This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

I denna rapport redovisas arbetsgången för produktutvecklingen av ett rullstolsunderrede med nya design- och konstruktionslösningar. Det slutliga konceptet är ett underrede med två centrala konstruktionslösningar; en hydraulcylinder som medger vertikal sitthöjdsjustering, samt en vaggfunktion i sittplattan som medger ökad balans vid vinkeljustering. Samtliga funktioner på underredet har anpassats för att erbjuda ett enklare och renare ramverk..

Denna C-uppsats är ett resultat av ett examensarbete som fokuserat på design som är kritisk till industrins agenda för att producera en produkt. Den är kritiskt till produktdesignerns roll som bunden till att leverera vad marknaden säger sig önska. Den är också kritisk till produktdesignerns modus operandi, att om designfältstudier utförs, finns redan beslutet att något ska produceras ? inte tvärt om. Uppsatsen korrelerar en marknad i överflöd med ökad stress på arbetsplatsen.

This essay describes a single case self-study of a music composer in order to track the compositional process in real time. In the study the subject and the researcher are the same person. The study builds on previous empirical studies that have used methodological approaches such as analysis of computer-based digital data collection, verbal protocol and video observations. It deals with issues of the compositional process related to for example time consumption, number of artistic decisions, the different roles and skills of a music composer, and methods of research in the musical composition process. During three shifts the researcher worked as a music composer dealing with the issue of converting an audio sketch of a composition into a representative finished audio product.

The purpose of this paper is to create an understanding of the negotiation process behind the decision of who will stay at home with a sick child and to develop the knowledge of the mechanisms considered to affect the negotiation process, in particular, the mechanisms likely to contribute to an uneven use of care leave. In the study six interviews were conducted with three sets of parents. These interviews were then analysed with Janet Finch?s (1989) definition of negotiation of family responsibilities. The study finds that the negotiation on care leave is a result of the negotiation of the shared view of reality.

How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible. Conclusion: We state that IT-consultants do not use any theory-based methods, they use process methods created by themselves and their company.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

This case study, ?The sense of place in a courtyard in Gothenburg?, examines whether the city planners? vision correspond to the residents? perception regarding the sense of place and the physical environment in a courtyard in Gothenburg. By carrying out a questionnaire survey, the inhabitants? perception has been explicated, which we have then compared to the total vision for the design of the courtyard that we have gathered from doing interviews with the planning executive, the developer and the landscape architect as well as reviewing the development plan. The study has shown that the vision coincides relatively well with the residents? perception, but it differenciates when it comes to social aspects.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

This is a thesis on D-level. In a previous course, at our program Computer Science, we came up with an idea of how to improve/complement training for new employees who are situated in a stressful workplace at companies who are in a constant need of rehiring. We developed this concept and came up with an idea for a simulator that could train staff as well as relieve stress and tension for new employees. The idea matured and became a Serious Game simulator based on a dual-wield Wii-controlled PC-based simulator with Bluetooth support.The purpose of this paper is to produce a design concept for a simulator as well as conducting research on the topics: mental and physical learning abilities, psychomotor abilities, visual perception, hand-eye coordination, confidence, simulators and Serious Games. The conducted research will be the foundation for the design concept which will be implemented in our co-workers', Henrik Djerf & Daniel Gomez-Ortega, prototype.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

Denna rapport omfattar skapandet av en träningsmiljö tänkt att placeras utomhus i Karlstad och är anpassad för rullstolsburna individer. Arbetet har utförts på uppdrag av Karlstad kommun och motsvarar som ett examensarbete för högskoleingenjörsexamen inom Innovationsteknik och Design, vid fakulteten för Hälsa, Natur och Teknikvetenskap. Arbetet har utförts vid Karlstad Universitet under våren 2014.Karlstad kommun har sett ett behov av träningsutrustning i utomhusmiljö tillgängligt för rullstolsburna. På många träningsplatser i dagsläget stängs rullstolsburna ute från träning då det finns få möjligheter att justera den utrustning som erbjuds. Ur ett användarperspektiv anses träningsmöjligheterna vara otillräckliga vilket har legat till grund för detta arbete.Utfrån uppdragsgivarens synpunkt och krav samt genom informationsinsamling, intervjuer och obervationer formulerades en produktspecifikation.

The purpose of the project was to design an electric bicycle to offer thetarget group youth an attractive alternative to mopeds. The basis for theproject was user studies in which young people were interviewed andobserved in their daily environment.The project resulted in a product, designed with the focus of integratingthe battery to the shape, to create a wholeness that is simple andintuitive.!The product is easy to use and operate, with an automatic transmissionengine.! A smart modular system allows the user to choose design withmudguards, rear rack, or without. The battery design is based on "cradleto-cradle" to maximize the battery life and minimize environmentalimpacts.It was very fun and rewarding to have the opportunity to present theresults for the youth who showed great interest in the product.The project was conducted in collaboration with Designit and Cycleurope..

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

?Service Design? har på senare tid fått innebörden att utveckla tjänster med hjälp av designmetodik. Syftet med denna uppsats har varit att kartlägga nuvarande synsätt inom området för att få inblick i hur ?Service Design? kan användas i innovations- och utvecklingsprocesser hos svenska tjänsteföretag. En övergripande genomgång av litteraturen kring området ?Service Design? har gjorts.