People of the modern world consume more than they ever used to do. Because of the close correlation between consumption and the amount of waste, the waste volume is also expected to increase. The purpose of this study is to examine if some measures in the recycling process from Sweden could be implemented in Indonesia. In fact, Indonesia is one of the countries in which the waste management system is struggling. Tetra Pak, one of the world leading producer of food packaging, is studied in this report.

Underdrainage is a costly investment but often a necessity to maintain rationalized plant cultivation, one can also see underdrainage as insurance to successful plant cultivation. Late ripening crops, low yield and difficult tillage cultivation are examples on an insufficient drainage. (Kvarnemo 1983) A drained field rise in land price and the scheme of the tiled drains is seen as a value item. The interest for underdrainage among the farmers follows with shifting economic situations within agriculture and has for long time been low. A big part of the Swedish tiled drainage systems is since 1930 and ahead. Many of these tiled drainage systems need to be replaced or complemented. The life length of one tiled drainage system varies with maintenance but can still remain in good function after 75 years with correct management.

In this thesis I will discuss how US respectively EU general international security policies are formed with the scientific theories Rational Choice and Cognitive theory in mind. I?ll discuss how come US tends to go towards a more sanction orientated strategy while European Union seems to prefer a dialog and diplomatic problem solving strategy. I?ll exemplify respective security strategy through the qualitative cases study of Iran and analyse why they have taken different cores of action while trying to solve the problem with Iran's alleged nuclear weapon.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

Water is an essential factor for both people and animals, and access to water is therefore of great importance. The water access also largely determines the availability of food for people and feed for animals. The aim of this study was to survey the affect of water access on milk production from dairy animals. The study included nineteen farm visits that were made in the Nyando district in Kenya between February and Mars 2011. Farm visits included interviews with questions about for example number of dairy animals, milk production, water access, feed and water routines.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

New method for measuring road quality- A statisticalstudy of the relationship between road quality andsocioeconomic development A new tool with implications for road maintenance has the potential to yield statistical data for road quality in a large number of regions. This thesis investigates the possibility to develop a method, from this data, for evaluating the effects of road quality on socioeconomic development.The thesis is essentially divided into two parts. Part one looks to qualitatively establish the link between socioeconomic development and road quality and the second part focuses on how to develop a method for evaluating the effects of road quality on socioeconomic development. A method was devised using categorical data and a multinomial regression model. This method provides a comprehensive overview of the complex relationship between a variety of different variables.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

This study was performed in an afforestation experiment established 1982 on an abandoned peat harvesting area, Flakmossen, in the province of Värmland, SW Sweden. The experimen-tal design include planting with Scots pine (Pinus sylvestris), in combination with various drainage intensities (20, 30, and 40 m between ditches), and fertilizer doses 0, 100, and 200 g PK per seedling applied at the date of planting. The aim of this study was to achieve more knowledge about the conditions on afforestation of peat harvesting areas, especially regarding drainage intensity and fertilization requirements, by means of determining the stand growth and yield in the Flakmossen trial. The forest growth did not differ significantly between the drainage intensities tested when the same amount of phosphor and potassium fertilizer was added. Thus, shorter distances between ditches than 40 m can not be recommended. When no fertilization was carried out seedling survival was very low, and the growth of sur-vived seedlings was poor. The largest diameter and height growth were observed in the areas where the highest dose of phosphorus and potassium (200g/seedling) was given.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

Livestock of pastoralists provide meat, milk, blood, dung and are useful for transportation purposes. In semi-arid and arid areas with very low precipitation the herder must often walk far distances to feed the livestock. This affects the animals? production, especially of milk. Previous studies have investigated how to improve milk production in terms of milking strategies in cattle.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.