The way to acquire forest in Sweden from parents has been unequal, men were prioritized over women, which was the traditional inheritance pattern. Research has made this clearer by using gender, which ?values? our stereotypes of sexes and can help us understand inheritance patterns. The gender determined who would inherit but also the form of ownership, praxis, property rights, regulations, power and work invested made by a sibling could influence. The purpose with my study was to find what conditions governed inheritance of forest on the properties I investigated and what influence gender had.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

Nitrogen deposition leads to environmental damage in areas where the nitrogen deposition is high. Southwest Sweden receives an annual nitrogen deposition of up to 20 kg N/ha. Nitrogen that is not assimilated by the vegetation is accumulated in the soil, which may lead to nitrogen saturation and an elevated risk of nitrogen leaching. Nitrogen leaching from forest areas in southern Sweden has proven to be higher than from agricultural areas, which have been thought to be the main contributors to elevated nitrogen levels in rivers and lakes. The amount of nitrogen that leaches depends on the fraction of the total nitrogen in the soil that consists of nitrate, since nitrate is easily transported through the soil.

In southern Sweden, beech (Fagus silvatica) and spruce (Picea abies) are two species with similar demands on soil properties. With increased global warming and high acid deposition the future may bring larger areas were the two species are overlapping, competing for the same soil. The aim of this study was to compare spruce and beech concerning distribution, cultivation and soil properties. From available data comparisons were made between spruce and beech forests in Sweden. Soil analyses were made on samples from beech forest in southern Sweden, with and without natural regeneration of spruce.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Due to an increased population in cities the need of densification of cities increases. This means that the amount of ecological elements in the city is at risk of decreasing. Ecological services contribute to the city?s climate by softening the negative impacts that densification of cities means. Thus increases the will and ambition in city planning in to preserve greenery.This is an interdisciplinary thesis within the subject of geography that studies Biotope Area Factor (BAF), a planning tool that is used in city planning with the purpose of compensating for lost ecological services associated with new housing estate.

According to the curriculum for the Swedish preschool system, children?s development and learning should be documented and analyzed in order to evaluate and develop the preschool quality. Social criticism is directed to some of the methods of documentation for assessing the children´s individual knowledge development. The purpose of this study was to examine how, what and why some teachers use documentation in preschool. I wanted to examine which methods preschool teachers used when they documented the children and what they focused on.

To design new and high tech products the engineers rely more and more on computer based simulations to investigate the properties and behavior for a component or system.To verify these computer based simulations the dynamic properties for the components of the drivetrain needs to be verified. Therefore measurements of the stiffness and vibrations for the rear axle has been performed. This report show how the measurements has been implemented and evaluated, along with some interesting results for the rear axles properties.The static stiffness for the drive shaft along with the axle-gear has been determined. It is found that the stiffness for the whole rear axle is near the stiffness for the drive shaft, which means that the drive shaft becomes the dominant component of the system and affects the rear axle stiffness the most. The measured stiffness of the driveshaft is close to its theoretical stiffness.The stiffness for solely the hypoid-gear have been calculated using the stiffness for the rear axle and driveshaft, and thus has a range for the stiffness of the hypoid gear been determined.The backlash for the whole rear axle and for some individual components has been determined, where the backlash between pinion and crown-wheel has negligible impact on the total backlash.Measurements of the crown-wheel and pinion movements have been conducted, where the direction of movement is consistent with the theoretical direction of the forces.The vibration measurements show that the vibrations are more severe at certain rotational speeds.

The aim of this thesis is to analyze children?s picture books regarding whether and in what form gender stereotypes can be seen in these. The purpose is also to evaluate whether the findings correlate to the different regulatory documents libraries have to abide to.       The study comprises five books, who are part of a selection of books especially chosen by Uppsala City Library to be used by primary school children aged 6-9. The method used is the study of text as well as illustrations, as the theory of this thesis is that the two cannot be separated, but has to be seen a unit. Other theories used in the analysis include Nikolajeva?s schedule of male/female properties and theories on gender.      The result of the study shows that gender stereotypes are in majority regarding the characters in the books, but that the opposite also exists.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The global Positioning System (GPS) provides location and time information as long as there are unobstructed lines of sight to four or more GPS satellites. However, when this is not the case the signal may be inaccurate or sometimes even completely blocked. In these situations the Inertial Navigation System (INS) is an appropriate choice for positioning.  An INS has already been proposed in a previous thesis by Erik Andersson and the objective of this thesis is to fuse the GPS with the INS in a proper way. A part of this project is to decide the reliability of the GPS.Three methods for GPS reliability detection have been proposed. One method based on the statistical properties of each of the separate systems, and two methods based on the statistical properties of the residuals between the GPS and INS.

Swedish listed property companies report their investment properties under the standard IAS 40 that gives the opportunity to value investment properties to either historical cost or to fair value model. One problem with the fair value model is that there is no observable market price since the real estate market is far from complete which means that the price of the asset is hard to determine because of the limited information.IAS 40 gives companies the opportunity to choose between internal or external valuation and this study aims to show how the property companies? values appeared between the years 2007-2011. From the result we will study if there could be a difference in the outcome depending on if the company chose either internal or external valuation.To investigate this we observe all Swedish real estate companies listed on OMX Nordic Stockholm and their financial reports during this period of time and complement this information by interviewing people working with these matters in the property companies. The methodology for the study is therefore partly quantitative and partly qualitative since we collect data both from financial reports and from interviews.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..