Objectivity is often emphasized as one of the fundamental principles for the auditing profession and is also a requirement for preserving satisfactory professional practice. The multiple company scandals in the first decade of the 21st century have created distrust for auditors? capability to maintain objectivity. The purpose of this study is to contribute with a new way of thinking when it comes to the factors that affect objectivity. Earlier studies have indicated that personality factors may affect work performance in many different fields and this study is exploring the connection between separate personality factors, and the capability of less experienced auditors to maintain objectivity in the relationship with dominating and demanding clients.Data was collected through a survey that was divided into two separate parts where the first part measured the participant?s score on different personality factors, and the other part measured the participant?s score on perceived objectivity.

Background and Introduction: Environmental report drew attention in the 1980s when the Va?rldskommissionen fo?r miljo? och utveckling received a mandate from the FN to investigate the relationship between economic development and environmental degradation. In connection with this, although sustainability a new item for many businesses. But to say exactly what sustainability is all about is very difficult. In 1996 the then Government Redovisningskommissionen a study on the introduction of an amendment to the Annual Accounts Act, which would force companies to report on environmental issues in their annual or consolidated accounts.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Background: The Swedish Financial Supervisory Authority?s mortgage limitation, of mortgaging up to 85 percent of the market value of the real estate was introduced on the first of October 2010. The aim of the recommendation is to prevent a detrimental development of the market for mortgages while at the same time creating incentives for the consumers to limit the debt level. The mortgage limitation is a recently adopted recommendation and few studies have made a thorough analysis of its effects, hence it is an interesting topic to study.Aim: The aim of this study is to analyze the initial effects of the mortgage limitation for consumers, banks and estate agencies. Furthermore, the study aims to evaluate drivers of consumer debt levels and conclude whether the mortgage limitation will result in lower debt levels for consumers.Completion: The study is based on interviews with respondents from banks and with respondents from estate agencies to enlighten the initial and long term effects of the mortgage limitation.

International trade in services has increased over the past 30 years as a result of progress in information and communication technology, increased focus on services from the manufacturing sector and the establishment of trade associations.The international market for healthcare services, also referred to as medical tourism, is growing more and more. Patients increasingly seeking treatment at other countries healthcare systems because of long queues within their own country or because it exists better prices for the same care abroad. However, this type of service exports occurs at a limited extent in Sweden.The purpose of this study is to highlight and analyze the conditions for Swedish service companies to export healthcare services. This, includes the challenges and opportunities that exist to expand the exports of these services.The approach for this study has been in the form of interviews with two market actors and written responses, from the same interview guide, with three market actors. These market participants are the so-called Care companies which export healthcare services in various counties, and the membership organization Swecare who work with export promotion activities for its members in the Swedish healthcare sector.

The demand for shorter lead-times and increased delivery reliability puts pressure on companies to provide more efficient logistic services. One strategy to deal with this demand is by outsourcing logistics to a third part. The development of logistics information systems enables increased control over business supply chains. This is why Green Cargo aims to create a Logistics Control Tower (LCT) solution to provide it?s customers with better information with higher availability.

Denna rapport är skapad som syfte till att redovisa det erhållna resultatet av examensarbete vid Affärssystemprogrammet vid Kungliga Tekniska Högskolan (KTH). Arbetet har utförts som uppdrag för det serbiska företaget Soprex som är en underleverantör till ett svenskt företag. Rapporten är uppbyggd efter IMRAD metoden (Introduktion, Metod, Resultat och Diskussion).Uppdraget var att skapa en kravspecifikation för en modul som är en del av applikationen för hantering av olika kontrakt och prisberäkningar för Soprexs kunds olika kunder. Detta arbete fokuserad på kontrakt modulen. Arbetet har varit uppdelat i tre olika steg, syftet med detta har varit att successivt slussas in i företagets sätt att arbeta och lära känna deras standarder.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.

In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

AbstractBuying real estate property is a complex process for the uninitiated. Apotential buyer has to keep track of laws and regulations affecting theproperty. The purchase of a property is for many also the largest deal made inlife and because of that it is especially important to make sure everything getsdone correctly.A real estate property purchase contains a number of different elements, suchas engineering data and inspection of the property and documentation to makesure that the signing of contracts and clauses are done according to the laws ofthat country. These purchase process steps are ordinary people not familiarwith, and therefore they hire the help of a real estate agent.Buying a property abroad complicates things because the countries have theirown laws and rules that make them different from the Swedish rules which theSwedish real estate buyers are accustomed to.Our thesis is about exploring if a Swedish buyer knows the buying process inforeign countries, or whether they rely on the broker they hired. The countrieswe have chosen to examine and compare against Sweden is Spain, Thailandand Turkey.Our questions will be answered by interviewing buyers about how they feelabout their buying process, if they encountered any problems before, duringor after their purchase, and if they are happy with their purchase after theevent.Our study shows that the buying processes in all four countries are generallyequal to each other.

This thesis is performed in cooperation with Prodelox AB and JTI (Swedish Institute of Agricultural and Environmental Engineering). The purpose of the project is to generate and develop a WC-technique with a closet sewer that keeps a higher TS-substance than 1.5 %. The WC-technique is mainly directed towards permanent households in sparsely-populated areas and cabins. The goal is to generate concepts of toilets with an extremely low use of water in terms of flushing. The design should be appealing and touch more senses than only the visual.