The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

The Landscape Architecture Program at SLU, Ultuna provide several design courses. Within these courses, students are mainly introduced to one type of design process, a process based on the specific site and its conditions, known as Genius Loci. This report presents a course and a design methodology from Cornell University which aims to provide students with tools for a more conceptual way of thinking about design and architecture. The design method is presented in two stages. First an introduction to the course description and objectives.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Many design agencies and designers like to see design as a longtime strategic investment for any company. However, knowledge of design as a strategic resource depends on ones professional background and ones knowledge of design as such. It is common today that clients meet design agencies and therefore design with a certain skepticism concerning its role in the company. Within the prodctdevelopment-process the company?s different functions meet.

The high level of competition and the rapidly growing technology development has created new challenges for today's businesses where they are forced to deliver more customized products at a lower price and a shorter time period. This places high demands on the companies' ability to design and develop better products in a more efficient way. In addition to developing products, the design process focuses on securing long-term success for the company by developing nourishing skills. However, to achieve an effective design process the companies must improve their ability to plan as well as use their knowledge base in a more efficient manner. Toyota's product development system is a critical component for companies to address challenges that they?re facing and offers a great potential to create significant competitive advantages.

Denna rapport redovisar för design- och utvecklingsprocessen i byggandet av en responsiv webbsida. Webbsidan skapades för användning av den blivande spelstudion Rocket Luncher Studios. Wordpress som CMS (Content Management System) har används som innehålls-hanteringssystem för att förenkla uppdatering av webbsidan av uppdragsgivaren själva. Webbsidan är kodad utifrån Luke Wroblewskis ?mobile-first?-tänk, vilket börjar med att fokusera designen på mindre skärmar för att sedan anpassa innehållet mot större skärmstorlekar.

The main objective of this thesis was to develop appropriate strategies and find factors that affect the usability of parameterized designs. This was accomplished by investigate the user-interface and how it is designed to meet the user's information needs. The thesis also embraces the basic theories in terms of investigation, cognitive design principles and human behavior patterns in the interaction with the machine. The approach has led to an explorative investigation in this subject area.The thesis also had the purpose to achieve more efficient ways for development of motor chainsaws at Husqvarna AB's department Global Cutting Equipment. That can be achieved through reduce costs of development per sold unit.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

Starting out as a minor form of amusement, the game industry has become one of the most lucrative andsuccessful in the entertainment business competing against giants such as television, movies and music.As the internal competition within the developer community grows companies work hard at discoveringnew ways to attract and keep customers. By having a playcentric approach focusing on user experiencethey hope to achieve that goal. This thesis describes the process of designing a game with focus on theplayer. We apply the concept of flow on game development and investigate through research throughdesign if we are able to create a game that keeps the player in flow.Play tests showed several elements such as control issues and too difficult challenges early in the game,affecting the possibility for players to experience flow while playing. These negative factors came to becalled flowleakers.

Ipendo Systems in Linköping, Sweden, is a small IT consulting firm developing among other things custom portal applications based on Microsoft Sharepoint 2010. The purpose of this thesis is to investigate whether the test tools TestComplete and LoadComplete provide sufficient compatibility for functional and non-functional testing of Ipendo Systems? Sharepoint based applications, as well as design testing related activities to be incorporated into their existing software development framework. A test process maturity framework was chosen and applied for the design of the testing activities, while the test tool investigation resulted in guidelines on how to apply the tools effectively and circumvent any issues discovered..

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

This Master?s Thesis work was performed at the Studio Engineer department at Volvo CarsDesign Centre in Gothenburg, Sweden. The assignment has been to create a new idea of an airvent where the news value mainly was focused at functionality but also with great attention onvisual appearance.The work has been totally independent and not been aimed to any specific car model. Theindependency initially made that the visual appearance primary wasn?t limited in any way dueto surrounding components.