Involving prospective users in a development process is important. This makes it easier to make a more usable product. This thesis is about developing an intranet targeting a school and focus is aimed towards intranet usability.The reader is given knowledge into how to design and implement an intranet using persona. Design and develop by using persona is difficult when there is a group with large variety of knowledge, age and technology interest, so as in this case. Persona although always helps during the Development phase because of the strong links to the personas that are created, which gives developers a constant reminder of the end users of the system.The thesis describes how information is collected and processed.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

This report describes how we, with support from SYSteam Datakonsult AB Värnamobuilds a dynamic website for a fictional company. The purpose of this work is to tietogether our studies with the businesses in the region, and expand our knowledge.Together with Peter Bäckrud from SYSteam we worked out the goals to achieve thispurpose. The goals are to create a polished intranet to a company with the webpagepublishing tool EPIserverThis report begins with describing the goals and visions that were set up. Then follows athorough theoretical background that describes the areas we have touched, to give thereader an idea about the work. The report then moves into the creation phase that talksabout the problem that occurred during development.The creation phase is split up into two parts where the first part gives a good descriptionabout how we designed a usability friendly website that would fulfill the goals we had setup.

This work is a product development of a product which facilitates enduro drivers swallowing fluid while driving. My own experience of the problem and a custom survey gave me some frames and requirements of how such a product would look. To obtain the different concepts the method of brainstorming was used where I outlined the various proposals. The basic concept was that some kind of pump would build pressure in the liquid and when the user opens the nozzle the liquid will come out without the need to use the mouth to suck. The screening phase consisted of two steps.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

In this thesis, two real-time stereo methods have been implemented and evaluated. The first one is based on blockmatching and the second one is based on local phase. The goal was to be able to run the algorithms at real-time and examine which one is best. The blockmatching method performed better than the phase based method, both in speed and accuracy. SIMD operations (Single Instruction Multiple Data) have been used in the processor giving a speed boost by a factor of two..

AbstractThis study is about describing the pre- internationalization phase and to studycompanies that are in this phase. We are trying to capture characteristics of decisionmakersin the pre- internationalization phase, to then compare the theoretical materialwith empirical material from case companies. Then in the final stages of the thesis, wewant to account for if we managed to answer our research questions. In the method, wegive a description of the approach selected in conjunction with the study. The study isqualitative and we used both primary and secondary data, with a deductive approach.The theory chapter will consider the most relevant theories that are related to the topic,which is internationalization, pre-internationalization, international entrepreneurship,and the psychology behind personalities, attitudes, and how these can affect theorganization's strategic decisions.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

Quality is the main focus in management of all laboratories. Accurate results of the analyses are not only determined by the analytical procedure but also by preanalytical factors. In the total analytical process of clinical specimens, there are many possible preanalytical sources of error. Monetoring of temperature on test samples of the transport boxes is one way to reduce the mistakes in the preanalytical phase.In this study, four laboratories from primary health care were invited to participate. The temperature has been measured on test samples of the transport boxes being delivered to the laboratory.In three cases the temperature remained within the limits, but in the fourth case the temperature varied more than the allowed interval.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.

The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

AbstractThis study is about describing the pre- internationalization phase and to studycompanies that are in this phase. We are trying to capture characteristics of decisionmakersin the pre- internationalization phase, to then compare the theoretical materialwith empirical material from case companies. Then in the final stages of the thesis, wewant to account for if we managed to answer our research questions. In the method, wegive a description of the approach selected in conjunction with the study. The study isqualitative and we used both primary and secondary data, with a deductive approach.The theory chapter will consider the most relevant theories that are related to the topic,which is internationalization, pre-internationalization, international entrepreneurship,and the psychology behind personalities, attitudes, and how these can affect theorganization's strategic decisions.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.