This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

This report describes the development of a web site for co-workers on leave of absence at Volvo Cars Engine AB and graduated students at Volvo Upper Secondary School in Skövde. The aim of the web site is to be a complement to existing communication channels in the promotion of the contact between the target group and the company. The work was divided into two parts; the first consisting of a preliminary study used to identify the information which the target group finds absent in their absence from their place of work/school, and the second part consisting of the development of a proposition of content layout and web site design. The finished proposition was presented along with a couple of alternatives for the technical implementation. The information department at Volvo Cars Engine AB in consultation with Volvo Cars IT will carry on the implementation, administration and further development of the proposed solutions..

Detta projekt har haft som mål att utveckla produktdisplayer för användning i butiker i syfte att exponera produkter som smycken, solglasögon eller liknande. Projektet är utfört som ett examensarbete vid Mälardalens Högskola inom produktutveckling med inriktning formgivning.Bakgrunden till projektet är att företaget X-ponent vill utforska en ny marknad. Det vill säga konsumentmarknaden istället för sin vanliga inriktning på industri. X-ponent har fått förfrågningar om produktdisplayer av mindre tillverkare av smycken och säljer idag en enkel variant till dessa.Uppdraget har gått ut på att ta fram tre koncept på produktdisplayer ett med ett eget användningsområde; en väggdisplay, för att kunna användas vid vägg; en golv display, för användning på golvet i butiken; och en bordsdisplay, att kunna ställa på bord eller disk. Displayens syfte skulle vara att exponera produkten och locka folk att köpa varför konsument psykologi och marknadsföring i butik studerades.

This Master Thesis is a product development project that has been carried out in cooperation withSvea Teknik AB. The company has developed an apparatus for attachment of a keel to a hull base ofa boat. The purpose for this thesis has been to compare a new concept of keel attachment incomposite material to thetraditionaldesign solution. This new keel attachment minimizes thedamages that may arise on the keel and the hull of the boat in shape of stresses impacts at grounding.Today it is a problem, relating to keel attachment on sailing boats having a fin keel or a bulbous keel.The manufacture focus on developing larger draught and shorter keel blades. The overall purpose isto increase performance of the sailing boat.The task for this thesis was to develop a concept of keel blade in composite material and investigateattachment to a sheet-shaped element.

Background: The latest development within the business world has been characterized by deregulation and globalization which has made the company bigger and even more influential. The increased power has resulted in a shift of responsibility for the community from the public to the private sector. (Steinholtz och Löhman, 2003) There have been many trends regarding what accountability includes and how financial accounting can be complimented in a useful and reliable way. Some trends have come to stay whilst others have shown to be less successful or the world has not been ready for them. (Larsson, a, 2002) Purpose: The purpose with this paper is to look at the historical development towards accounting for sustainability and to investigate what factors that might have hade an impact on this development.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

 Inse mitt värde och behåll mig en stund till är ett utforskande projekt i hållbar textildesign. Huvudfokuset i projektet är att utforska vilka möjliga designlösningar som kan ge produkter egenskapen av föränderlighet och på så vis möjliggöra en förlängning av deras livscykler. Detta undersöks utifrån ett eget formulerat förhållningssätt till hållbar design, genom praktiska experimentella undersökningar av olika material och föränderliga mönsterbilder. Detta kombinerat med att ge konsumenten en aktiv roll i förändring av en produkts utseende och funktion. Projektet resulterar i tre produktprototyper som på olika sätt gestaltar föränderlighet och det formulerade förhållningssättet.

External Thoughts is a studio based project with its purpose to throughworkshops establish contacts and create a dialouge about the content of contemporarygraphic design. The project also aims to apply a design curaticalmethod where the designer is both client and contractor, client and designer.We also wanted to investigate the design content as open-source and examinethe school versus the Internet?s future role in the design and for thedesigner. The project is a collaboration with Rasmus Östgård Ohlson fromBeckmans..

Syftet med denna studie var att undersöka vilka samband det finns mellan värderingar, föreställningar och normer kring miljön till agerande för ekologisk hållbarhet i det vardagliga livet. Vår hypotes var att det finns samband mellan affekter kring miljöns framtid och agerande till hållbar utveckling. För att söka svar på syftet och bekräfta hypotesen har enkäter med frågor gällande individens värderingar, föreställningar och normer om miljön samt frågor om miljömässigt agerande skickats ut via e-post till 119 deltagare i åldern 23-65 år. Svarsfrekvensen var på 59 procent. Resultatet visade att det fanns ett flertal starka samband mellan miljömässiga värderingar, föreställningar och normer till individens agerande och hypotesen om att det fanns samband mellan affekter och agerande för hållbar utveckling verifierades.

AbstractIn my work on language development in preschool the purpose was to examine how and to what extent the pre-school supports children with special needs in their language development. Trough qualitative interviews with four preschool teachers, I wanted to see how they work with language development in preschool. In the study, Main questions asked in the inquiry :How do teachers and support children?s language development?What techniques, resources and tools available to facilitate language development? The conclusion that I made from my inquiry is that the primary language stimulation methods teachers use to encourage children?s language development are rhymes telling, books reading and song singing based on active selection of pieces that match the children?s maturity level.And how they are using different language stimulation techniques Karlstad model, TAKK (Signs of augmentative and alternative communication) and TRAS (Early registration of language development) to promote children?s language development. Keyword: Language development, language stimulation, treatment, communication, methods..

This final thesis is a basic inquiry into a countryside programme for the municipality of Hässleholm. By interviewing people who live in the countryside in the municipality of Hässleholm I?ve tried to get a picture of how the thoughts on development of countryside are. Trough these interviews I?ve also tried to find out how people on the countryside defines the concept of countryside.

This report describes the process of developing a user-friendly and responsive archive website. The website is a Hi-fi prototype and was created for the company JG Communications, to serve as an archive for their customers? style guidelines. To create this website I have used HTML5 and CSS3 to make it responsive for various computer screens. I have also used PHP and some JavaScript to make some of the functions and Adobe Photoshop and Illustrator to make design elements for the prototype.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders. Now thanks to their new system they can access their documents easy and on demand through their intranet..