solutions correspond with the superior strategy, is known and implemented in a company. We aim to develop the subject field through our empirical findings.

Background: During the 2000s, there has been an increased interest in studying business management and strategy implementation with customer focus in public organisations. To achieve business goals it is important to continuously work with strategies to meet customerdemands for increased efficiency and service. Purpose: The aim of the essay is to examine how to work on strategy implementation in a municipal real estate company from a management perspective in order to achieve overall goals. Method: The study?s methodology is a case study based on qualitative telephone interviews that were conducted with representatives in managerial positions from various levels of the company.

This paper aims at shedding light on the effects of a broken psychological contract in terms of job satisfaction. In a qualitative field study, the author researches seven newly recruites employees about their expectations when starting their jobs at the rapidly growing, Swedish company Klarna. Using Herzbergs two-factor model of hygiene and motivation factors as well as modern motivation theory, i.e. self-determination theory, the study answers questions as to what makes a candidate choose a company and what factors motivates as well as demotivates the recruit at the job, in the onboarding phase. The result is an attempt to describe what makes a recruitment process successful..

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

The students have been assigned a task from Consid, were they are supposed to develop a web based platform for handling the company?s consult CV:s. The key features of the system are to simplify the administration part at mission procurements towards customers and to match qualified consultants to certain missions.Consid is an international it-consult company and have about 1000 consults working for them. When Consid makes mission procurements towards a customer they have to manually match the best consult against a certain mission, this is both time consuming and complicated.The students started the project with big visions and thoughts about how the work would be performed and how the system would be developed. After the initial meetings and the closer it came to the beginning of programming it became clear that the expectations were too big.

AbstractThis study deals with the tours carried out in the manufacturing sector, at Alfa Laval in Eskilstuna. A large number of visitors, from a variety of backgrounds, go there to see how the manufacturing of separators works. With visitors I refer to the company?s customers, suppliers, students, in- house trainee courses, managers and senior citizens groups.The study examines how these tours can be standardized using spatial design. The result shows the importance of working systematically with visualizing the work as well as the environment for optimizing the visitor's understanding.

Hypertrophic cardiomyopathy (HCM) is the most commonly diagnosed cardiac disease in cats. The phenotype varies from mild focal thickening to severe concentric hypertrophy at the left ventricle. Two separate myosin binding protein C (MYBPC3) mutations have been identified in Maine coon cats (A31P and A74T) and one in Ragdoll cats. All three of them seem to cause familial HCM in an autosomal dominant pattern. The purpose of this study was to investigate the presence of these three mutations in population cats of different breeds with HCM in Sweden. The results may show if HCM is present in the absence of these mutations.