High heels ? a fashion that has not gone out of style after hundreds of years. Despite their esthetic advantages, high heels become uncomfortable and harmful after repetitive and long term use. With this as a starting point, Huyen Nguyen ? a student at the Innovation Engineering Program at the University of Halmstad ? decided to make a final thesis project. The project goal has been to combine the esthetic advantages of high heels and bring a comfortable solution to the equation.

This study was the foundation for an evaluation of an employment project in Sweden. The project offers occupations in carpentry as well as kitchen work for people with psychiatric disorders, substance abuse and other social difficulties. This studies purpose was to analyze the projects significance to its participants and also to distinguish weather the project influences the participant?s life in a professional or private way. The methodological tool was five qualitative interviews with the participants and three qualitative interviews with the employees.

Project management has been a very popular way of conducting information system development in the past years. Among all major information system developing companies today, almost everyone work in some form of project management. Our objective with this study has been to find out if there are any problems that begin in the early part of the project. Problems that, if they aren?t solved directly, can become bigger problems later on in the project.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The work in project has been around since humans began to hunt in groups, building bridges or building of the Great Wall of China. In 1960- and 70´s, the word project got their value it has today. A project means a work done during a decided time, with decided economy and non-recurring nature (Jansson and Ljung 2004). The projects had a general analytical model. It was used for all projects the organization engaged.

This is a Bachelor?s Degree project withthe aim of investigating how to preventwarranty errors in apartment buildings.Our goal has been to compile the mostcommon warranty errors and the reasonbehind them.To achieve this goal, we have studiedthe warranty protocols from fiveprojects. We also performed interviewswith people who work in house productionand people who work with warranties. Thepurpose of the interviews was to findout the underlying causes of warrantyerrors and what one could do to preventthose.Cracks in walls and ceilings were themost frequent remarks on the warrantyprotocols. Remarks on the floors,windows and doors were also common, butnot to the same extent.

The Degree project was made forZetterbergs Industri AB. The company is market leading in Europe in the heavyvehicle industry, designing and building body systems for trucks.In their line of products is the hook lift called Livab, a flexible and uniqueproduct. The hook lift is often demanded by customers because its special ability tobe able to operate in situations with low roof clearance. The main operation principleof the hook lift can be described as a truck stand, laid down.There are two main versions of the hook lift Livab, AL 26 and AL 32. These are ofdifferent load capacity, 17 and 25 metric tons of gross weight respectively.

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

This report contains a Degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

SummaryI have a great interest in bouzoukis and since I, during my education in guitar making, mainly have focused on building bouzoukis and other traditional folk instruments, I have chosen the bouzouki as the object of my Degree project.In connection to the making of these instruments, I started to consider the construction of the bouzouki and why the bouzouki has such a characteristic sound.One of my theories is based on the fact that most bouzoukis are made with floating bridges instead of glued pinbridges. Do these types of bridges differ from each other tonally and if so, how much and in what way?To receive answers to my questions, I have built two identical bouzoukis with different types of bridges, one with a glued pinbridge and one with a floating bridge. I have been very precise in the making of these instruments, giving them the exact same dimensions and using material from the same piece of wood. This to make sure that the instruments should be as exactly alike as possible.After finishing the making of the bouzoukis, I arranged for a sound test where I let musicians play and listen to the instruments.

I got a request from Eleiko Sport AB regarding them needing help with trying to improve one of their products. The following examination project includes the principal- and primary construction reports within trying to make some improvements and optimizations on a stand for Kettle bells. I have in this project both made my own proposals to the stands legs, proposals on how to strengthen the shelf and also made an optimization of the original Kettle bell-stand. In this report, the project goes from idea to being built and analyzed in Catia, including the creation of drawings and material definition..

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

AbstractThe aim of this thesis is to investigate an experimental work in the region of Kronoberg and to study, from the actors? point of view, what possibilities there are for cooperation when it comes to hastening the introduction for newly arrived immigrants on the labour market, and also what possibilities the cooperation entails for the newly arrived immigrants to integrate on the labour market. The thesis employs the following research questions to answer the purpose:How do the actors in the project work to fasten the introduction to the Swedish labour market?Which opportunities and obstacles do the actors experience for cooperation in the project?Which consequences do the actors experience that cooperation in the project bring for the newly arrived immigrants? opportunity to integrate on the labour market?In order to answer the questions, ten actors involved in the project have been interviewed. Also written documents have been used.The conclusion of the study is that explicit goal and explicit division of the responsibilities in the project have made the cooperation easier.

This bachelor Degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.