The purpose with this thesis is to get a compilation of all the critical bolted joints of all enginesproduced at LV Motors. ABB LV Motors produces induction engines with seven shaft heights. Eachengine size exists several variants of components ex. standard shield and flange shield. Depending onwhich components the engine is equipped with arises various types of strains in the engine's parts,certain assembly ways are more favourable than other.The most critical parts in the engine from a mechanical point of view are the screw units betweenshield/stator, feet/stator and bearing cover/shield.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

A LED spectrometer has been constructed for qualitative spectrometry using certain wavelenghts. The LEDs and the photodiode are being controlled with a microcontroller that is connected to a computer to power the components and save data. The spectroanalysis made with the LED spectrometer were significantly different to a standard spectrometer, concluding that more analysis should be made until a final product is ready. Some areas of improvements are suggested. .

Introduction: Analysts worldwide valuates stocks and companies by using different valuation models. The models are used to calculate how much public company?s stocks are worth and to identify whether stocks are over- or undervalued.  Objective: The objective of this essay is to study which valuation models are mainly used by financial analysts in Swedish banks. The purpose is also to study how reliable these models are considered. Method: The empirical study is based on a qualitative approach through interviews with financial analysts. The study includes both primary data (interviews) and secondary data (literature, websites and scientific articles)Theory: The theory chapter includes methods of analysis (fundamental and technical analysis), Valuation models, components of valuation and an example of a valuation with the Discounted cash flow model. Empirical study: The study includes a qualitative research that consists of interviews with financial analysts.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

HAFA Bathroom Group has given us the assignment to develop a standardized back panel for their bathroom cabinets. This cabinet is going to be applied to most of their current and future cabinet solutions. To this point, they have constructed unique suspensions-and back panels for most of their cabinet models. They have also been forced to pull wiring and assemble the cabinets differently because of factors like; position of the wall sockets, dimensions of the cabinets and their shapes.The company wants to distance themselves from their current solution, firstly because the cost of having manpower to design each individual suspension solution, secondly because they will save a lot of money when the manufacturing process requires a minimum of components to be constructed. As a result of this, the company can use their resources better to develop future products.The main idea is that the consumer isn?t required to change the suspension or back panel when they decide to buy a new cabinet.

A totally mixed ration (TMR) is a mixture of all the necessary feed components for the cow. She will eat the exact same feed in every bite which will make the rumen pH more stable and always supply her with a constant proportion between roughage and concentrate. This will make it possible for the cow to eat more dry matter (DM) a day because the fibre requirements are fulfilled. If a part of the concentrate is given separated from the mixture it is called partly mixed rations (PMR) and is almost always used when using an automatic milking system (AMS). When using TMR and PMR it is important to have a high hygiene, be accurate when mixing the feed and to look after cows in a good and strict way. The aim of this study was to document different farms with PMR in an AMS to see which routines they have and how they are managing their production.

This thesis has been done in collaboration with Höganäs Digital Metal. Höganäs Digital Metalwork with 3D printing of metal and need giveaway components that they can give tocustomers to show their development process.By making a parametric CAD model can we generate about 200 different designs of a?Höganäs brännvinskrus? in miniature. You can choose between different items that shouldbe in it and a variety of perforations to look into it..

The accounting information system comprises budgeting, accounting, and costing. The accounting information system has, traditionally, constituted an integrated system where the different elements collaborate. If ABC is introduced this order is disturbed, since ABC is based on another logic which cannot easily be integrated with budget and accounting. ABC, therefore, is usually used parallely to the conventional costing method. There are, however, companies that have taken its ABC one step further by letting it replace the old costing model and integrate it with the accounting information system.

The purpose of this paper is to examine the role of logotypes within the visual identity and identify possible reasons that motivate companies to change their logo. This paper should also clarify how different parts of the visual identity affect each other and how they are interconnected. The thesis research question is formulated with the purpose in mind and has led to the following question: How can a logo change contribute to enhanced visual identity? Since we wanted to obtain a better understanding of the chosen research area with help of interviews have we chosen a qualitative method for this thesis. During the process we have let the empirical material control the chosen theories.

Den växande konkurrensen mellan företag har medfört att dess försörjningskedjor blivit ett medel för att erhålla konkurrensfördelar. Genom ökat fokus på lägre kostnader, förkortad livscykel på företagens produkter samt en ökad efterfrågan har resulterat i att försörjningskedjan hos företag ökat i komplexitet. Denna ökande komplexitet har skapat ett behov av att identifiera problem i försörjningskedjan. Vidare har den ökande konkurrensen medfört att ett företags ledtid blivit en viktig parameter. Hos Make-to-Order (MTO, tillverka-mot-order)-företag kan en kort ledtid vara en avgörande faktor för att bli ordervinnare.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

To have motivated employees is important for companies so that they are able to keep valuable competence within the organization. This report treats a relatively new concept for increasing the motivation of employees. It is however, a concept that gets more and more attention. It is called gamification.Gamification is defined as ?using game design elements in non-gaming contexts?, i.e.

HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

The projects goal is to construct and program a robot that is controlled from a computer but also have an obstacle handling function that allows the robot to navigate around the object by itself.The robot is a simple construction and the number of components and functions is kept at a minimum. A tricycle construction was chosen because it?s the simplest. Communication between the robot and the computer also kept as simple as possible..