In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

Background: Increasing globalization has changed the business environment and also resulted in increased awareness of the consumers and demand for higher standards of social responsibility. The companies brand strategies has gain in importance in order to strengthen their brands. A part of a company's CSR, CRM, cause-related marketing, which is a relatively new marketing strategy and created when companies choose to partner with charities and market it. Garment/clothing industry has as many others come to be shaped by the effects of globalization, but has also endured heavy criticism over the years. This criticism is largely because of the outside world's reaction to the exploitation of developing countries.

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

Filtermaterial av 75 % torv och 25 % kolaska har använts under 2 respektive 4 år för rening av avloppsvatten från två biltvättar. Jämförelse med Kristianstads kommuns riktvärden för avloppsvatten från fordonstvättar visar att filtren fungerat. För avfallsklassning krävs kunskap om innehåll av miljöfarliga ämnen i produkter som använts i tvätthallarna. I brist på kunskap om innehåll av ej analyserade miljöfarliga ämnen i filtren anses förbränning vara ett bra omhändertagande ur miljösynpunkt, då energi och aska återvinns..

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

This essay examines the recent electoral success of the Sweden Democrats (SD) in the Swedish municipal election in 2006 and 2010. By using statistical methods it aims to explain which of three contradicting theoretical frameworks best can explain how a populist radical right party could penetrate one of the most stable party systems in the world. The theoretical approaches tested in this essay are: a demand-side, an external supply-side and an internal supply-side approach. By using theoretically anchored proxies to determine the effect of the contradicting theoretical approaches this essay concludes that the internal supply-side explanation measuring the local party organizational ability of the SD had the most substantial effect when it comes to explaining their recent electoral success in the Swedish municipalities, as opposed to a more commonly believed demand-side driven explanation..

The popularity of vegetated, or green roofs, has grown over the past years due to their potential function of maintaining urban environment quality. The aim of this study was to investigate if substrates with different organic material, peat and charcoal, with two contents (3 or 6 weight%) influenced the growth of the cuttings during the first critical period of the establishment. Biochar is used as amendment to agricultural soils and has, theoretically, many of the properties suitable as organic content in green roof-substrates. Peat is one of the materials that is commercially used in green roof industry. The substrate has been treated with different amounts of water.

Älvkarleby, landscape character and design proposal is a Graduated Thesis (30 ECCcredtis), in the subject of landscape planning at the Swedish University of Agricultural Sciences, the Department of Rural and Urban Development. This thesis is a study and implement of the method "Landscape Character Assessment" (LCA), developed in England and Scotland as tool to analyse and highlight the landscape in different planning processes. The purpose of LCA is to increase the understanding and strengthen the role of the landscape. The thesis consists of three main parts: landscape characterization, guidelines and a design proposal. The landscape characterization emphasizes the values of the landscape in different types of planning processes, a documentation to base estimations on in any kind of change in the area. Theese estimations have resulted in guidelines that give proposals to the development of the landcape, focusing at the desingproposal.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

The mining industry, in terms of ore excavation and metal production, is and has been important to the Swedish economy. In connection with the ore excavation process, large amounts of partly sulphidic waste are produced. When the metal sulphides are exposed to air and water they are eventually oxidised, which leads to the formation of acidic water with high concentrations of metal cations and sulphate ions, so called Acid Mine Drainage (AMD). This water may reach the nearest surroundings and cause negative environmental effects. By covering the waste with soil or water, the oxidation process can be minimised. At the Rävlidmyran mine in the county of Västerbotten open pit mining took place between 1951 and 1991.