In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

Examensarbetet utfördes på NCC Halmstad under våren 2010. Syftet med examensarbetet var att klargöra vad visuell metodik kan tillföra byggbranschen och hur det upplevs av personer som utför byggprojektArbetet innefattar en kvalitativ och en litteraturstudie. Den kvalitativa studien genomfördes med hjälp av sju intervjuer inom Region Syd med personer som arbetat med den visuella metoden NCC Projektplanering. Intervjuerna har ägt rum för att ta reda på hur den visuella metodiken fungerar i praktiken.Litteraturstudien innefattar en utredning av begreppen Lean, Lean Production, Lean Construction, Last Planner och NCC Projektplanering. Den röda tråden från Lean till NCC Projektplanering är att genom ständigt förbättringsarbete skapa engagemang och ökad delaktighet.Den generella uppfattningen av NCC Projektplanering är positiv, dock varierar uppfattningen av metoden efter aktörernas inställning.

Swedish agriculture faces future challenges regarding food production and land use. Increased competition for agricultural land creates complex situations, where conflicts may arise when productive crop land is in demand not only for food production but also energy- and fodder production. On top of that there is an obvious conflict of goals between agricultural production and non-agricultural exploitation of agricultural land. In several emerging economic regions it is noticeable how agricultural land is being expropriated for development of urban settlement and infrastructure, carrying potentially significant long-term effects. During the last decade the exploitation of agricultural land in activities other than food production has increased in Sweden and is expected to continue in the same manor. Approximately 700 hectare of land in Sweden is diverted from food production, annually, and in 2013, the Uppsala Municipality showed the greatest change in land use of all municipalities (SCB, 2013).

The public sector is a major purchaser of goods and services. By setting requirements for environmental and social considerations in public procurement, an authority has the possibility to use consumer power to influence the actors in a market. The purpose of this paper is to investigate public procurement of textile products in a municipality, in order to gain knowledge about factors that may be important for the use of environmental and social criteria. Håkan Hydén´s (professor in sociology of law) norm model was used as the basis of the analysis, where the conduct was investigated along three dimensions of the norm ? willingness, knowledge and system conditions ? in order to identify underlying factors that can influence the process.The results ? analyzed by using interviews and documents ? show that the procurer's willingness, motivation and knowledge are important factors in this context, as well as the political priority of the municipality.

Foreseeing future changes in economic activity is of up most importance to a wide array of actors. The time lag in the presentation of official GDP statistics means that to somewhat accurately capture a tendency of where the business cycle is heading one need turn to qualitative sentiment indicators such as Purchasing Managers? Index (PMI) and official sentiment indicators for valuable clues. This thesis uses in-sample and out-of-sample methods to evaluate how well PMI and official Business Tendency Surveys (BTS) in Sweden and Denmark fair against the year-on-year growth rate of industrial production. Moreover, various Swedish regional sentiment indicators get examined and a case study of the indicator for the Öresund region is performed.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Syfte: Bakgrunden till detta arbete är att samfälligheten Långbacka där en av författarna bor har haft betydliga problem med värmeförluster. Vår uppsats bygger på att hjälpa styrelsen att lösa denna problematik. Till denna praktiska frågeställning har vi lagt en vetenskapsteoretisk aspekt genom att problematisera beslutsfattande i styrelsearbete.I denna uppsats har vi haft som syfte att ikläda oss styrelsens roll och genom att själva vara en del i processen få känna på den komplexitet som uppstår kring beslut.Metod: Vår teori är insamlad utifrån tre olika synvinklar. Dessa är rationell, icke rationell och en ekonomisk beräkningsmodell. Till dessa teorier har vi empiriskt samlat in information dels genom strukturerade intervjuer men även öppna samtal.

Inspection errors are nowadays usually written with pen and paper during building inspections. A company in Stockholm is developing a method by which inspections are made digitally from the beginning and where the inspection attachments shall be stored in a database. The idea of this method is that entrepreneurs can use the database to get an experience feedback from previous surveys so that they can improve their production processes. One problem that occurs is how inspection errors will be sorted into the database. They have to be sorted so that contractors or clients can use and sort out the information in a sensible way when they want to evaluate and make improvements in their production processes.This thesis examines how the inspection errors can be sorted in a structured manner.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The art of producing films have been around for more than a century and the technology just continues to evolve. But although much has happened in 100 years, there are also processes, theories and practices that look the same now as then. I write this thesis because I want to find the differences between the analogue and the digital way of production. This study is based on a qualitative approach because my ambition is to seek the views concerning film production processes. The advantages of analogue film is that it contains more information than the digital formats and that it has a more cinematic style.

Volvo in Arvika produces wheel loaders, and the production is based on forecasts. When a machine is ordered, the customer can choose what type of equipment he or she wants, and these equipments are also made forecasts on. This is made by giving each equipment an estimated procentual usage that shows how many of the machines that will use this option. Today two people are working with the forecasts, planer A in Eskilstuna and planer B in Arvika. Planer A makes a forecast based on the historical outcome and planer B then makes adjustments of this based on how many options that are ordered.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

?Death in the pot.? The Fruit and Vegetable Preserving industry in East Scania during the 20th centuryA Company History.At the end of the twentieth century, only one of the six companies previously active in the Fruit and Vegetable Preserving Industry in East Scania survived as an independent company: Kiviks Musterier AB. Actual production remains at two sites only. The aim of this study is to determine the reasons for this development. The companies included in the investigation are AB Bjäre industrier, Gustaf Bong AB, Kiviks Musterier AB, AB Ruuthsbo konservindustrier, Th.

Byggbranschen brottas idag med en hel del fel och brister i byggprocessen. Exempel på problem är bl.a. höga byggkostnader, kvalitetsbrister samt att det förekommer slarv och okunskap. Produktiviteten i byggbranschen har inte utvecklats lika mycket som i tillverkningsindustrin som använder sin ledningsfilosofi Lean Production.Syftet med detta examensarbete är att få insikt i vilka vanliga fel och brister som förekommer i byggbranschen, samt att kunna ge förslag till förbättringar i enlighet med lean-tänkande. När man talar om Lean i byggsammanhang benämns det Lean Construction.