Objective: The out-of-hospital cardiac-arrest incidence in Sweden averages about 10 000 a year. Whether the victim will survive or not is dependent upon rapid actions according to the chain of survival ? early alarm, early CPR, early defibrillation and early medical treatment. While waiting for the ambulance the victim is completely dependent on immediate help from any bystander, because early CPR improves survival rates by two-three folds. Unfortunately not all bystanders start CPR because of different reasons.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

Objective: The out-of-hospital cardiac-arrest incidence in Sweden averages about 10 000 a year. Whether the victim will survive or not is dependent upon rapid actions according to the chain of survival ? early alarm, early CPR, early defibrillation and early medical treatment. While waiting for the ambulance the victim is completely dependent on immediate help from any bystander, because early CPR improves survival rates by two-three folds. Unfortunately not all bystanders start CPR because of different reasons.

In this paper I will attempt to recreate a prehistoric landscape surrounding the rock carving site of Släbro at Nyköping in Södermanlands län by using GIS. The main focus area is the river valley at Släbro and the six panels with rock carvings that have been dated to the Bronze Age. I?ll attempt to shed light on a long lost landscape. The shore line displacement have been extensive in this area a reconstruction will visualize the relationship between the panels, and their relationship to the surrounding landscape.

KSL Trading Inc is a trading company in the Jönkoping area that distributesmaterial for the furniture and interior design industry.The purpose of this report is to analyze the existing material flow andwarehouse layout as well as to identify the issues there are today at KSL?swarehouse for board material. When we identified what kind of problems thatexisted we were able to design a new plan for the material flow and storagepossibilities. The problems we found where:? There is no well-organised warehouse layout? There are no routines to keep the warehouse clean and in order? There is no formed plan how to handle materialTo solve these problems we have used different methods like interviews,observations, calculations and literature studies.

SharePoint is a web based platform designed to provide internal communications and file sharing for businesses and organizations.In this project, we created a system consisting of multiple applications to be used together with SharePoint. These applications are meant to simplify the workflow for internal orders of products. The system is targeted towards companies that do not have a flexible approach to digital orders or companies that want to integrate this functionality into their SharePoint platform. The project includes, in addition to the creation of the system, installation of the software and the servers needed to run a SharePoint environment and their configurations.The system consists of four applications where one of these, the store application, is required for the system to be used at all. The other applications are an order management application, a purchase application and an incoming delivery application. Of these four, we have implemented the store application and the order management application. Our hope is that users will find the system easy to use and graphically appealing..

SammanfattningBakgrund: E- handeln av livsmedel visar på en ökande trend och svenskhandels rapport från 2012 visade en ökning på 40 % 2011. Detta medför nya affärsmöjligheter för livsmedelshandlarna och en av butikerna som implementerat e- handel är ICA- Rottne.Tidigare studier visar att kunderna efterfrågar korta leveranstider vilket kan vara svårt att möta. ICA- Rottne styr i nuläget sina leveranstider utifrån givna beställningsstopp och leveransintervaller. Syfte: Syftet med studien är att kartlägga processen från orderläggning till leverans. Syftet är dessutom att identifiera det maximala orderantalet ICA- Rottne kan färdigställa givet den nuvarande kapaciteten. Vidare är syftet att identifiera kapacitetsbrytpunkter med avseende på parametrarna antal orders och tid för beställningsstopp.

Det råder delade meningar angående närståendes närvaro under hjärt-lungräddning på sjukhus. Trots internationella riktlinjer från Emergency Nursing Association som säger att närstående bör erbjudas möjlighet att närvara under hjärt- lungräddning så följs ej dessa generellt på sjukhusen. Syftet: Var att beskriva närståendes upplevelser att närvara under hjärt-lungräddning på sjukhus. Metod: En litteraturstudie har gjorts där 13 vetenskapliga artiklar har granskats. Resultat: Närstående ville ha en valmöjlighet om de skulle närvara eller ej.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

The agriculture in Sweden today uses chemical substances to control vermin, weed and diseases. This usage shows through polluted subsoil water and trace elements in the food we eat. There?s a risk that additional symptoms will arise in the future. Our product Sha Jun, developed in 2006-2007, is an attempt to try and minimize the need of chemicals in the agriculture. The idea started with the attempt to minimize the usage of pesticides on the cropland.

This study aims to create an understanding of how employees relate to directives that come from a level above them in the hierarchy and is to be implemented in their working activities. This is studied by examining a case where a work group has tried to implement orders, given to them by the government and through a work group in the level above them in the organizations, concerning how employees working with child health care is to educate parents regarding the child convention. The method that have been use in this study is group interviews with 19 child health care nurses and the two main questions that are asked is why has it been difficult to implement the orders and how have the child health care nurses expressed their resistance to the changes, this since only five of the nurses had begun working with the child convention. The theories that have been used focus on how resistance towards change is expressed, organizational incapability and reluctance towards change, as well as how grass root bureaucrats relates to change. The conclusion that can be drawn from this study is that it is important to let the concerned parties participate from the beginning of the process, to minimize their reluctance to the changing process.

This report is the result of a case study at Peltor AB during the spring semester of 2007. The task Peltor gave us was to improve the delivery accuracy and to lower the high finical value of delayed orders (backorder), and to divide the products into logical groups. The logical group will be a useful tool to remain a high level of service. If the level of service increases the company will be more competitive.The electronic department at Peltor has problems with delayed orders. According to Peltor, the problem is based on delivery lead time which is presumed.To increase the delivery accuracy, a lead time analysis is made to find the accumulated delivery lead times for each product.

ABB Capacitors is looking to introduce LEAN within their organization. The purpose of this research is to suggest ways to improve the production planning in order to facilitate the company?s production processes. This should be done in accordance with the LEAN concept.Today, ABB will produce two of the customers? orders at the same time.

Husqvarna AB operates two warehouses located in the area of Jönköping. The most important task is to manage the large volume fluctuations during the peak season. DHL Exel Supply Chain (DESC) run the warehouses and the domestic transportations is outsourced to DHL Express. A number of forwarder agents are responsible for distributing the export gods. In the present situation a bottleneck occurs at the warehouse loading section, and the consequence is fulfill the time of delivery for all customer orders.

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.