Internetfenomenet ?Distributed Denial of Service?, förkortat DDoS, beskrivs ofta som ett av de största hoten mot Internet idag. Genom att utnyttja den grundläggande strukturen i kommunikation mellan nätverk och datorer kan kriminella blockera och stänga ute webbplatser och -tjänster från användare, samtidigt som det är mycket svårt för offret och myndigheter att någonsin identifiera den eller de skyldiga. Enorma globala nätverk av ovetande människors infekterade datorer fjärrstyrs till att utföra angrepp mot alla sorters organisationer på Internet med olika motiv, som finansiella, politiska eller för ren vandalism. Syftet med det här arbetet är att göra en dagsaktuell kartläggning över läget kring DDoS-angrepp och titta på statistik över de mest förekommande angreppstyperna, och se om den nyare publicerade forskningen kan svara på de pågående och framträdande trender som kan ses.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier.

Scania Top Team is a competition where the best mechanics in the world are competing against each other. In 2011, the world final was recorded and this material is now used to see which problem solving strategies these top of the line teams are using to solve the realistic problems assembled in front of them. To help them, the mechanics are allowed to use two of Scanias IT-systems: Scania Multi and Scania Diagnose and Programmer 3. This report consists of two parts. The first part is the development of a method to analyze the recorded material.

This thesis should be regarded as an integrated research synthesis. The purpose has been to analyse how the literary sociologist Lars Furulands model the literary process correlates in relation to todays book market for fiction. The central problem has been: In what different ways can some of the main actors featuring in Furulands model of the literary process use, produce or provide copyright protected works of fiction which are electronically distributed? Three questions have been considered to penetrate this problem: In what different ways can to judge from some projects which have been carried through at common public libraries electronic works of fiction be provided to their presumed readers? What reasons could there be as it appears in a number of texts that four Swedish authors have chosen to disseminate their works of fiction by the aid of the Internet? Which main functions may, according to current research, be supported by electronic media in connection with editing and retail of fiction? During this study a picture of two quite disconnected processes of publication has materialized. These processes seem to proceed parallelly to each other, without any close contact, in a traditional respectively an electronic circuit.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Today significant resources are provided to improve the digital work environment within the Swedish healthcare to create efficiency, good work environment and patient safety. Despite this, major flaws are shown by the lack of communication between the eHealthcare systems. This becomes a stress factor among healthcare professionals because of increased administration and decreased physical contact with patients. The purpose of this study is to create a understanding of the concept of interoperability at different levels in the eHealthcare systems. This has been conducted through a qualitative interview study at a healthcare center where the respondents have been describing their digital work environment and the way it works today.

The purpose of this master?s thesis is to study attitudes and standpoints among a few librarians towards literature with state supported distribution provided by the Swedish Arts Council. By qualitative interviews with librarians at five different public libraries, the thesis examines which attitudes that flourish concerning the titles, how the circular of books is treated, where the titles belong on the literature map and if the system is producing a standardisation of this literature and if the conception of quality is relevant. We also study how the librarians relate to intentions of the Swedish Art Council with the distributed titles and how they regard their availability. Our theoretical framework is based on Hans Hertel?s model of five literary circulations and Theodor W.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier. We also wish to find out the cashiers opinions about the Extenda Retail system. Method: The information gathered for this thesis consists of literature and interviews.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.

The energy sector is facing an impending paradigm shift. Today?s technology enables the end-user to generate their own energy locally at home. Furthermore, recently developed storage technologies make it possible to balance energy demand with stored energy and integrate district heating with the local power grid. This means that in the future heat and electric power will interact and energy flows is converted over energy boundaries.

A good power quality can be an important prerequisite to achieve a sustainable society. Scandinavia's electrical system is in many respects superior, and Sweden has a fossil free electricity generation at 97 % and a reliability of electricity distribution at 99.98 %. Meanwhile, the EU has an ambition to expand the electricity market in order to achieve a joint trading business across Europe. This cross-border market will result in a large proportion of fossil energy sources integrated into our electrical system, which also leads to an increased need for renewable electricity production in Sweden. One part of this development is to increase the share of renewable micro generation that is locally or regionally connected to the power grid.

This thesis presents a comparative study of image registration at two picture collection libraries. The two registration systems are analyzed as to the theoretical principles behind them and their practical application, and related to theoretical tools for subject analysis and bibliographic standards. While a growing number of picture collections now digitize their material, generally accepted standards and methods for the registration of digital images are still lacking. Many different systems coexist, often developed in-house in response to ad hoc needs and based on traditional registration tools created for textual documents, resulting in internationally incompatible mixed-format systems. The two picture collections examined here, however, have opted for similar, standardized tools for registration and subject analysis, and while there are differences in their application and focus, they have both considered issues of cross-system compatibility.