The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

Today´s debate in farming is being focused on tourism, outdoor life and hobbies in the rural areas. This is of interest also for the general public as a way of counteracting the depopulation of the rural areas. Within the last years, the farming has become more technically advanced and hence efficient. This has led to increased production volumes and wider selection of products with lower margins for the farmer as a consequence. When the profitability is reduced, the farmer is faced with the choice of either increasing efficiency or diversification of the business.

During the last two decades, technology has developed rapidly. It has become a natural part of everyday life, which we today take for granted. It isn?t until the last few years that technology has quickly become a big part in the school environments. Computers, tablets and other technology is today a big part of the education and teaching.

In this thesis I investigate aesthetic preference for picture books among children aged 3?6 as well as criteria for preference among parents. Through my design project: illustration of a picture book, I aim to put my research on preference in the context of illustration and design. By using the design project as an applied method for research I have sought to answer how one as an illustrator can apply knowledge regarding preferences of the target groups when illustrating for picture books. I have primarily based my research within the field of cognitive developmental psychology, with primary focus on stage theory, and the field of literature.

The purpose of this case study has been to investigate the development and implementation of metadataschemas in two swedish governmental agencies. The interest of metadata in relation to records managment has been significant lately due to the challenges posed by the digital environment. This has been manifesteted in international standards such as TS/ISO 23081 Metadata for records and the MoReq 2 metadata specification issued by the DLM-forum. The extent to which these standard has influenced practice seems less overt however which has been one main motivation for this study.   The research questions adressed are: What has been the main purposes for the development of the metadataschemas? Which standards and role-models have influenced the metadataschemas? How has the implementation of the schemas been carried out? The case study has been conducted using a qualitative research method.

Användandet av enheter med varierande skärmstorlek för att surfa på webbsidor ökar. Webben är således under en ständig förändring. Ansvariga för en webbsida måste därmed bestämma hur de ökade kraven som dessa olika enheter ställer ska kunna tillgodoses. Genom att använda sig av HTML5, CSS3 samt Responsive Web Design kan en webbsidas design på ett önskvärt sätt anpassas efter enhetens skärmstorlek. Denna uppsats syftar till att ge riktlinjer för att förenkla den migrationsprocess som en designer av en webbsida förr eller senare måste ta ställning till för att kunna hantera olika enheters skärmstorlekar.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Hjälp snabbt och enkelt på distans..

Cittaslow is an international organization founded in Italy in 1999 by a few towns in Northern Italy, in order to stop the trend of people moving to bigger cities. The aim was to show the advantages of small towns and to strengthen their identities. Falköping is, since the certification in the summer 2008, the first Cittaslow in Sweden. Cittaslow is an international organization founded in Italy in 1999 by a few towns in Northern Italy, in order to stop the trend of people moving to bigger cities. The aim was to show the advantages of small towns and to strengthen their identities.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

This study concerns design thinking and how to achieve usability when designing applicationsfor smart watches. The study's focus is on interaction and design for online auctionapplications such as Ebay and Tradera. After studying usability and design for devices withsmall screens, guidelines and design principles for interactive systems, we developed apaperprototype for an auction application. The prototype was used for testing our intervieweeswhile observing and asking questions. After collecting the data we analyzed the responses andfeedback on our prototype and combined the results to previous studies.

This master thesis examines the development of the two earlier independent IR protocols Z39.50 and SR (Search and Retrieve, ISO 10162/10163), now Z39.50/SR, from the beginning of the 80s to 1996 and their functionality in the client/server environment.Z39.50 applications in library systems will allow easy access to information regardless of platform or location. The use of Z39.50 will create a new user environment. Almost all the library systems of the market support the Z39.50 and surprisingly the use of it in Sweden lied on a very low leve! in 1996. This thesis was followed-up by an interview and a questioner among the Swedish Z39.50 users. They could see a huge potential of development concerning the future IR process.

The object of the thesis is to propose a new lighting plan for the square Fyristorg in Uppsala, and to describe the process which have led to it. It all started when I choosed the place together with the municipality of Uppsala. I have been doing research and analyzed how the place and it´s existing lighting works both during different times of the day and also in the evening. After researching the place and it´s existing lighting I´ve decided to put up the following goals fot the new lighting design. 1. The general light level of the place shall be experienced as higher than today. 2. The light level of the place shall be adapted to the light levels of surrounding places. 3. The lighting shall be free from glare. 4. The lighting shall be adapted to people passing by. 5.The lighting shall be adapted to the surrounding architecture. 6.