Titel: Innovate or Stagnate! ? Open innovation in manufacturing small and medium-sized businesses in Småland.The purpose of the study is that, from a leadership perspective (innovationmanagement), create a better understanding of open innovation in manufacturing small and medium-sized enterprises. The study therefore intends to contribute to the understanding of how open innovation processes leads to greater innovation in manufacturing small and medium sized businesses.We have used a qualitative research method and adopted an abductiveapproach. We made interpretations and created meaning based on our research results.Our theoretical framework is based primarily on Chesbroughs (2003) research on open innovation. Based on this model, we have selected a number of other theories, which we perceived as prerequisites for small andmedium sized companies in open innovation processes.

This thesis is the result of the author?s interest in music and electronics, namely the design and manufacturing of a stereo sound system with an active crossover. In short it can be stated that an active crossover has many advantages over its traditional passive counterpart. The active design naturally results in a more complex system comprised of a multiple number of components. This report deals with the theoretical aspects of preamplifiers, crossovers and power amplifiers as well as power supply and control.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Archaeological findings show that ski manufacturing goes back thousands of years in the Nordic region. There is a wealth of literature and film that deals with the subject, but it can be difficult to get an overall picture of how a specific type of traditional ski has been made. The starting point is the documentary "Skidmakaren i Gielas", where the viewer can follow Alfred Israelsson as he makes a pair of skis out of birch wood. However, the documentary lacks important information about how the skis are actually manufactured. Length, width and certain working steps are disclosed.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

Rapporten beskriver arbetsgången vid utvecklingen av ett kompressorkit till Yamahas snöskotermodell RX-1. Arbetet innefattar konstruktion och dimensionering av tryckkammare och laddluftkylare. Datorverktyg i form av CAD (Computer Aided Design) och FEA (Finite Element Analysis) har använts till att konstruera och dimensionera ingående komponenter. Arbetet har resulterat i kompletta CAD-modeller av ett prototypkit färdigt för CAM- beredning (Computer Aided Manufacturing) och tillverkning..

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

This report present the design and manufacturing of a wide-band driver amplifier placed in radar module for airborne applications. The major goals for the amplifier were a high efficiency and to deliver a predefined output power. To reach the second goal an additional preamplifier had to be constructed. The amplifiers were constructed in three steps: Design and Layout in the software Microwave Office, Mounting components and Verification. The driver amplifier was decided to be a push pull configuration consisting of two parallel transistors biased in class AB.

The aim of this project is to examine the needs and problems that exists amongst homeless people and to develop a solution that will help them in their everyday life. Since the homeless are a relatively large vulnerable group i Sweden, their everyday lives could be made easier in many ways.A clear definition of the target group is put together to create a good starting point. What state and help orginazations do to help the homelss and the society?s view of the homeless is also relevant and has been documented. Four personal stories have been put together to desicribe cases of clear problems existing in everyday life.Several interesting problems has been defined from the research and acceptance in the communtiy, desire to be seen and heard and a lack of confidence were the main needs.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

AbstractThis study deals with the tours carried out in the manufacturing sector, at Alfa Laval in Eskilstuna. A large number of visitors, from a variety of backgrounds, go there to see how the manufacturing of separators works. With visitors I refer to the company?s customers, suppliers, students, in- house trainee courses, managers and senior citizens groups.The study examines how these tours can be standardized using spatial design. The result shows the importance of working systematically with visualizing the work as well as the environment for optimizing the visitor's understanding.

In the last decades the continuous work for more sustainable manufacturing has become a large part of the manufacturing companies? operations. It is also well known that the factory planning shapes the manufacturing process to a great extent. Consequently it is logical to assume that the manufacturing companies? factory planning process plays a major role in the work for increased sustainability.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.