The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

This Master?s thesis examines different retrieval strategies used in cross-language information retrieval (CLIR). The aim was to investigate if there were any differences between baseline queries and translated queries in retrieval effectiveness; how the retrieval effectiveness was affected by query structuring and if the results differed between different languages. The languages used in this study were Swedish, English and Finnish. 30 topics from the TrecUta collection were translated into Swedish and Finnish.

Multichannel-shopping has become a wide spread phenomenon in the retail industry due to a significant development of retail channels and formats. Consumers now shop for the same product category in many different retail settings and this trend is increasing. Therefore both the academic world and the retail industry are screaming for knowledge about the multichannel-shoppers. Several studies have focused on the characteristics of different channels and how multichannel strategies should be designed to minimize cannibalization. There is however a lack of research concerning what characterizes multichannel-shoppers and what drives them to shop in several channels.

The general aim of this paper is to describe how the European Union can affect and transfer their conditionality politics to the Western Balkan countries. A specific purpose of this study is to describe and explain what we in this paper consider to be a specific additional membership criterion, regional cooperation that has been especially designed for this region. The point of departure for this paper is Europeanization theory that will be used to study the European Union?s impact on non EU-members in Europe. The theoretical Europeanization mechanisms are taken from Heather Grabbes ?Europeanization model?.

This cross-sectional study investigated the use of health benefits in relation to the self-rated health of employees at two medium-sized industrial enterprises in Hälsingland. The method used to investigate this was through a self-designed questionnaire consisting 19 questions about health, lifestyle and health benefits at the workplace. A total of 100 questionnaires were distributed in the two companies, hence 50 surveys at each workplace. The response rate was measured to 88 % and 74 %, which means a loss of 6 persons and 13 persons. The results showed that Company nr 1 offers its employees a health benefits consisting of free access to gym in the company premises after working hours and financial contributions to training-cards.

This thesis concerns how local governments use the concept sustainable development, and what the concept means. The concept of Agenda 21 and local Agenda 21 will also be discussed in this essay, because it's an instrument for local governments to specify their work towards sustainable development. I have interviewed civil servants in leading positions in the municipalities? work with environmental questions and sustainable development. In the choice of method for this thesis, I use the qualitative method and for the interviews I chose the ?semi structure way of interviewing?.This thesis shows that local governments? implementation of sustainable development and Agenda 21 differ between the municipalities.

The purpose of this paper is to analyze the employers? responsibilities for rehabilitation ofemployees in Sweden, who due to illness or injury are unable to work. The process of therehabilitation will be analyzed in a gender perspective. A minor comparative study aboutrehabilitation in Denmark will also be carried out. The purpose is to see how the process ofthe rehabilitation is designed for those who due to illness or injury are unable to work, whichfactors that affects the rehabilitation and which differences there are between Denmark andSweden regarding the employers responibility for rehabilitation.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

Abstract 1.The purpose of this study was to investigate the effects whole body vibrations on maximal strength, power output and neuromuscular activity in m. pectoralis major during bench press.Participants consisted of 35 male and 9 female military high school students (m=23, 1 years). On the basis of initial maximal performances in bench press the participants was divided into two experiments groups and one control group. Intervention groups performed a specifically designed push up program on a vibrating plate respectively a step board during 12 weeks Initial load at 60 % of 1 RM showed an average of 46, 5 kg. All groups showed an average increase of 13 kg for each person after 12 weeks.

This thesis aims at exploring a national collaborative gateway-service, PictureAustralia, hosted at the National Library of Australia. This will be done by means of investigating some underlying principles for descriptive standards and conventions as of the library discourse which is the objective of bibliographic control and access. The reason to do this is to bring some main features of these principles into the context of a cross-institutional cooperation between libraries, galleries/museums and archives in a picture database service. The attention will lay on the objectives of what functions the system is designed to perform to give access, as defined by Elaine Svenonius in the Intellectual Foundations of Information Organization 2000, and how these objectives will affect this particular database-service collocating performance, which is a system- and logical approach. Though, this study will be done in an explorative and qualitative way, by a case-study, which is to examine some sample metadata records emanated from different institutions in this project.

When the Eolshällproject was completed for the first time, a great deal of moisturedamage was discovered. Therefore the structure completion was removed andreinstalled. The project was originally planned to cost a total of 126 million SEK, but thefinal costs landed on 271 million SEK. What caused this failure? Were the designs poor,was the technology used too advanced, or was the project not managed properly?Based on the Eolshällproject, theses will be presented about what may have caused themoisture damage.

This thesis is about making a support for barcode readers and RFID readers on a computermounted in heavy vehicles. The computer has several applications designed for heavyvehicles such as an order handling application. The goal was to suggest an architecture toimplement a support for the readers. The architecture should be independent of whichmanufacturer who has made the reader hardware that was connected to the computer.At first a theoretically study was made around RFID technology and standards for thetransport and supply sector. Then the architecture was developed and a demo implementationwas made.The conclusion of this thesis is to implement support for barcode readers with a wedgeapplication.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.