The mission was to create a prototype of a menu system for the companySystem Andersson AB. The instructions were that it has to be as interesting andmodern now as in 20 years. We had to look at technology from the cutting edgeof development to make our prototype survive in the future. WindowsPresentation Foundation (WPF) was the technique we focused on. There areonly a few applications that take advantage of WPF today, but it is predictedthat WPF will be the next generation method for developing applications to theWindows platform.To make our menu visually appealing, easy to use and at the same timefunctional, we followed the clear path and guidelines that are available ininteraction design.

Det finns idag behov till en undervisningsform som på ett roligt och enkelt sätt engagerar studenter till att lära sig om design. Studenter är olika och behöver olika undervisningsformer.Problemet löses via ett brädspel som är kunskapsgivande vilket får studenter engagerade. Under tio veckor har jag arbetat med ett testbrädspel för designstudenter som ett komplement till designundervisningen. Jag har intervjuat folk om design och skaffat mig kunskaper om hur en yrkesverksam designers tillvaro kan se ut. Tester av spelet har ägts rum för att se om det är underhållande och hjälp har tagits av yrkesverksamma brädspelsutvecklare och lärare för speldesign.Resultatet blev ett koncept till ett brädspel där det går att rulla ihop planen i en papperscylinder eller vika planen till en låda för att lösa förpackningsproblemet.

This Bachelor Thesis in the area of Computer Science and Work Science describes the process of design and development of an IT-tool between the municipality of Ron-neby and TietoEnator a development and consultancy firm, the Gothenburg office. The thesis focuses mainly on the cooperation between the consultant designer and the local municipal. Through cooperation, the organisation is incorporated into the tool and the tool is incorporated into the organisation. Concepts that are central in this thesis are design, cooperation and tailoring. A question raised is, if distance work and extensive cooperation might be a good way of working in the process of design and development, when the organisation is being incorporated into the tool. Advan-tages and disadvantages of this way of working are discussed. Our studies show that distance work is a good complement for personal meet-ings between designer and co-developer.

In the report we have investigated four high-rise buildings with the intentions to find out witch parts are prefabricated and what relation can be found between structural design, prefabrication and the logistics. After the investigation we noticed that the grad of prefabrication in each one of the projects is good in relation to what purpose the building have and the given background. During the report we found that layout ? structural design ? prefabrication ? logistics is an order that we think can make the production of the building more effective if followed. We believe that the prefabrication of high-rise buildings have potential to grow and get more optimized in the future..

The IT industry is constantly evolving and requires everyone working with website development to be updated on the latest methods. The web grows larger every day, and more visits are carried out by mobile devices. It is more important than ever for companies to have updated and functional pages that can be used on different platforms. We want to find out how common it is for IT departments and web agencies to embrace the newest technology and also what it takes to get them to move from one technology to another. Responsive web design is a constantly growing new technique that helps web developers developing for different platforms.

Implementering av FIR filter kan göras på olika sätt. I detta examensarbete har två olika varianter beskrivits med hjälp av VHDL, syntetiserats, simulerats och sedan jämförts med avseende på effektförbrukning..

The purpose of this study was to examine how the design of the wards, at Björnkulla nursing home, affects the residents? wayfinding ability and autonomy. Thus, the aim has been to make a design proposal that, trough color and design can increase the residents? chance to independent mobility. Since the study aimed to examine how the environment affect and can support people with dementia, qualitative methods were used.

The project aims to explore how strong brands are built and what they consist of. I will focus on the subject fashion magazine, ambassadors and the different parts that a magazine consists of. Based on the information from research and literature I?m re-designing the Swedish fashion magazine Solo..

This report deals with the design of a controller for SmartMedia? flash memory cards, based on a hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

Datum:10 juni, 2013 Nivå:Kandidatuppsats i Innovationsteknik, 15 hp Institution:Akademin för Innovation, Design och Teknik, IDT, Mälardalens Högskola Författare:Philip dos Santos Jadidi , 1990; Amanda Nydahl , 1987 Titel:Design för våra sinnen En kvalitativ studie över hur design påverkar välbefinnandetHandledare:Petra Edoff Nyckelord:EBD (Evidensbaserad design), Design, Välbefinnande, Väntrum, Sinnen. Frågeställning:Hur kan ett ökat välbefinnande skapas via utformningen av den fysiska miljön i ett väntrum utifrån våra sinnen? Syfte:Studiens syfte är att undersöka och skapa riktlinjer för att öka välbefinnandet hos patienter, utifrån att skapa en miljö som tar hänsyn till de fem olika sinnena (syn, lukt, smak, hörsel, känsel). Metod:Studiens tillvägagångssätt genomfördes kvalitativt. Där teori insamlades via en omvärldsanalys från bland annat olika elektroniska databaser som Google, Google Scholar, PsycInfo, Sage Journal, ScienceDirekt och Google Books.

This paper presents the creation of a strengthening visual profile for StretchFlex UF. The project consists of an external as well as an internal part. The external part is on the order of the company StretchFlex. The company is created under the education concept by the name of Ung Företagsverksamhet (Young Entrepreneurship) and has passed on to the Swedish Championships in Young Entrepreneurship at the Stockholm International Fairs. Of that we have been commissioned to develop an updated logotype for the company, for the current does not keep proper quality according to the client.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

Förpackningen blir viktigare och viktigare och är ibland den enda kommunikationskanalen gentemot konsumenten, speciellt i små familjeföretag.Persgården är ett litet familjeföretag som är beläget ute på Visingsö och de säljer ekologisk müsli, dadlar i olika former samt frukt & nötmix. Problemet Persgården har idag är att alla deras förpackningar inte genomsyrar samma känsla och förmedlar deras kärnvärden. I och med det har vårt arbete gått ut på att göra en re-design av Persgårdens förpackningar.Vårt främsta syfte var att förändra Persgårdens befintliga förpackningar för att de skulle få ett mer enhetligt utseende mot kunden och för att konsumenterna lättare skulle känna igen alla förpackningar i serien. Syftet var även att Persgårdens förpackningar skulle sticka ut från andra liknande produkter på marknaden. Syftet var också att få en inblick i hur processen av framtagandet av en livsmedelsförpackning går till.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..