Hammarby Sjöstad is a new district in Stockholm with high environmental standard. Stockholm Water Company evaluates a local wastewater treatment plant with cutting edge technology. The first step is an experimental treatment plant (Sjöstadsverket) with four parallel lines of treatment, each with a capacity to treat wastewater from 150 persons. Within the membrane technology subproject the possibility of using reverse osmosis (usually called RO) to regain nutrients is examined.Reverse osmosis separates the incoming water in a clean permeate and a concentrate that, as the name indicates, is a more concentrated version of the incoming water. Using this method in wastewater treatment, a solution high in nutrients can be obtained without the use of chemical precipitation agent and with no production of sludge.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

A Swedish company, company F, will establish a new factory in China. Company F is adivision within Company F. The factory in China will manufacture wire products. Thepurpose of this final thesis is to analyse which legal and practical measures the company hasto undertake during the process of localization to get approval from the Chineseenvironmental legislation.An analysis of the influencing factors on the environment from the production in theconstruction in Sweden was carried through. A material-balance was analysed according tothe flowchart of the production.

Intresset kring lågenergibyggnader blir allt större och så kallade passivhus, med god isolering, hög lufttäthet och värmeåtervinning, byggs i allt större utsträckning i Sverige och andra europeiska länder. Vissa frågetecken har dock uppkommit kring inomhusklimatet i husen och risken för både under- och övertemperaturer. En annan viktig aspekt är hur husens egenskaper påverkar värmelasterna och hur detta i sin tur påverkar energiförsörjningssystemet. I detta examensarbete undersöks dessa båda aspekter ? värmelastegenskaper och innetemperaturer ? i fyra likadana nybyggda flerbostadshus i Falkenberg.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

Worldwide consumption of cheese has increased over the years. The average Swede consumes somewhere around 20 kilograms of cheese per year, which is an increase of a 100 % over the past 50 years. One of the most popular kinds of cheese during the past decades is mozzarella, due to its? use as pizza cheese. Flavor and consistency differ between the traditional kind, made out of buffalo?s milk, and the industrially made kind, made out of cow?s milk.

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

This thesis reports on a case study of two different organisational forms in the Swedish forest industry; the geographic and the functional organisation. The work in the geographic organisation is carried out within districts under the supervision of an overall responible district manager, where as in the functional organisation the work has been divided into functions headed by function managers. Forest magement, logging and wood purchases are examples of such functions. The general idea of the functional organisation is having the functions working over a larger geographic unit, without subdividing district boundaries of the region. Also a third organisational form of current interest for the forest industry; the process orientated organisation, is analyzed in the case study. Here, a company outside the forest industry has been analyzed, since no forest company was considered to have made as much progress of changing organisation to process orientation. In the report I present the results from qualitative interviews, where I give the reader a picture of the motives behind each organisational form, what the form implies for some of the company?s interested parties and the organisations? views on future organisational development.

The aim of the thesis was to investigate energy consumption and carbon dioxide emissions from an advertisement broadcasted on the radio or the television or distributed through press. The object was to calculate the amount of carbon dioxide emissions per individual receiver of an advertisement in Sweden. There was no room for a deeper investigation into editorial work within the framework of the thesis. Consequently, main focus of the radio and television study was on broadcasting itself and the components involved. Focus for the press study was on paper production, printing and distribution. Production and discarding of media equipment was not taken into account.

Do new, attractive neighborhoods meet the requirements of being socially sustainable? This essay is based on the potential conflicts between the pursuit of social sustainability, while the theory of the creative class influence city planning. Social sustainability is difficult to measure, but implies broadly that everyone should have equal rights and opportunities. A city or region that aims to attract a certain type of people by providing what they ask for, might pay less attention and spend less resources on the rest of the population. Socially sustainable - for whom? The new district Hyllie in southern Malmö stands in focus, and the paper seeks to identify how different operators in Malmö defines the concept of social sustainability, how it is implemented in the design of Hyllie, and if any potential conflicts may arise.Interviews with the following informants; representants from the Office for City Planning in Malmö, the nonprofit organization Sustainable Development Skåne, the Commission for a Socially Sustainable Malmö and the company Skanska Öresund have constituted the main methodology, among with reading and analyzing existing documents and policies relating to the development of Hyllie.