Syfte: Att ta reda på förekomst av heteroforier och heterotropier hos hjälpsökande människor på en Vision for All-resa i Nicaragua.Metod: Efter en enkel subjektiv refraktion genomfördes covertest på både avstånd (fem meter) och nära (40 centimeter) med eventuell korrektion vid behov. 684 personer undersöktes i åldrarna 5-95 år. Eso- exo- och vertikalfori samt eso- exo- och vertikaltropi noterades liksom ortofori. Ingen mätning av deviationerna genomfördes.Resultat: 91 personer (13,3 %) hade en deviation vid avståndsfixation som framkom av covertestet. Exofori fanns hos 9,5 % och esofori hos 1,9 %.

The construction business is one of the most accident prone businesses in Sweden. In order to make it safer it?s vital that all employees of a company report all accidents and incidents that occur. This report intends through qualitative interviews, to analyze the knowledge and attitude towards incident reporting among the employees of the Swedish construction contractor JM.The goal of the thesis work is to hopefully contribute to an increase of employees? awareness on those issues.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

We came across the discussion about the so-called duty to report (14 kap 1 § SoL) and we found some previous research, showing that preschool teachers are hesitant to report, and that they want real evidence that children are being mistreated, even though the duty to report clearly states that they have to report as soon as they suspect that a child is being mistreated. Our purpose became to study what tendencies and conditions preschool teachers and principals, placed in the municipalities of Hässleholm and Kristianstad, have to fulfil their duty to report according to the social services act, when there is a well founded suspicion that a child is being mistreated.  We split the purpose into the following research questions:   Do local guidelines about how preschool teachers should act when suspecting that a child is being mistreated exist, and are they being followed? To what degree does the staff has knowledge about these guidelines? How do preschool teachers experience the treatment from colleagues, principals and social welfare officers when they´ve done or wanted to do a report? How do preschool teachers experience the reactions of a report from custodians? We did conversational interviews with two principals, one from the municipality of Hässleholm, and one from the municipality of Kristianstad. We also made focusgroup interviews with the staff, three persons each from one of their respective preschools. Our conclusion is that preschool teachers are unwilling to report mistreatment.

The construction business is one of the most accident prone businesses in Sweden. In order to make it safer it?s vital that all employees of a company report all accidents and incidents that occur. This report intends through qualitative interviews, to analyze the knowledge and attitude towards incident reporting among the employees of the Swedish construction contractor JM.The goal of the thesis work is to hopefully contribute to an increase of employees? awareness on those issues.

The purpose of this study was to investigate how young adults withunilateral cleft lip and palate assess their own speech and communication,and to let speech and language pathologists make a perceptual analysis ofthese individuals? speech at the age of 19 years. An additional aim was toexamine the relationship between these two different ways of evaluation.Data was collected through perceptual analysis from audio recordings and byusing a self-report questionnaire based on the ICF-structure (InternationalClassification of Function, disability and health). Altogether, 33 peopleparticipated. One third of the participants had no speech deficiencies.

This thesis studies path generation for industrial robots of six degrees of freedom. A path is defined by connection of simple geometrical objects like arcs and straight lines. About each point at which the objects connect, a region, henceforth called a zone, is defined in which deviation from the defined path is permitted. The zone allows the robot to follow the path at a constant speed, but the acceleration needed may vary. Some means of calculating the zone path as to make the acceleration continuous will be presented.

In many biomedical contexts, e. g. when evaluating hearing disorders, the data obtained can be described as pairs (x1, y1), ?, (xn, yn) where x is a quantitative variable and y a 0/1 variable whose probability of taking the value 1 is a monotonic function of x. One way of analysing such data is to perform probit regression; thereby two parameters, b0 (= the constant) and b1 (= the slope) are estimated; the interest centres around m = -b0/b1, i.

In the end of 1998 the company Holmen Skog AB was certified accordint to the FSC system with an area of 1 036 000 hectare. After that Holmen Skog AB has been working actively with the nature conservation in the forestry. In order to control the quality of the company?s nature conservation in final fellings they started a yearly inventory which is called BAKRUS (Judgement of ecological and culture care in relations to policies for a persevering silviculture). After 1999 the control was expended to include all actions in the forest.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This report describes the tactics used by the Swedish Air Force rescue services against crashed military aeroplanes and helicopters. The aim of the report is to study and analyze the tactics used by the different Air Force bases, standards, regulations and equipment. The report also discusses the different work environment problems and hazards around military ARFF. Much of the information gathered for the report comes from interviews with personnel working in and with the military rescue services. The overall conclusion is that the basic conditions for a good ARFF tactic are there, but a lot needs to be improved and optimized..

This report aims at giving you as a reader a basic knowledge in measurement techniques used in the road/land construction and witch instrument and methods that is commonly used. It also tries to shed light on the problem with unfinished or incomplete blueprints, which cause additional work performed by the surveyor. This report is written in collaboration with PEAB Umeå whom has given insight in their work.The goal of this report is to examine what kind of work surveyors has to perform on blueprints delivered by a technical consultant. The reader of this report gets a run-through of the different theoretical measurement techniques used today and a short explanation of different measuring instruments used by surveyors in their day to day work. Computer programs used in the field of construction are briefly explained, and some of the most common file extensions used, for example dwg and Land-xml.The report concludes in a questionnaire that was sent out to surveyors employed by PEAB.

Modern air battles are very dynamic and fast, and put extreme pressure on pilots. In some unpredictable situations, like new discovered threats or mission plan deviation because of enemy aircraft, the pilots might need to replan their predefined flight route. This is very difficult, if not impossible, to do since numerous factors affect it. A system that can help the pilots to do such a thing is needed. Previous work in this field has involved methods from artificial intelligence like A*-search.