A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

The purpose of the project was to design an electric bicycle to offer thetarget group youth an attractive alternative to mopeds. The basis for theproject was user studies in which young people were interviewed andobserved in their daily environment.The project resulted in a product, designed with the focus of integratingthe battery to the shape, to create a wholeness that is simple andintuitive.!The product is easy to use and operate, with an automatic transmissionengine.! A smart modular system allows the user to choose design withmudguards, rear rack, or without. The battery design is based on "cradleto-cradle" to maximize the battery life and minimize environmentalimpacts.It was very fun and rewarding to have the opportunity to present theresults for the youth who showed great interest in the product.The project was conducted in collaboration with Designit and Cycleurope..

According to the health care law and the national care guarantee, all individuals with mental illness have the right to good health care that is knowledge based as well as to rehabilitation where and when they need it. They also should be able to choose and have control over who is performing the care, including the design of these efforts. The purpose of this study is to investigate patients' experiences of general psychiatric emergency care and the cooperation between outpatient care, inpatient care and the municipality. This study is a descriptive cross-sectional study, conducted with a quantitative and qualitative method. The study is performed in collaboration with Akademiska Sjukhuset and is part of a larger quality improvement project.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

?Service Design? har på senare tid fått innebörden att utveckla tjänster med hjälp av designmetodik. Syftet med denna uppsats har varit att kartlägga nuvarande synsätt inom området för att få inblick i hur ?Service Design? kan användas i innovations- och utvecklingsprocesser hos svenska tjänsteföretag. En övergripande genomgång av litteraturen kring området ?Service Design? har gjorts.

This bachelor?s thesis is a study that examines cactus groups in Sweden from a heritage conservation perspective. Through interviews and an analysis of both historical and modern literature, the research explores why cactus groups became popular and what is required to preserve those still in existence today. A recurring challenge has been the lack of comprehensive source material, leaving some questions open for further research. The study focuses on four cities?Norrk?ping, Skellefte?, Varberg, and V?xj??that have maintained their cactus groups for nearly a century.

Between 1965 and 1974, the Swedish Parliament decided to build one million dwellings, called Million Program. The million program buildings were erected with new, untried design solutions, in a short range of time, and at low cost. The residential buildings from that time are now greatly in need of renovation. The municipal housing company, Gavlega?rdarna, renovates and improves the energy efficiency at some of it?s apartment buildings in the district Sa?tra, Ga?vle.

I denna rapport redovisas ett examensarbete av Edvin Sjöberg utfört i samarbete med Ödins Garveri i Visby.Projektets mål har varit att ta fram ett tillverkningsunderlag för en ny axelremsväska i läder för män. Väskan är konstruerad för att vara materialbesparande, hållbar och elegant.Faktainsamlingen ger en översikt av de vanligaste sätten att bereda och garva skinn, sömnadsteknik och tillverkningsteknik. Målgrupps- och marknadsanalys har varit vägledande för utformningen av slutprodukten och stort fokus har lagts på modell- och skissarbete.Slutprodukten är en herrväska med mycket hög materialkvalité, formgivning inspirerad av klassiskt herrmode och med väl planlagda och genomtänka detaljer..

Companys usually have intern communication platforms where employees can gather information and communicate with eachother. These networks are not public which leads to less resources spent on development. If this network is also used as a work tool may inadequate usability decrease work effeciency. Thats why we, by using known design principles, evaluated an already existing network of this kind along with interviews and think out loud tasks for users. Four users had to do some tasks while they explained how they went through step by step to solve those. This report culminates into a couple of guidelines which can be used to create a user friendly network. The problems that prevented users to feel in control when working resulted in the following guidelines: Create shortcuts of frequently used functions.

The purpose of this essay is to study the public debate on the subject of creationism, the belief that there is a creator of all life on earth. The study is focused on creationism in different forms in schools and the more general discussion of creationism as an alternative to the theory of evolution. The overall question is what should be taught as the origin of life: Evolution or creationism in various shapes and forms? The essay consists of an overview of previous research in both the USA and Sweden, and an analysis of argumentation on the issue in newspapers. A comparison is made between the USA and Sweden.The analysis of newspapers shows that there are some arguments for different forms of creationism but there are considerably more arguments against creationism.

Train travel has increased in Sweden, and future increase of train transports putdemands on the already vastly exploited railroad net. The increased need of capacitycan be seen in the ongoing and planned expansions of the railway track. One part ofthe railroad infrastructure which is affected by an increase of travellers is the design ofthe station platform. Since the platform is the place where the traveller meets thetrain, dangerous situations can occur in this environment. A number of studies focuson single safety risks, albeit there is no research to show the full picture of safety inthe platform environment.This study aims to treat and put together a compilation of risks for the traveller in theplatform environment in the form of a checklist, which can be used as support inplanning and design of a safer platform environment for existing or planned platforms.The thesis has, through case studies of five ongoing projects within the NationalRailroad Administration (Banverket), interviews with train company personnel andinternational railroad administrators, identified and treated safety (and security) risksin the platform environment.The conclusion of the study is that the relations between the traveller, the physicalplatform environment and the project organisation are important to explore andexploit when designing effective safety measures.

Design Thinking är ett spännande och fortfarande relativt outforskat område med rötter i Service Management. Med hjälp av designerns verktyg och metoder och en mångvetenskaplig grund med fokus på kundens behov kan Design Thinking bidra till att utveckla produkter och tjänster och genom detta öka lönsamheten för företag. Syftet är att göra en deskriptiv studie av området Design Thinking som metodiskt arbetssätt vid tjänsteutveckling. Detta appliceras sedan på verkligheten för att komparativt se hur tre svenska bolag arbetar med tjänstutveckling inom en av världens största tjänstebranscher utifrån områdena Service Management och Design Thinking. Uppsatsen beskriver utvecklingen från Service Management till Design Thinking och hur man har gått från att utveckla tjänster till att designa tjänster.

The purpose of this study is to create a deeper understanding of how Swedish universities work with their marketing communication aimed at potential domestic students. The study focuses on how universities design and select channels for the marketing communication. A case study was conducted where four respondents from two Swedish universities were interviewed in order to generate empirical data. The results show that key factors for marketing communication are uniformity, honesty and trustworthiness. The results suggest that marketing communication should focus on the student?s experiences of university life and being a student, rather than marketing the university?s core service: education.

North Western Kungsholmen in Stockholm is confronting big changes and Stockholmsstad is planning that the area will be an extended part of the existing structure in centralStockholm. Dwellings and offi ces are built and the population increase heavily. Th isresult in a need to look at how public green areas can develop and be designed. Th epurpose is to design a proposal for a master plan of S:t Göranområdets public greenareas. Exploateringskontoret, Stockholm stad, who has initialized the task, claim thatthere is a need of clarifying and shield the qualities in the green areas of today and howto create new green structure.The problem formulations which are current in this master thesis are:? Is there a need of a distinct identity for the green areas of S:t Göransområdet? If so,how is this created?? How can the green parks and nature areas inside S:t Göransområdet be improved anddevelop?? How can the connections between the green areas inside S:t Göransområdet beclarifi ed and how can they connect to the surroundings?To get inspiration and information for the design this thesis include a study of theincluding parts in the design process.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.