Hybrid working solutions have become increasingly common following the outbreak of the Covid-19 pandemic. This new way of working introduces organisational challenges regarding how the culture within an organisation is created and maintained in an environment that combines both a physical and digital presence. This study aims to explore how hybrid work affects an organisation?s ability to develop and maintain its culture, as well as the digital tools and strategies used in the process. This will be studied through an employer?s perspective.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

The northern province of Sweden has in both literature and film been depictured as something foreign and mythical, unlike the rest of the country. It has been my purpose to show in this essay that the systematic categorization of Norrland and its literature reveals multiple criteria known to define the colonial era. By reading the novel Stallo by author Stefan Spjut with postcolonial structures in mind I aim to show how the author uses Swedish mythology and through the presence of The Other criticizes colonial structures in place to this day. By examining the gothic atmosphere I intend to indicate how the trolls in the novel figures as both a horror element as well as a representation of nature itself. It is my belief that the author by further reinforcing the mythological in relation to Norrland addresses the problem at hand.

This study is about to see whether the two models representing the strategies of lean production is to use and apply in different companies. The models are structured in two different ways in which one of them is checking the softer elements of lean production in the form of leadership and strategies. This model is called Lesat and is based on interviewquestions. The second model, called "learning to see" is about identifying flows. This, together shall then give an idea of how mature companies are when it comes to a whole in the concept of lean production, and susceptibility to use these models to their respective companies. The study is conducted in two companies, SKF couplings systems and AQ parkoprint.

Value-at-Risk (VaR) is among financial institutions a commonly used tool for measuring market risk. Several methods to calculate VaR exists and different implementations often results in different VaR forecasts. An interesting implementation is historical simulation, and the purpose of this thesis is to examine whether historical simulation with dynamic volatility updating is useful as a model to calculate VaR and how this differs in regard to type of asset or instrument. To carry out the investigation six different models are implemented, which then are tested for statistical accuracy through Christoffersens test. We find that incorporation of volatility updating into the historical simulation method in many cases improves the model.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The potential of information technology as a means to invigorate democratic practise is constantly under discussion. Regardless of the differing opinions as to the most suitable way to utilise IT, there are certain democratic core values that have to be considered. One of these is freedom of information, defined by us as the right of every citizen to seek, obtain and express information. The aim of this study is to explore whether the use of IT as a means to enhance democracy can strengthen the citizens right to freedom of information. As an instrument for analysis we use an article by Jan van Dijk, professor of communication science.

This final project includes an analysis and a programme proposal for the area Bergsbrunna södra. The area is situated along the railway between Uppsala ? Stockholm, just south of Uppsala city. A new railway station is planned here, which make the area attractive as residential area. There are several values to take into consideration when developing an area. An extensive analysis and valuation may define and protect different characters and values, and also find the places most suitable to build upon. The area consists of three separate characters of landscape: the wide open cultivated fields, the hilly wooden ground and the more varying little valley. There are visual, cultural, social and ecological values to preserve. The south part of the area is woods with high natural values that borders to a national park in the natural forest of Lunsen.

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

The purpose of this bachelor-thesis is to investigate the possible effects of lease accounting on the estimation of bankruptcy. This is done by estimating the risk via prediction models based on accounting ratios for a sample of 43 listed firms in Sweden. Estimation is conducted twice for each firm, once base on unadjusted data as it is presented in the annual report of 2012, and one with data adjusted for operational leases (that is data is treated as if all leases present were to have been reported as financial leases). In the next step it is tested weather the predictive ability of the models is affected by this adjustment or not. For this purpose translation of bankruptcy risk into synthetic credit ratings via interest coverage ratios is done.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

Syftet med studien är att presentera olika begrepp med definitioner för odefinierade rum i bebyggd miljö. Rum som blivit över eller bortglömda i stadsplanering, övergivna och förfallna områden eller rum som saknar en känsla av identitet. Olika författare med olika bakgrund presenterar olika begrepp och definitioner för dessa rum. Genom litteraturstudier undersöks nio relevanta begrepp från publicerad litteratur. De undersöks utifrån frågor som behandlar författarens ursprung, verkets publiceringsår, begreppets definition, exempel som ges på odefinierade rum, hur rummen uppkommit samt hur de enligt författaren bör behandlas i planering.

My work has been to create a magazine for iPad to explore this format, whichthere are mixed feelings about. Instead of seeing the digital format as an enemy ofthe printed magazine, I have chosen to see it as an opportunity.I have given myself the task of designing a magazine that can justify the useof the digital magazine. I have looked at the identity of the magazine, but mainlyexplored the format and its prerequisites.I was triggered to do the project when I saw people who are just making a pdfof the printed magazine and publish it digitally. I have during my work discoveredhow near or far away you can be from the printed magazine.The format of the iPad has multiple aspects to look upon; one that turned outto be clear in my project was navigation. Working with a spread has its problemsand opportunities; the same applies to an article that is larger than a screen.

Purpose: The purpose is to research different co-operations between venue owners and WISPs, when WLAN is deployed in a public space. The aim is to establish viable business models for the interaction between the two vital actors in the public WLAN industry. In this work, the advantages and disadvantages of revenue and cost sharing will be defined, along with technical and commercial issues that need to be resolved. Methodology: A number of case studies of the current situation have been conducted in the most attractive venues for WLAN, airports. As the public WLAN market had most widespread adoption and is most mature in the USA, case airports were chosen both there and in Scandinavia.