Today´s debate in farming is being focused on tourism, outdoor life and hobbies in the rural areas. This is of interest also for the general public as a way of counteracting the depopulation of the rural areas. Within the last years, the farming has become more technically advanced and hence efficient. This has led to increased production volumes and wider selection of products with lower margins for the farmer as a consequence. When the profitability is reduced, the farmer is faced with the choice of either increasing efficiency or diversification of the business.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

 A villas price depends on several important factors. By statistical data, a mathematical multiple regression model was modeled. The model has important explanatory variables such as living space, renovation year and standard points has been taken into consideration, in order to assess their impact on the final price for private homes.By using a statistical program,Minitab 16, the final model was selected with eight explanatory variables. The regression for this model explains up to 67.3 % of the variation on the final price.The results showed percentage wise that the standard points had the greatest impact on the price, there after renovation year and then living space..

The purpose of this case study has been to investigate the development and implementation of metadataschemas in two swedish governmental agencies. The interest of metadata in relation to records managment has been significant lately due to the challenges posed by the digital environment. This has been manifesteted in international standards such as TS/ISO 23081 Metadata for records and the MoReq 2 metadata specification issued by the DLM-forum. The extent to which these standard has influenced practice seems less overt however which has been one main motivation for this study.   The research questions adressed are: What has been the main purposes for the development of the metadataschemas? Which standards and role-models have influenced the metadataschemas? How has the implementation of the schemas been carried out? The case study has been conducted using a qualitative research method.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

Background: To be better able to meet the new competition, companies are seeking new competitive advantages, wich is forcing them to review and, in time, change both working methods and corporate structures. This has led to an increased interest in the development of strategies within the field of Knowledge Management. Objective: The objective of this thesis is to improve understanding of how learning in a company occurs over internal boundaries and to investigate whether individuals need to be motivated in this regard. We also aim to give recommendations as to how this can be developed. Furthermore, we will work out a model that explains the learning process.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

To enable the enhancement of the driver's environment in a forklift, an alternative form of steering has been evaluated. An earlier concept with a combined driving and steering wheel has been exchanged to a concept with two driving wheels. A link wheel has replaced the combined driving and steering wheel. The steering is done through differentiation of the velocities of the two driving wheels. The scope of this master thesis is to create a simulation model, create a control program and to evaluate the concept of two driving wheels.

This thesis is about sustainability within chemistry, the so-called, green chemistry. With this work  I seek to combine green chemistry with sustainable  development  and find methods for teaching green chemistry in a laboratory environement.  I have designed  and tested two labs with ingredients of green  chemistry and sustainable development in my study. I wanted to determine if my design model  leads to conception for the students. The students have through forms and interviews declared their perspective on the education and their conception. In a laboratory environment the pros of a laboratory way of work should be recognized.

Objective: To investigate the experiences of ambulance nurses when using Boussignac CPAPcompared to their previous model, and their suggestions for possible improvements in the use of CPAP in the care of patients with pulmonary oedema. Method: A qualitative study with a descriptive and exploratory approach. Data was collected through ten semi-structured interviews with ambulance nurses, seven men and three women. The analysis was conducted using Lundman and Graneheim?s content analysis.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

The development in electronics increases the demand for good design methods and design tools in the field of electrical engeneering. To improve their design methods Ericsson Microwave Systems AB is interested in using computer tools to create a link between the specification and the implementation of a digital system in a FPGA. Xilinx System Generator for DSP is a tool for implementing a model of a digital signalprocessing algorithm in a Xilinx FPGA. To evaluate Xilinx System Generator two testcases has been designed. The testcases are selected to represent the FPGA designs made at Ericsson Microwave Systems.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.