I samband med fastighetsaffärer har ansvaret mellan parterna delats upp så att köparen ansvarar för faktiska fel medan säljaren svarar för andra typer av fel. Köparen har dessutom en långtgående undersökningsplikt för fel som denne inte har möjlighet att senare påkalla mot säljaren. Säljaren har å sin sida en upplysningsplikt som dock inte är generell utan omfattar endast vissa fall. I samband med domen i NJA 2007 s 86 kom frågan om felets väsentliga betydelse för köparen och själva köpet som sådant upp. Tyvärr gjorde HD ingen utförligare utredning av vad som skulle bedömas eller omfattas av begreppet.Till följd av att rättpraxis saknar en utförlig förklaring kring vad som ska omfattas av begreppet väsentlig betydelse trots att det vid flera tillfällen använts i både rättspraxis och doktrinen har detta utgjort grunden för den här uppsatsen.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

A business is always dependent on its customers. It is therefore important to ensurethat customers are satisfied with the product and the warranty included.The study was conducted in cooperation with the building contacting companySkanska Sweden. The aim is to use interviews to collect and process experiences in order to answer the question: How should the recovery process in the construction industry be performed to ensure a professional handling of warranty? The results have shaped my conclusions and I have turned them into a proposal that companies in the industry can benefit from. The study indicates that the industry is not geared for a five year warranty, which was introduced in 2004 and 2006.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Fair trials? rights under Swedish law of public administration (FL) are regulated by Article 7 of the Statute. Similarly, fair trials? right under the European Convention of Human Rights (EU Convention) is regulated by Article 6.1. The essay conducts a comparative study of the two legislations and seeks to determine whether Article 7 of the Swedish law of public administration is consistent and compliance with Article 6.1 of the EU Convention.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

Two haematological instruments intended for small animal clinic use were evaluated at the Department of Clinical Chemistry, Swedish University of Agricultural Sciences (SLU), Uppsala, Sweden. The QBC-V and Vet abc were compared to a reference instrument, the Cell-Dyn 3500. Fresh blood samples were obtained from canine and feline patients from the University Veterinary Hospital, SLU. The QBC-V was used for 111 canine samples and 78 canine blood samples were analysed with Vet abc. From cats, 23 samples were analysed with both instruments.

Course: Degree project in logistics, 4FE05E, spring 2013Author: Maria WennbergSupervisor: Petra AnderssonExaminer: Helena ForslundTitle: Standardization and improvement of the outbound process execution Background: Transportation represents a critical part of companies? logistics. Special management and control is needed when using a third party logistics. Balco uses a third party logistics for their deliveries of balcony parts and before it takes place the outbound process is executed. Currently, Balco experience difficulties with the process? many ways to be performed by the project managers and logistics department.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

De uppgifter som revisorn presenterar i sin revisionsbera?ttelse bo?r intressenter och fo?retag ha fo?rtroende fo?r. Revisorn ska vara en oberoende la?nk mellan intressenter och fo?retag. La?saren fo?rva?ntar sig finna eventuella ekonomiska problem i a?rsredovisningen.

Reading difficulties is the most common learning difficulty in the western world and it is common that people with reading disabilities also exhibit arithmetic difficulties. Different theories about the cause of the relationship exists, one theory describes the importance of good phonological ability in reading as well as in arithmetic, while another theory describes the importance of a reliable number system and that only a subgroup of students with reading disabilities also have difficulties with arithmetic. The purpose of this study is to investigate how students with reading difficulties (RD), without any known mathematical difficulties, perform on mathematical tasks relative to a control group. The study was theoretically grounded on the Triple code model (Dehaene, 1992), which is a model for numerical information processing that describes how various numerical and arithmetic tasks are processed through three distinct representation systems in the brain, a verbal and a visual representation system and a quantity system. Reading skills, phonological skills, arithmetic skills and number processing skills were examined in 61 students through a variety of tests.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.