Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

The building industry are currently going through a huge alteration. The introduction of BIM (Building Information Modeling). Which also implements a lot of new ways of solving problems that building modeling can cause. This report is written for Uppsala University in cooperation with Temagruppen in Uppsala. However, it contains a comparison between two different systems that checks building models.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

Stratego is a boardgame not very different from chess, that contains hidden information. Because of this, existing programs play at beginner level. The purpose of this thesis is to adjust a minimax algorithm so that it passes the demands of Stratego, and then build a Stratego agent around it. Tests with existing minimax algorithms leads to the development p-e-minimax. This algorithm uses two different values in its nodes to simulate the different information available to the agent and its opponent.

The purpose of this paper is to analyze the ongoing changes in German family policy. It explores the issue of whether the German welfare state, in this policy field, can still be regarded as a conservative welfare model or rather approaches a more liberal or social democratic model. A qualitative method is used to analyze the material, especially from the German government, including press releases, other public documents and also articles from the political weekly magazines Der Spiegel and Die Zeit. The changes analyzed are the new parental benefit, the expansion of child care, the concept of whole-day schools and the system of joint taxation. The point of departure is Gösta Esping-Andersen?s categorization of three types of welfare states: the social democratic, the conservative and the liberal.

Background: For an individual a surgery may involve strains and risks. Many patients experience a loss of its own identity and often an inability to control the situation while going through a surgical operation. Fear of pain or to not wake up from the anesthetic or that the surgery will fail are worrying factors that some people experiences. Purpose: The purpose was to describe patients? perceptions of preoperative information in connection to elective surgeries.

AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This quantitative study explores how employee perceived efficiency within customer service is affected by standardized routines, digital tools, and motivational factors. The study is based on survey data collected from 42 employees across five customer service departments in a larger organization. The theoretical foundation integrates Weber?s bureaucracy theory, the Technology Acceptance Model (TAM), and the Job Characteristics Model (JCM), allowing for a multidimensional analysis to capture the employees' experiences of efficiency. Findings reveal a statistically significant positive relationship between perceived efficiency and both standardized routines and perceived digital tool usefulness and ease of use. Furthermore, the study identifies that skill variety and task significance are positively correlated with experienced meaningfulness, which indicates a potential mediating relationship between these motivational aspects and perceived efficiency.

This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

Problem The culture sector is characterized by qualitative goals which raise questions such as how do you measure culture and what is ?good? culture? Both the goals and the measurements tend to result in subjective judgments, which according to the theory make result control inefficient. Yet, result control is frequently used in the culture sector; which leads up to our research question: What characterizes the problems of result control in the culture sector?Purpose The aim of this study is to make a survey of how the Gothenburg Opera works with result control and follow-up. By defining how it tackles the different problems, which could arise with result control in a non-profit organisation, we aim to map how the problems regarding result control are characterized in the Gothenburg Opera.

Syftet med studien var att belysa socialsekreterarnas psykosociala arbetsmiljö och undersöka om det fanns ett samband mellan deras psykosociala arbetsmiljö och kvaliteten på arbetet de utför där hypotesen var att ett sådant samband existerar. Undersökningen genomfördes bland alla socialsekreterare i Värmlands län genom en webbenkät. Populationen bestod av 284 socialsekreterare varav 171 svarade på enkäten vilket gav en svarsfrekvens på 60,2 %. De teoretiska utgångspunkterna för studien har varit Karasek och Theorells krav-kontroll-stöd modell samt Socialtjänstlagen, 3 Kap. 3 §, tillsammans med Socialstyrelsens kvalitetsområden.

This essay aims to examine managers experiences of control at the workplace within the property sector, and how these experiences differ between female and male managers. This study is a qualitative single case study that intends to offer a deeper understanding of a unique case and uses an abductive method approach. The essay is based on two main theories, Foucault?s (2003) theory of control and the gender system of Hirdman (1988, 2001) and is supplemented by previous studies of the modern workplace. The study is based on eighteen semi-structured interviews that aims to capture the participants personal experiences regarding control at the modern workplace, and the norms, surveillance, hierarchies, and self-discipline that make up this control.