The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The first of May 2005 changes were made in the Annual Accounts Act. The 2006 Annual Report of companies with more than ten employees or assets over 24 million SEK must include environmental information in the directors' report if it affects the company's development, result or position. A survey made by KPMG 2007 investigating the environmental information of companies listed on Large Cap Segment of the OMX Stockholm exchange showed that only a third of the companies, included in the survey, complied with the new law requirements. I have examined how the environmental information in the directors' report is formulated and why the information is formulated in that fashion. I have examined seven companies listed on the Large Cap Segment of the OMX Stockholm exchange. Four companies from the materials sector and three banks from the financials sector were included in the survey.

This report is about how HDR (HighDynamicRange) can be created and used in combination with Tone mapping. This work has been carried out together with Kapsch TrafficCom AB in Jönköping.The objective of this project is to:Evaluate and investigate the effects given to pictures by HDR and tone mapping.Evaluate if the technology may lead to improvements in Kapsch?s systems.To construct a program which is able to handle some form of tone mapping or HDR-algorithm.These questions will be answered in this report:What kind of effects has HDR and tone mapping-algorithms on pictures?Can the HDR-technology give better data in Kapsch?s systems?The research method used in this report is called action research. This means the authors has investigated the technology by reading different documentations and by testing different algorithms to see what kind of result they give. The report describes some of the tests made to see if the technology is appropriate in Kapsch?s system.There is two smaller reports made by the authors which documenting some of the work.The first report describes the work with different settings for a camera to create pictures with HDR-quality.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

This report describes how to process audio signals in real time with a digital signalprocessor. The digital signal processor used in the thesis and described in the reportare the Blackfin processor ADSP-BF537 from Analog Devices.In the body of this report there is theory of the processor characteristics and thevarious programming languages used. All experiments that were made on theprocessor are described, these descriptions also help in understanding the annexeswhere the experiments will be presented. The body of this report also describes theprogram used to do experiments. Testing the CPU limit was done and the results arepresented to get a good view of what it can handle.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

This report is about accessibility at rest areas. We have examined the aisles and furniture of seven rest areas with a focus on accessibility for disabled persons. At the end of the report, we provide suggestions on how some of the weaknesses we have discovered can be addressed..

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders. Now thanks to their new system they can access their documents easy and on demand through their intranet..

Inadequate data quality has a negative effect for organizations, however utilization of modern technology and data analysis may shape new values for organizations. Our research has found that the quality of information in field reports for error reporting varies significantly. In many cases, the information in the field reports are deficient in such way that the field report need additional information from the sender, thus risking prolonging lead times in the error reporting process. More efficient use of information has become possible with today?s technology.

The purpose of this study is to analyse the discourse on political exclusion in the official report Demokratiutredningen. It has been my ambition to relate the analysis of the report to a critical academic discourse on political exclusion and thereby make visible hidden norms and structures which functions to exclude certain individuals and groups from political participation.My paper point out that the report establishes a strong link between democracy and participation and that it, therefore, makes a strong case for a process of democratic inclusion. Though, in my study I suggest that that there is an unawareness of the importance of norms, hegemonic conceptions and structures and that inclusion, therefore, is unlikely to take place. Furthermore, I criticize the focus on deliberative democracy in the report. With insights offered by Mouffe in her argumentation on the necessity to acknowledge the dimension of antagonism present in all societies I underline that the focus on this democratic model is problematic.My conclusion is that the analysis presented in the report is insufficient if we want to create a democratic system characterized by equality..

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

A study was performed to evaluate whether established methods of analysis of protein content in barley (Kjeldahl, Dumas, or NIT (short for Near Infrared Transmittance)) gives different results for wet and dried barley. This was carried out because there are concerns regarding the well-worn NIT prediction model giving different results for these conditions and that such an error causes significant price fluctuations on the market. By performing analyses of samples, both before and after drying, of the three different barley varieties Tipple, Prestige, and Quench, with all the techniques, data was obtained that could be analyzed statistically. The study showed that the NIT prediction model gives results for wet barley that is about 0.29 percentage points higher compared to dried barley. This difference was also statistically significant when a t-test was performed.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

Wireless communication is becoming more common, a relatively new technology within the area is Bluetooth Low Energy. It?s been developed to be energy efficient and in regard to compatibility. Alongside the growth of wireless technology, scientists and companies are looking for new areas of use. One of these is localization, which means to determine the position of a moving device with the use of stationary devices, an example of this would be GPS.This report means to evaluate indoor localization using Bluetooth Low Energy and was made for Combitech AB in Jönköping.