The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

Usability is a field within systems development which doesn?t get the attention it might deserve. Above all, it?s considered time consuming and expensive by many people in the industry. The current information regarding low-cost alternatives to achieve a more usable system seems to be almost non-existent.

This study is an evaluation of the runtime watch function in a OEE software, knownas ProTAK. OEE stands for Overall Equipment Effectiveness, it?s a way to measurethe factories process efficiency. The runtimewatch function allows the user to setup and monitor certain critical objects that are of importance for the pulp and paper process at the mill. The data from the runtimewatch can be correlated towards the suppliers specification for the components.

The vertical electronic excitation energies for the narrow-bandgap polymers LBPF, EP37 and EP62 have been calculated using Density Functional Theory (DFT). Also the vertical excitation energies for the acceptor unit of LBPF have been calculated using the Hartree-Fock (HF), DFT and Coupled Cluster (CC) methods. The calculations cover the visible and infrared wave length region and two strong transitions are obtained, one corresponding to the pi to pi* transition and one corresponding to the pi to Acceptor transition. The excitation energies obtained from DFT are below the corresponding experimental results and attempts have therefore been made to perform bench-marking calculations using a hierarchy of CC methods..

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

In today?s competitive market, design is an important element for the companies. They must succeed with delivering an increased value and an experience for the consumer to be able to survive. The Swedish company?s have become better in the design area, the higher standards the consumer?s demands forces the company to invest more in design.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22,5 hp, 2014.

Scania InfoMate develops web applications that support truck distributors and workshops with the necessary tools for an effective maintenance process. However, the end-users of these applications are faced with as many different graphical interfaces as there are applications. As a consequence, important effects of recognition are lost, developers spend unnecessary time designing new solutions for each application and Scania InfoMate does not present a homogeneous brand image towards its customers.Therefore the aim of this study is to give a suggestion of how a standardized graphical interface for web applications at Scania InfoMate should be designed. The given suggestion should come from thorough investigation of both end-user needs and recent research within the area of usability. In addition to a standardized interface this study also aims to deliver guidelines that support future web application development at Scania InfoMate.Through a combination of methods, mainly heuristic evaluation and user interviews, an elaborate description of usability and consistency problems in a defined web application portfolio is produced.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose of the study was to examine what methods and strategies individuals use to maintain their weight loss. Another aim was to explore which factors can complicate or simplify weight loss maintenance. Fifty-four individuals who had maintained their weight loss more than a year, participated by answering a questionnaire. The questionnaire was constructed and distributed through the internet. The answers were registered in the program google docs.  The participants mentioned successful methods and strategies, such as exercising regularly, the majority exercised 30 minutes at least five times per week.

The purpose of this paper is to examine how teachers choose to work with the teaching of reading and writing skills, how teachers justify their choice of teaching method and how the documentation of student development is being used. This paper also discusses the definition of reading and writing, phonological awareness and how different reading- and writing educational methods can be combined. The gathering of information has been done through a literature review in which I have looked at past research on reading and writing. I have also conducted qualitative interviews with teachers involved in literacy learning. The result of my research shows that it is not possible to determine which literacy learning methods that are most effective.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

Detta examensarbete är en undersökning i kommunikation genom konst och design.Det är ett gränsöverskridande samarbetsprojekt vars syfte är att skapa en diskussion kring ett fortfarande tabubelagt ämne. Genom ett gestaltande arbete i textila material undersöks hur vi på ett kreativt sätt kan bidra till samhällsdebatten runt övervikt och fetma. Projektet resulterade i två textila verk som gestaltar den nya svenska kroppen. En textil skulptur i form av en överviktig dalahäst och en folkdräkt för den nya svenska kroppen. I vår gestaltning använder vi oss av dalahästen och folkdräkten som symboler för svensken.