Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

The use of silicon carbide (SiC) as a base material in power electronics has manyadvantages, including high breakdown voltage and excellent temperature endurance.However, the packaging of such electronics presents major challenges and there is aneed for packaging that can operate in higher temperature. The purpose of this thesishas been to develop a test method and verify the functionality of SiC powertransistors prototypes with a new packaging technique developed by Swerea IVF AB.It includes setting up an electrical test-bed for power and high temperature cyclingand analysis of the results. Even though test confirmed functionality after thepackaging process, (at room temperature) the performance seemed to have been reduced. This could be a result of the measurement setup and the packaging process.In higher temperature the transistors failed to operate longer than a couple ofminutes which showed the weaknesses in the design and the challenges with this typeof packaging..

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Styr is a computer program that the construction company NCC use in their construction projects. The program is used to keep the economy of their projects in a good order and things for the best in an early phase. The problem is a low extent of utilization. During the latest decade NCC has put a lot of job and money trying to develop the program. The question is how to get the employees to use the program in a greater extent.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

Speedledger is a company that is working to automate electronic accounting for businesses, organizations and associations.In the current situation bank data is sent from the users internet bank to Speedledger via a virtual printer driver. The driver transforms the web page into a PDF and sends it to a server for interpretation.The problem is that PDF is not created for this sort of data transfer and makes the interpretation of data is very problematic.The goal of the thesis is to study whether there is a possibility to develop a browser add-on that can retrieve information on the customer's banking page and send it on to Speedledgers server for interpretation. My task was to implement a add-on for one of the three major browsers Mozilla Firefox, Google Chrome or Microsoft Internet Explorer, and then study the possibility of implementing it to the other two by reading the documentation.What I concluded was that it is possible to implement for all the three browsers. However, the techniques will differ slightly when developing these add-ons.  .

Nurses have an important role caring with the suicidal patient as they often are the first to encounter these individuals. In order to develop their skills, nurses need to understand the complexity of the problem around the thoughts of wanting to die. The purpose of the study was to compile and elucidate research that describes how nurses can provide care to suicidal patients. The method used was a literature review. The results were divided into seven themes that can guide the nurse in the work: to be there, give time and listen, to recognize and assess risk factors, working in a team, to be attentive to own attitudes, to give hope, to be able to process their feelings, increased knowledge of the causes of suicide.

The purpose of this study has been to look how pedagogic process interacts in horse riding lessons. In order to research this problem I have used an ethnographic approach and during a week I observed ten riding lessons in two separate Riding house in the south of Sweden. In my theoretical frame I have used Michel Foucault ?Discipline and punish? as a toll to make clear how dominance and submission is present and active in the horse riding education. The conclusion shows how dominant power rules by its presence and creates submission, stability and feeling of security. The discipline is used to create a feeling that will bring the riders to new experience and develop their talent.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

A pilot-study was used to investigate, types of assistance, assessed needs, outcomes and effects of special-needs assistance given to a subsample of compulsory school pupils in an effort to develop an evaluation strategy for identifying educational impacts of specific special-needs inputs.  Preliminary results indicate a tendency for postive outcomes for most pupils in the pilot group (n = 11) but also that many pupils have residual difficulties.  Pupils with residual difficulties mostly required special education asssitance with Maths, English or Swedish.  More pupils also needed support with behavioral difficulties.  More research and an expanding knowledge base is required in order to effectively evaluate outcomes of teacher support.  Schools need help in devising different methods of assistance and particularly for pupils with behavioral difficulties..

At the department of Electronic Warfare Assessments at the Swedish Defence Research Agency in Linköping one of the activities is modelling and simulation of the duel between a robot and a target. The aim with this Master's thesis is to develop a simulation model of an hovering helicopter. First a theoretical description of the forces and moments acting on an helicopter is given. Then the equations of motion are derived. These equations are simplified to be valid only for a hovering helicopter and the result is a mathematical model.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

The purpose of this essay has been to investigate the research and national initiatives regarding film and Cineliteracy in the Swedish curriculum.The results show that, after all research, national initiatives and the continual clarification from the Swedish National Agency for Education concerning film's place in the Swedish subject, the vision of students cineliteracy not at all obtain an obvious place in the curriculum.The research points out the main causes behind this result to be teachers' lack of expertise and the fact that the formal education for future teachers in the subject still upholds traditional views on the subject of Swedish.The initiative presented in this essay also show lack of continuity, lack of adequate professional development opportunities for teachers and lack of practical guidance manuals to help teachers to develop and educate their pupils in line with current research and visions. .

This work is about how teachers describe their work with mathematics in a traditional nursery school and a Montessori preschool. Another aim is to study how children mathematise on the two different preschools and to see if there are any differences between the various educational theories and practices mathematising. I have used two methods wich is interviews with preschool teachers, and observation of the children. The results of my study was that differences exist but the biggest difference is the material that Montessori uses. The difference between the teachers' way of teaching mathematics is to Montessori preschool places great emphasis on the material and how it is used, while in the traditional preschool puts the emphasis on learning through interaction with others.