The employer is obligated to call for negotiation on his own initiative, before he makes decisions in questions, which constitute important changes of the employer?s business or of the worker?s working conditions and terms of employment. The obligation to negotiate is reserved to the organisations, which the employer has collective agreements with. But what does the concept of important changes mean? What areas are included in the concept of important changes, according to legal framework and case law? How extensive is in fact the employer?s obligation to negotiate? The purpose of this report has been to seek answers to the above-mentioned questions, through partly describing how the employer?s obligation to negotiate has developed, and partly describing how the codes of negotiations in the Employment (Co-Determination in the Workplace) Act of 1976 are raised and applied.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Purpose: The purpose of this paper is to examine if POC manage to keep cohort interplay between their identity and image.Theoretical framework: This paper is led from theories in area about communicating identity and image. The theories that are relevant to this paper to see the interplay between identity and image is communication theory and brand theories based on associations. From these theories we have composed a model that shows the communication led from identity throughout image in company?s with many distribution channels. It shows what associations that build identity and image and also the complication and threat that the interplay is being exposed to.Methodology: We have chosen to do this examination as a case study.

The aim of this political scientist paper is to describe and analyze the quasi state Iraqi Kurdistan 1992-2006 using the theory of Kolstö about how and why quasi states develops and the theory of Pegg regarding how the international society deal with quasi states. A qualitative case method is used. In the study the two theories are combined. Iraqi Kurdistan is used as a case to study to confirm Kolstö?s and Pegg?s theories.

Denna uppsats bygger på empiri kring ett case som utgörs av en dold konflikt mellan endel av surfkulturen i Varberg, Apelviken och Varbergs Kommun. Vi upplevde att detfanns en uppdämd konflikt som av olika orsaker blivit hindrad att nå ut. Uppsatsens fokusligger på den narrativa kopplingen i författandet av en managementberättelse som utgårfrån en case study.Vi bjuder Dig som läsare på en berättelse i vildavästernmiljö som handlar om livet i dennordamerikanska staden Coastville. På vintern är det mestadels kallt men undersommartid samlas både människor men också? problem.

I denna rapport behandlas frågor som rör extern validering och datorstöd (CASE) för detta. Rapporten redogör för en undersökning vars syfte är att ta reda på vilka krav som tekniker för extern validering ställer på CASE-verktyg och hur verktygen svarar upp till dessa krav. Olika metoder finns för att skapa ett informationssystem och varje metod har sina beskrivningstekniker som underlag för extern validering.De beskrivningstekniker som föreskrivs i en metod är ofta mycket detaljerade. En metods notationen ställer därför stora krav på CASE-verktyg som uttalar stöd för denna metod.Arbetet som beskrivs i denna rapport identifierar krav på datorstöd utifrån en viss metods beskrivningstekniker samt ytterligare valideringstekniker som beskrivs i litteraturen. Därefter undersöks CASE-verktygs förmåga att svara upp till dessa krav.Själva undersökningen av verktygen genomförs via ett testförfarande där samtliga utvalda verktyg implementerar två olika testfall.Resultatet från genomförandet av tester visar att det existerar stora skillnader mellan verktygens påstådda stöd för en viss metod och vad de faktiskt klarar av.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

The aim of this thesis is to examine the customer profitability in a wholesale company. A case study of Eugen Wiberger AB has been conducted. Firstly the authors have examined the current perception of the company regarding their customer profitability and the results of their calculation of the customer profitability. Secondly an Activity-Based Costing analysis has been performed and has been compared to the perception in the case company. The conclusions are that the smaller customers are the least profitable, and in some cases unprofitable, whereas the larger customers are profitable.

The purpose of this thesis was to examine why so many CRM-projects didn`t reach the expected goals that companies management envisaged. The purpose was divided into two research questions. ? How should companies? management design the strategic projection of the CRM implementation? ? How will employees? attitude to changes influence the result of the CRM implementation? The case company was a Swedish technical consulting company: interviews were conducted with two represents from two different departments. The findings of the study were that management often strongly believes that software will sort out most of the upcoming problems and forget the factor that education of employees is at least equal important.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

Det här arbetet preciserar ett problem utifrån ett problemområde som faller inom ramen för användarcentrerad design. Den preciserade problemformuleringen är: I vilken utsträckning kan ett gränssnitt göras användbart genom prototyping, aktiv användarmedverkan och iterativ utveckling genom användningen av en modifierad version av ISO 13407 standarden som ett utvecklingsramverk? Den här frågeställningen har tillämpats och avgränsats till ett pekskärmsgränssnitt vid namn Navigator som är utvecklat av Asko. Resultaten visar att de gränssnittsprototyper som har skapats är användbara. Vidare visar resultaten även att det inte är tillräckligt att enbart använda tre nyckelprinciper för användarcentrerad design i syfte att uppnå användbarhet..