Jag fascineras av produktion och hur vi bemästrar tekniker för att skapa vår omgivning. Vi implementerar vetenskap på material och kallar det ingenjörskonst. I mitt examensarbete utgår jag från materialet trä, som är levande och varmt, och genom traditionell böjträteknik formar jag det. Jag fördjupar mig i tekniken genom studiebesök, egna experiment samt teori.Men detta är också design, jag skapar åt användaren. Många av mina timmar går åt att undersöka, utforska och leta form och funktion.

Syftet med studien var att ta reda pa? hur man kan fra?mja lek fo?r barn med autistiska symptom som bor pa? korttidsboenden. En kvalitativ intervjuunderso?kning gjordes med sex deltagare och analyserades sedan genom en tolkande fenomenologisk analys (IPA). Fyra huvudteman med tillho?rande tva? underteman var valdes ut.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Denna studie har som syfte att ta fram ett designförslag på ett ögonrörelsestyrt infotainment-system samt utvärdera detta. Fokusen ligger på den funktionella design och dess för- och nackdelar. Studien tar upp tre olika designförslag varav ett valdes att göra en prototyp av. Prototypen skapades med hjälp av HTML5, Javascript och Python. Detta kopplades sedan samman med ett ögonrörelsesystem tillhörande Smart Eye AB.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

Our employer, Gaddad, is a tattoo and piercing community that was created in 2006 with the basic idea to make it easier for people to get in touch with the tattoo artists and piercers from all over Sweden. With the homepage?s popularity at 2009 they decided to expand with the news page Inkzine. 2011 they contacted us with a plan to expand the homepage to Europe and then merge their two sites under the name Inkzine.The goal of this project was to create design suggestions for Gaddad / Inkzine that both the administration and the current users liked and would consider implementing on the website. In order to evaluate the current design and our suggestions we decided to use two questionnaires .

This paper is about transferring a feeling from a physical place to the Internet. The paper explores methods on how this transfer is done. Websites have a tendency to not portray the company behind it in a correct way. For companies with a distinct esthetic and work hard on their image and brand it is important that this hard work is portrayed correctly in every aspect. The problems this paper explores are: the importance of personas in a design process, methods of transferring a feeling from a physical place with design and how this can be tested, and using open-source content management systems in creating usable websites.

The following is an explorative work on various forms of collaboration. The core of our exploration revolves around the idea of co-operation as a tool for examination, a collective working method, the input/output within creative practices as well as a phenomena in its own right? It is however not ?simply? about collaboration, but rather places as much focus on a highly personal search for new working methods, new approaches towards research and on the development of our relationship to graphic design. From beginning to end, the entire project has become a work whereby the term ?we? has been more important than ?me? ? a well-functioning project with a common purpose: a collaboration, between us..

Vår kandidatuppsats handlar om användning och utveckling av Kustpilens biljettautomat. Vi har, genom etnografiska metoder, studerat hur människor använder sig av biljettautomaten vid köp av en tågbiljett. För att generera designidéer och utveckla vårt designförslag har vi utgått från dessa studier. Vi har sett hur viktigt det är för användarna att få feedback på utförda handlingar. Biljettautomatens design är viktig för att uppmana kunderna till rätt användning.

The purpose of this study was to develop recommendations for using more efficient lighting and better graphic design to create a more uniform structure in the exhibition hall ?Road to the past? in Jönköping County Museum by answering the following questions at issue:1) How are the objects in the exhibition hall ?Road to the past? exposed today?2) How can you use lighting and graphic design to create structure in the exhibition and strengthen the expression in the exhibition?Our work is based on observations and open group interviews. We observed the exhibition hall ?Road to the past? during day and evening. In the same hall, we observed a guided tour that we followed up with open group interviews.

This Bachelor?s thesis consists of two parts; one with prefabrication (prefab) in focus and thesecond part includes detail design of a house project. These parts are linked together by designingsome parts of the house project as prefabricated.The focus section investigates how prefabrication can act time-, costs- and environmentallyeffective to a building project. This is investigated by combining literary sources with sourcesbased on reality in the shape of interviews. The result of the investigation is that prefabcould acteffectively on previously mentioned factors,if this way of building is used in a proper way.The detail design of the house started in a residential area with a new local plan in Huddinge,named Sjöängen II.

Vid design av IT-system krävs en förhållning till de specifika egenskaper som finns i den miljösystemet är tänkt att användas. Även om användningen ser liknande ut krävs en detaljeradanalys av det specifika sammanhanget för att få en djupare förståelse för hur det verkligaanvändningsområdet ser ut. Det har visats sig uppkomma användbarhetsrelaterade problem vidförflyttning av ett system från en stationär miljö till en mobil miljö. Rapporten har undersöktvilka utmaningar som uppkommer när ett system flyttas från en mobil miljö till en annan snarlikmobil miljö och tar sin utgångspunkt i Ecodriving-lösningar för tunga fordon. En kvalitativundersökning genomfördes för att undersöka och identifiera de utmaningar som uppkom.Analyserat material låg till grund för framtagningen av en prototyp.

When forces in foundation piles are calculated according to classic theory, thefoundation are assumed to be infinitely rigid which means that the foundation will notbend. High buildings need their whole width to be stable and use the ground floorwall as a foundation. But when, for example windows are needed in the ground floorwall, the stiffness of the foundation decreases which change the forces in the piles. Inthis report the difference of pile forces versus classic theory has been analyzed, and ifpile forces can be calculated as in classic theory. Further on, the effects of the wallmovement were analysed and how the buildings crack safety would be affected by themovement at the ground floor.