This paper was made together withTechPay AB, by their request.The dissertation has been divided into two separate parts; one of which is fully theoretical, with the focus on the security requirements of a digital cash register, and how to meet these requirements.The second part covers the implementation of anAndroid-oriented Java-library,created with help from the security requirements found in the first part. The purpose of this library is to make it easier to develop a cash register that uses payment terminals from TechPay.This paper also covers different communication protocols, encryption techniques and recommendations from authorities, banks and Android. This paper also contains a small review of how users are validated in applications on the current market that handles money transactions..

In this study, we investigate various lighting applications in a virtual environment, where we compare between light based in naturalism (natural light) and pictorialism (artistic light). The purpose of this study is to gain further knowledge in lighting, which is increasingly important for game graphics. Theory are examined to gather information and recommendations on how to use various light settings that convey different emotions. We then use this information to illuminate the environment that we have built. The environment is presented in Unreal 4 for respondents who are allowed to move around freely in the environment.

Due to excess precipitation that cause runoff, all soils in Sweden naturally leaches nitrogen.High leaching from arable land is an environmental problem when the runoff reacheswaters. In the international agreement, Baltic Sea Action Plan, the aim is to reduce therunoff of nutrients. Sweden has agreed to reduce its load of e.g. nitrogen to the Baltic Sea.One of the proposed measures is an increased use of site-specific N-fertilization, which hasbeen shown to increase nitrogen use efficiency and therefore also reduce the nitrogen runoff.Either yields are increased with the same total amount of nitrogen, or the total quantityof nitrogen is reduced with preserved yield levels, which is profitable for the farmers.The dynamics of nitrogen leaching differs between top dressing applications above orbelow the economical optimum. There is a consensus about a difference in the dynamics,but not about its magnitude.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.

Patrullerande poliser i Malmö har en varierande och oförutsägbar arbetsmiljö. När de kommer till händelser där de är osäkra på hur de ska agera kan de konsultera tryckt metodstödsmaterial. Dessa tryckta handböcker är ofta utdaterade och icke-standardiserade. Tillsammans med Polisen i Malmö har vi tagit fram ett förslag till hur en digital version av denna typ av material kan se ut, med förslag kring gränssnitt och informationsrepresentation, och en diskussion kring vilka potentiella konsekvenser ett mediebyte kan få för poliserna ute på fältet. För att ta fram dessa designförslag använde vi oss av ett antal interaktionsdesignmetoder. Dessa utvärderar och diskuterar vi, utifrån hur väl de fungerar inom en myndighet som Polisen, i kontexten patrullerande poliser i Malmö..

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

Heat, clock scew and frequency optimization are some of the problems a semiconductor designer must face. By splitting a synchrounous block into multiple pieces which comunicates asynchronously with eachother and provide them with independent clocks, these problems may be reduced. GALS (Global Asynchronous Local Synchronous) is a wrapper that wraps a synchronous block and provides it with a clock. Multiple GALS-elements will make the whole system. The clockfrequency may be independently adjusted between each block.

Minskad effektförbrukning har blivit mer och mer intressant i takt med att fler produkter blir mobila. I artikeln Parallel Implementation of Linear Feedback Shift Registers for Low Power Applications, beskriver Menahem Lowy en metod för att konstruera slumptalsgeneratorer. Dessa är tänkta att vara effektsnålare än en vanlig enkel slumptalsgenerator, med återkopplat skiftregister. I det här examensarbetet har sex slumptalsgeneratorer konstruerats i VHDL. Två är baserade på Lowy?s metod och två är parallella varianter av dessa.

In this Bachelor thesis I explore sound and room as elements in design of user interfaces, both theoretical and practical in a specific application domain, to identify some of the advantages and disadvantage associated with these elements. As application domain I studied email clients and their usage at home amongst students at Blekinge Institute of Technology. In the study I found an activity, which seems to be highly distributed in the physical room where the user is located. The activity was notification of email and could take place in an arbitrary location of the home. I then augmented this activity with ideas from my theoretical assumption about room and sound.

Planet rendering plays an important role in universe visualization and geographic visualization. The recent tools and methods allow better data acquisition, usually with very high resolution. However in computer graphics, there is always the limitation on the resolution of geometry and texture due to numerical imprecision. Not many applications can handle high resolution data effectively.This thesis introduces, Implicit Surface Scene, a level of detail scene management inspired by dynamic coordinate system and SCALEGRAPH? which change over time depending on the current camera position relative to the planet surface.

This paper deals with the question of when hill forts ? or enclosed mountains ? were built and to what purpose, by examining two enclosed mountains (RAÄ 78 and 79) in Grödinge parish in the province of Södermanland. A phosphate analysis was conducted to trace anthropogenic activities. The analysis showed only a slight elevation of phosphate content in the soil. A histogram indicated that the elevations were not normally distributed, which could suggest that they were caused by anthropogenic activities.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

This report present the design and manufacturing of a wide-band driver amplifier placed in radar module for airborne applications. The major goals for the amplifier were a high efficiency and to deliver a predefined output power. To reach the second goal an additional preamplifier had to be constructed. The amplifiers were constructed in three steps: Design and Layout in the software Microwave Office, Mounting components and Verification. The driver amplifier was decided to be a push pull configuration consisting of two parallel transistors biased in class AB.

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed..