The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

Todays travel trends go towards independence and self planning. If you need advice or help when performing your trip, there are several different series of guidebooks on the market and one of these series comes from the travel magazine Vagabond. This degree project concerns the redesigning of the travelguides of Vagabond, or to be precise: their cityguide over Istanbul. The purpose of the new design is to assure the resemblance between the guidebook and the magazine, as wanted by the Art Director of Vagabond Angelica Zander.Prior to the redesigning process preliminary studies that make up the fundamental ideas were made. Three other big titles of guidebooks on the market were analyzed, and in addition a great deal of focus ? considering the final purpose ? was put on the concept of magazine design.

This account deals with my degree in furniture design. The project was done in collaboration with the architect firm Byggnadskonst AB in a quest for the cafe chain "Vivels"Byggnadskonst AB?s mission was to make the interior of the cafe that Vivels is building in Larsberg Center on Lidingö. My assignment was to design chairs for the café. In the beginning I had even thought about designing a table, but as time past I focussed more and more on the chairs.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

Syftet med denna studie var att identifiera problem och behov som byggare i Sverige stöter på i sin vardag samt anordna en workshop där produktutveckling utifrån dessa behov diskuteras, samt hur denna information kan användas i produktutvecklingen. Studien grundar sig i teorier om innovation, behov och kvalitet, behovsidentifiering, innovationsspridning, produktlivscykel och metoden NABC: Need, Approach, Benefit, Competition. Grunden till arbetet är en föreställning att produktanvändare har behov som dem själva inte är medveten om. Genom att utgå från dessa omedvetna behov kan en bättre produkt utformas. Empatisk design (deltagande observation) användes för att kunna upptäcka outtalade behov samt skapa en god förståelse för byggarnas naturliga arbetsmiljö.

Ljudet a?r ett intressant kommunikationsmedium som utnyttjar varje individsegna erfarenheter och fo?resta?llningar da?r associationer fa?r stort utrymme. Mu-seer som idag kan va?lja fra?n ett stort urval av medier har mycket att vinna ge-nom att anva?nda sig av ljud - inte enbart fo?r att tekniken tilla?ter det.Den ha?r uppsatsen har fo?r avsikt att underso?ka ljudets mo?jligheter som kom-munikationsmedium i utsta?llningar. Syftet a?r att sprida ljus o?ver detta fo?rha?l-landevis outforskade omra?de som jag anser har ma?nga outnyttjade mo?jligheter.Fo?r att avgra?nsa min underso?kning har jag valt att studera utsta?llningen Dro?m-mens syster som finns pa? Va?rldskulturmuseet i Go?teborg.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

Technical products are becoming more and more complex, this means that the drivers, mechanics and service personnel?s need for assistance such as the service literature is increasing. In this degree project the focus is on the technical manuals of Scania?s Workshop Manual. Today, the information in the Workshop Manual consists of collaboration between text and illustrations.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

Websites today only offer simpler form of technical analysis and are not fun to use, therefore student decided to build a website that makes technical analysis a bit more fun by giving user possibility to experiment with settings for technical indicators and also see clear visible results from analysis. Student decided to build website in ASP.NET. Technical indicators for this project only consist of those who give buy and sell-signals via cross-over, no divergence or pattern finding.This project has three questions that define this project. It?s important that there is good functionality so that performing an analysis is perceived as simple, one question is therefore; what functionality for website is needed in order for analysis to be perceived as more simple?Technical analysis is a pretty complex subject and demands an interface that is perceived as easy to understand and easy to use, it?s therefore important that the interface is well designed, second question is therefore; how should the interface be designed to be user-friendly?When systems grow large they often become hard to develop and later on unmaintainable because of the accumulated complexity and dependency between classes, the code is a mess, the last question is therefore; how can the systems complexity be eased with object-oriented design principles?Jakob Nielsens ten heuristics for User Interface Design were used as inspiration for designing the interface for the website.

Jag har i mitt examensarbete jobbat med framtagningen av en vattenflaska för en hållbar utveckling. En vattenflaska där användningsområdet är för vardagligt bruk. Arbetet har en inriktning mot estetik och hållbarutveckling. Jag har tittat på vilken miljöinverkan buteljerat vatten har, undersökt estetik som begrepp och gjort research. Detta är sedan följt av en designprocess innehållande skissprocessen, användarstudie, och designmetoder vilket leder fram till en prototyp av en produkt.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

Quality assurance for Scania engine componentsScania engines have become one of the world?s most renowned corporations in themanufacturing of engines. This is mostly due to the quality and performance thatScania have shown. However, this does not stop Scania from trying to achieve moresuccess in the fields of development and research to assure the quality of theirengines.The purpose of this thesis is to show how Scania ensures the quality of the enginecomponents, both those who made externally and internally at Scania, also inclusivethe manufacturing and assembly process.Three engine components were examined: D16 block engines, water pump andXP-Iinjectors. The study included the whole process from the step of supplying therow materials to the last step in production functional test.In this thesis an investigation of how other companies are working with qualityassurance was conducted.

Detta examensarbete handlar om förskollärares tankar om verbal och icke-verbal kommunikation i samlingssituationer. Syftet med studien är att visa förskollärares upplevelser av förhållandet mellan verbal och icke-verbal kommunikation under samlingssituationer i relation till den pragmatiska aspekten av barns språkutveckling. Frågeställningarna som arbetet bygger på är: Hur ser förskollärares uppfattningar ut beträffande användandet av den icke- verbala kommunikationen i samlingssituationer på förskolan? Hur ser förskollärares uppfattningar ut beträffande användandet av verbal kommunikation i samlingssituationer på förskolan? Det empiriska materialet har samlats in genom intervjuer av verksamma förskollärare och utgör tillsammans med tidigare forskning samt relevant litteratur för ämnet grunden för resultatet och analysen. Analysen har sin utgångspunkt från Maurice Merleau-Ponty utifrån fenomenologin.