During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

This Master's Thesis describes the design of a new system where a digital signal processor has been added to an existing imaging system consisting of field programmable gate arrays. The new system will offer a higher degree of flexibility by considerably shortening the design time and make it possible to implement more complex algorithms than the existing ones. The choice of system architecture and a test implementation are discussed. The test implementation consists of a program for the digital signal processor and VHDL code for one of the field programmable gate arrays. The code for the digital signal processor was designed for testing on an evaluation board from Texas Instruments.

Bakgrund och problem: Digital transformation ?r ett hett ?mne inom aff?rsv?rlden, med ett ?kande antal f?retag som str?var efter att anpassa sig till digitala teknologier f?r att f?rb?ttra sina aff?rsmodeller och skapa nya v?rdeskapande aktiviteter. Men med digitala transformationen kommer ocks? utmaningar som budgetber?kningar och brist p? teknisk kunskap vilket ofta leder till misslyckade transformationer. St?rre f?retag har ofta mer resurser till att hantera dessa utmaningar j?mf?rt med SMF.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

This study highlights the importance of computer technology and its impact on elder care staff's skills development in the public sector. The government presents the digital agenda within which information and communication technology today is considered to have a potential for sustainability, growth and development. According to the EU Commission, there are several important elements that should be improved to digitize the workplace. Among these are digital literacy, collaboration between agencies and increased investments in research, education and innovation. New technology can be understood in different ways by individuals, some see the computer as something positive and exciting, while others may find it hard to see the opportunities for learning and development.

The aim of this Masters thesis is to examine ideas used to legitimate Swedish digital libraries, with a focus on the cultural heritage, their relation to cultural policy and an eventual crisis within the latter. Which ideas are linked to digitalisation? How do the arguments for creating digital libraries differ between central actors? How do the digital libraries relate to cultural policy and an eventual legitimacy crisis? These are the questions this thesis seeks to answer. The theoretical starting-point consists of a legitimacy discussion and its connection to Swedish cultural policy. The method used is idea analysis.

This study focuses on the transfer between a product-oriented to a service-oriented perspective regarding marketing activities in companies due to the development of information technology. It illustrates how this very transfer has been, and can be, contemplated through the eyes of organizations working with marketing in a digital world on a daily basis. Technology has turned several industries - their price-setting, communication channels and supplying possiblities - upside-down. This turnpoint brings out a new way of observing and working with marketing. Therefore, we find it interesting to gain a better understanding of how actors within industries where the turnpoint is a fact observes marketing, and how this service perspective can be seen in their various organizations and daily.

Den här uppsatsen handlar om vad som påverkar konsumenten till att vilja använda en digital plånbok. Den digitala plånboken är femte generationens betalningsmedel och har nu kommit för att digitalisera flera av de funktioner som den fysiska plånboken erbjuder. En transaktion med den digitala plånboken sker genom konsumentens Smartphone. Förutsatt att Smartphones blir mobila plånböcker kan det antas att konsumenterna skulle vänja sig vid tanken att lämna den fysiska plånboken hemma.Det har tidigare gjorts studier på adoption av mobiltelefoner och hur människor i allmänhet tar till sig vissa tjänster men den digitala plånboken är ett relativt nytt fenomen och därför handlar vår uppsats om adoption av den digitala plånboken som tjänst.De slutsatser vi kan dra av uppsatsen är att säkerhet, enkelhet och kompabilitet kring den digitala plånboken påverkar om konsumenten väljer att använda tjänsten. För att företagen som levererar digitala plånbokstjänster ska nå största nytta bör de även se säkerhet, enkelhet och kompabilitet som centrala delar vid presentation och lansering av tjänsten..

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

Sekretessbelagd.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

This thesis examines young people's thoughts about their presence on social media. With asocial constructive approach the study focused on how young people think and act on socialmedia in relation to constructions of gender and normality. The analysis is based on fourgroup interviews with 13-year old boys and girls. The theoretical approach is based partly onsocial constructionism where discourses and ideas of normality are identified and analyzed.Erving Goffman's theory of social interaction was central to illustrate how young peoplepresents themselves based on the prevailing discourses. It is clear that they adjust theirrepresentations of themselves depending on the context.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.