In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

This bachelor thesis discusses various difficulties with architectural paint research. The difficulties are exemplified through a case study ? a paint research on a furrowed string-course in the southern vault of the Royal Palace of Stockholm, which was carried out November ? March 2009-2010 on behalf of Statens Fastighetsverk. The paint research was made in order to receive information about the string-course and to get inspiration for a renewed color scheme on it. The base material of the string-course is Gotlandic sandstone and the surface of it is furrowed.

Denna rapport redovisar den process som utvecklingen av OTWs nya webbplats har inneburit. Jag har arbetet med att skapa en ny design av deras nuvarande webbplats där syftet har varit att skapa en webbplats där man presenterar sig själva på ett bra sätt och ställer mindre krav på redaktionellt innehåll samtidigt som man följer konventioner för branschen och målgruppen. I utvecklingen av webbplatsen anpassar jag mig efter rådande designprinciper och riktlinjer för användbarhet så att webbplatsen ska bli så lätt att använda som möjligt. Utvecklingen av prototypen har skett i mjukvaruprogrammet Axure RP. Resultatet av projektet är två interaktiva digitala prototyper i form av en mobil version samt en desktopversion.

Bakgrund: I konkurrens om morgondagens konsument kommer sannolikt materiella värden inte räcka till. Företag måste också kunna erbjuda immateriella värden genom upplevelser. Ett sätt att göra detta är via produktens design. Den företagsekonomiska relevansen understyrks ytterligare av det faktum att lite forskning finns kring immateriellt värdeskapande och design. Syfte: Syftet med uppsatsen är att bidra med förståelse för hur design kan tillföra immateriella värden till en produkt.

Som grafisk designer jobbar man med att förmedla budskap via exempelvis affischer, tidningar och broschyrer. En del av designprocessen är att välja vilket papper som ska användas vid tryckningen. För att kunna välja ett papper som främjar budskapet måste det först finnas förståelse för hur människor uppfattar olika sorters papper och vilken påverkan papperet har på människors tolkning av budskapet.Detta arbete visar genom research och undersökningar vissa generella uppfattningar och åsikter som finns om papper. De huvudsakliga faktorerna som inverkar på hur ett papper uppfattas är papperets tjocklek, struktur och yta. Arbetet visar även att papperet är en del av budskapet, då ett tryckt budskap inte kan skiljas från det papper det är tryckt på.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

This master thesis covers the design of a special garden room, The Hardscape Room, in The Rehabilitation Gardens at Alnarp, in southern Sweden, as well as describes the design process. The Rehabilitation Gardens are intended to serve several purposes. It will offer horticultural therapeutic treatment programs for people diagnosed as having had burnout disease for an extended period. Research is also aimed at studying the possible impact of different garden design hypotheses as well as different forms of horticultural therapy. In The Rehabilitation Gardens at Alnarp the most extreme and demanding garden room focused on cultivation and horticultural therapy is The Hardscape Room.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

Det här arbetet preciserar ett problem utifrån ett problemområde som faller inom ramen för användarcentrerad design. Den preciserade problemformuleringen är: I vilken utsträckning kan ett gränssnitt göras användbart genom prototyping, aktiv användarmedverkan och iterativ utveckling genom användningen av en modifierad version av ISO 13407 standarden som ett utvecklingsramverk? Den här frågeställningen har tillämpats och avgränsats till ett pekskärmsgränssnitt vid namn Navigator som är utvecklat av Asko. Resultaten visar att de gränssnittsprototyper som har skapats är användbara. Vidare visar resultaten även att det inte är tillräckligt att enbart använda tre nyckelprinciper för användarcentrerad design i syfte att uppnå användbarhet..