SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

This report intends to analyze the difference between the original rules and a modification of the rules for the Scandinavian version of the world famous dice game yatzy (yahtzee). Several works are made previously existing strategies for yatzy and Yahtzee.The study was conducted using the optimal strategy calculated and implemented in the programming language Java. The execution of the application to create the file containing the optimal strategy was running on leased powerful servers from Amazon and took just over six hours each.A simulated player played 100,000 games based on the strategy, to obtain data which then was used to plot graphs and analyze the expected score and its standard deviation. The expected value (mean) and standard deviation of the score for the possibility of three or four throws were 233.00 ± 44.82 and 280.07 ± 41.25.In view of the results drawn the expected conclusion that the four possible throws provides increased probability of getting a high score, unlike the case where the player may only be able to throw the dice three times. The fact that the variance is lower in the case of four throw session is equivalent to that the likelihood to get close to the expected value increases..

This paper describes what some 9th grade students think of their sex education in school, especially when it comes to gender, sexual identity, norms and deviation. I have been using group interviews in two different schools, two groups per school. The result of the students' answers have been analysed on the basis of queer theory focusing on gender and sexual identity. The result of the study shows that the students consider their sexual education to be lacking, especially when it comes to gender, sexual identity, norms and deviation. Another conclusion of the analysis is that a sex education grounded in queer theory would be more inclusive..

En viktig del av den svenska välfärden är kommunens äldreomsorg för personer över 65 år, där Socialtjänstlagen ger rättighet till vårdboende och andra servicetjänster när det behövs. Kommunernas kommunaltjänst ska enligt Socialtjänstlagen vara av god kvalitet. Rapportering av avvikande händelser är en av hörnpelarna i arbetet med att förbättra kvalitet och säkerhet i vården. Avvikelserapportering bidrar till att undvika att negativa händelser upprepas, samt att rutiner förbättras för att höja kvalitet. Genom att ta tillvara möjligheterna med avvikelserapporter kan kvaliteten på vårdboenden förbättras och utvecklas.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Sustainability reporting in Sweden is a voluntary disclosure action for non-governmental companies. Since 2009 all state-owned companies must however publish a sustainability report according to GRI guidelines and with independent assurance statement. Three different sustainability reporting methods are primarily used: (1) Separate Sustainability Report, (2) Sustainability Report included in the Directors? Report, and (3) Sustainability Report forming part of the Printed Annual Report. The aim of this paper is to explore why some companies choose to publish a sustainability report and identify the motivational factors behind this decision, as well as attain an understanding for companies? choice of reporting method.

If P&C Insurance Company faces a challenge when their treasury system needs a new interface to a software as a service application. They need a suggestion for configuration for how the system and the application can work together. The work presented in this report is a suggestion for how you can make business configuration of an IT-based Treasury System in general. The exact configuration for the case received from If is presented as a separate report, found in Appendix A and is called the If-report. The If-report presents the suggested technical set-up of the configuration.

Social work is a profession where documentation about people?s behavior and life circumstances is common. In the beginning of the essay we ask ourselves, if these descriptions about people can be problematic? To explore this, we studied social documentation, from the past. We used a historical source because history can help usunderstand the social work that is being conducted today.

The Internet protocol of today has been used for over 20 years. A new version of the protocol has been developed to replace the old one. This is a direct result due to the explosive growth of the usage of the Internet. This follows by new demands which needs new solutions. This report brings up the old protocol IPv4, the new protocol IPv6 and shows what kind of changes that has been developed to meet the users demand.The report brings up two important aspects; internet security and mobility.

This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.